• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.474-479
• /
• 2004

This paper presents an economical solution of the control system of robot, which is widely applied to sophisticated robots. The proposed control system is built on a foundation that is combined between driver motor, PC controlled servo-motor control card, and driver software. The solution had been applied to design hardware of controlled 6-DOF (Degree Of Freedom) robot. The controlled system is used to control VML Robot (Vehicle Mechatronic Lab). Addition, because of flexibility of the solution, the controller can be suit with widely robots at used servo-moto.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.149-156
• /
• 1995

본 연구의 목적은 6자유도를 가진 병렬형 메니퓰레이터의 기구학적 해석을 하는데 있다. 일반적인 산업용 로봇의 구조는 링크가 직렬로 연결된 형상을 하고 있으며 이러한 형태는 넓은 작업공간의 확보와 유연성이 뛰어난 장점이 있는 반면에 각 링크의 오차가 메니퓰레이터의 끝단에서 누적되어 나타나게 되고 구동렬이 증가하게 되는 단점을 지니고 있다. 이러한 단점을 극복하기 위하여 정밀한 위치제어가 필요한 경우에는 병렬형 형태의 링크를 지닌 구조를 사용하고 있다. 병렬형 메니퓰레이터의 역기구학적 해석은 비교적 단순한 데 반하여 정기구학적 해 석은 비선형 방정식의 형태로 나타나며 해석적으로 그 해를 구하기가 쉽지 않다. 본 연구에서는 6자유도를 지닌 병렬형 메니퓰레이터의 기구학적 해석을 수행하였으며 예제를 통하여 검정하였다.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.560-567
• /
• 2007

The objective of this research is to optimize the designing parameters of the parallel manipulator with large orientation workspace at the boundary position of the constant orientation workspace (COW). The method uses a simple genetic algorithm(SGA) while considering three different kinematic performance indices: COW and the global conditioning index(GCI) to evaluate the mechanism's dexterity for translational motion of an end-effector, and orientation workspace of two angle of Euler angles to obtain the large rotation angle of an end-effector at the boundary position of COW. Total fifteen cases divided according to the combination of the sphere radius of COW and rotation angle of orientation workspace are studied, and to decide the best model in the total optimized cases, the fuzzy inference system is used for each case's results. An optimized model is selected as a best model, which shows better kinematic performances compared to the basis of the pre-existing model.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.260-260
• /
• 2017

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.315-324
• /
• 2019

This paper present a novel 6-axis robotic base platform with force/moment sensing. The robotic base platform is made up of six loadcells connecting the moving plate to the fixed plate by spherical joints at the both ends of loadcells. The statics relation is derived, the robotic base platform prototype and the loadcell measurement system are developed. The force/moment calibrations in joint and Cartesian spaces are performed. The algorithm to detect external force applied at a working robot is derived, and using a 6-DOF robot mounted on the robotic base platform, force/moment measurement experiments have been performed.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.953-959
• /
• 2021

In this paper, the numerical inverse kinematics analysis is presented for a collaborative robot with an offset wrist. Robot manipulators with offset wrist are widely used in industrial applications, due to many advantages over those with wrist center and those with three parallel axes such as simple mechanical design, light weight, and so on. There may not exist a closed-form solution for a robot manipulator with offset wrist. A simple numerical method is applied to solve the inverse kinematics with offset wrist. Singularity is analyzed using Jacobian matrix and the numerical inverse kinematics algorithm is implemented on the real-time controller.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.9-14
• /
• 2018

가스스프링은 가스가 압축될 때 가지게 되는 압력을 스프링과 같이 사용하는 형태로, 광범위한 산업분야에 사용되고 있고 그 수요 또한 증가하고 있다. 이 가스스프링은 압축 스프링과 인장 스프링으로 나뉠 수 가 있는데, 압축 스프링과 달리인장 스프링의 경우는 피스톤 속도 제어에 대한 연구가 많이 이루어지지 않았다. 본 연구에서는 2중 실린더 구조를 갖는 인장 가스스프링에서의 압력 손실 계산을 통하여 피스톤 반발압력의 크기를 이론적으로 예측하였고, 피스톤과 실린더 사이의 마찰이 작은 경우와 큰 경우에 대하여 피스톤의 실제 거동을 모사해 보았다. 수치해석을 위해서는 유동해석분야에서 가장 널리 사용되고 있는 FLUENT를 이용하였고, 피스톤의 거동을 모사하기 위하여 FLUENT에서 제공하는 6-DOF 모델과 사용자정의함수(User Defined Function)를 사용하였다. 격자는 Layering 기법만으로도 Dynamic mesh가 성공적으로 구현되도록 피스톤 전후의 유동영역을 따로 분할하여 다른 형태의 격자를 생성하였다. 해석 결과 두 경우 다 최종적으로는 목표로 하는 속도로 피스톤이 복귀하는 결과를 보였으나, 최종 속도에 도달하는 과정에서 다른 차이를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.296-301
• /
• 2005

This paper describes the kinematics, dynamics and control of a 6-DOF shaking table with a bell crank structure, which converts the direction of reciprocating movements. In this shaking table, the bell crank mechanism is used to reduce the amount of space needed to install the shaking table and create horizontal displacement of the platform. In kinematics, joint design is performed using $Gr{\ddot{u}}bler's$ formula. The inverse kinematics of the shaking table is discussed. The derivation of the Jacobian matrix is presented to evaluate singularity conditions. Considering the maximum stroke of the hydraulic actuator, collision between links and singularity, workspace is computed. In dynamics, computations are based on the Newton-Euler formulation. To derive parallel algorithms, each of the contact forces is decomposed into one acting in the direction of the leg and the other acting in the plane orthogonal to the direction of the leg. Applying the Newton-Euler approach, the solution of inverse dynamics is almost completely parallel. Only one of the steps-the application of the Newton-Euler equations to the platform-must be performed on one single processor. Finally, the efficient control scheme is proposed for the tracking control of the motion platform.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.475-483
• /
• 2015

We propose a numerical scheme to simulate the time-domain echo signals at tracking radar for a realistic scenario where an EAD (expendable active decoy) and an airborne target are both in dynamic states. On various scenarios where the target takes different maneuvers, the trajectories of the EAD ejected from the target are accurately calculated by solving 6-DOF (Degree-of-Freedom) equations of the motion for the EAD. At each sampling time of the echo signal, the locations of the EAD and the target are assumed to be fixed. Thus, the echo power from the EAD can be simply calculated by using the Friis transmission formula. The returned power from the target can be computed based on the pre-calculated scattering matrix of the target. In this paper, an IPO (iterative physical optics) method is used to construct the scattering matrix database of the target. The sinc function-interpolation formulation (sampling theorem) is applied to compute the scattering at any incidence angle from the database. A simulator is developed based on the proposed scheme to estimate the echo signals, which can consider the movement of the airborne target and EAD, also the scattering of the target and the RF specifications of the EAD. For applications, we consider the detection probability of the target in the presence of the EAD based on Monte Carlo simulation.

• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.