• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.317-325
• /
• 2012

The Varian PORTALVISION (Varian Medical Systems, US) shows significant overresponses as the off-center distance increases compared to the predicted dose. In order to correct the dose discrepancy, the off-axis correction is applied to VARIAN iX linear accelerators. The portal dose for $38{\times}28cm^2$ open field is acquired for 6 MV, 15 MV photon beams and also are predicted by PDIP algorithm under the same condition of the portal dose acquisition. The off-axis correction is applied by modifying the $40{\times}40cm^2$ diagonal beam profile data which is used for the beam profile calibration. The ratios between predicted dose and measured dose is modeled as a function of off-axis distance with the $4^{th}$ polynomial and is applied to the $40{\times}40cm^2$ diagonal beam profile data as the weight to correct measured dose by EPID detector. The discrepancy between measured dose and predicted dose is reduced from $4.17{\pm}2.76$ CU to $0.18{\pm}0.8$ CU for 6 MV photon beam and from $3.23{\pm}2.59$ CU to $0.04{\pm}0.85$ CU for 15 MV photon beam. The passing rate of gamma analysis for the pyramid fluence patten with the 4%, 4 mm criteria is improved from 98.7% to 99.1% for 6 MV photon beam, from 99.8% to 99.9% for 15 MV photon beam. IMRT QA is also performed for randomly selected Head and Neck and Prostate IMRT plans after applying the off-axis correction. The gamma passing rare is improved by 3% on average, for Head and Neck cases: $94.7{\pm}3.2%$ to $98.2{\pm}1.4%$, for Prostate cases: $95.5{\pm}2.6%$, $98.4{\pm}1.8%$. The gamma analysis criteria is 3%, 3 mm with 10% threshold. It is considered that the off-axis correction might be an effective and easily adaptable means for correcting the discrepancy between measured dose and predicted dose for IMRT QA using EPID in clinic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.306-306
• /
• 2012

사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소재 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위하여 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서($00{\cdot}1$), ($11{\cdot}0$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 컨트롤해야한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이 결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 본 연구에서는 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 그리고 이러한 측정방법의 장점을 이용하여 ASTM의 측정법과 면방위 측정 결과를 비교 분석 하였다. 150 mm 사파이어 웨이퍼를 ASTM의 방법으로 면방위를 측정하였을 때 고분해능 장비에서 회전축 ${\Phi}$의 기준을 다르게 설정함에 따라서 수직/수평 면방위 측정결과가 많은 차이를 보였다. 그러나 본 연구에서 사용한 측정법에서는 이러한 수직/수평 면방위의 값들이 거의 변화하지 않고 일정하게 나타나는 것을 확인 하였으며, 측정한150 mm 사파이어 웨이퍼의 표면방위각은 $0.21^{\circ}$이고 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $1.2^{\circ}$벗어나 있는 방향이었다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2012

Estimating algorithm of physical activity energy expenditure was implemented by using a tri-axial accelerometer motion detector of the SVM(Signal Vector Magnitude) of 3-axis(x, y, z). A total of 33 participants(15 males and 18 females) that performed walking and running on treadmill at 2 ~ 11 km/h speeds(each stage increase 1km/h). Algorithm for energy expenditure of physical activities were implemented with $VO_2$ consumption and SVM correlation between the data. Algorithm consists of three kinds and hip, wrist, waist and hip can be used to apply.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.6
• /
• pp.462-472
• /
• 2004

In this paper a method for compensating for thp performance degradation or automatic speech recognition (ASR) is proposed. which is mainly caused by speaking rate variation. Before the new method is proposed. quantitative analysis of the performance of an HMM-based ASR system according to speaking rate is first performed. From this analysis, significant performance degradation was often observed in the rapidly speaking speech signals. A quantitative measure is then introduced, which is able to represent speaking rate. Time scale modification (TSM) is employed to compensate the speaking rate difference between input speech signals and training speech signals. Finally, a method for compensating the performance degradation caused by speaking rate variation is proposed, in which TSM is selectively employed according to speaking rate. By the results from the ASR experiments devised for the 10-digits mobile phone number, it is confirmed that the error rate was reduced by 15.5% when the proposed method is applied to the high speaking rate speech signals.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.587-596
• /
• 2009

The fiber bridging model is the crucial factor to predict or analyze the tensile behavior of fiber reinforced cementitious composites. This paper presents the fiber bridging constitutive law considering the distribution of fiber inclined angle and the number of fibers in engineered cementitious composites. The distribution of fiber inclined angle and the number of fibers are measured and analyzed by the image processing technique. The fiber distribution are considerably different from those obtained by assuming two- or three-dimensional random distributions for the fiber inclined angle. The simulation of the uniaxial tension behavior was performed considering the distribution of fiber inclined angle and number of fibers measured by the sectional image analysis. The simulation results exhibit multiple cracking and strain hardening behavior that correspond well with test results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.49-49
• /
• 2007

Glass infiltration 방법을 이용하여 '$A_2O_3$/Glass/$Al_2O_3$' 구조의 무수축 LTCC 기판을 제조하였다. Glass infiltration 법에 의한 무수축 기판 제조에 있어 가장 중요한 요소로는 Glass의 점성은 낮고, alumina에 대한 Glass의 젖음성 (wettability)이 좋으며. 낮은 반응성이 요구되기 때문에 Glass의 조성 선정이 무엇보다 중요하다. 본 연구에서는 Na, Pb, Mg 계열의 각기 다른 glass들의 alumina에 대한 젖음성을 평가하여 젖음성 및 치밀성이 우수한 Pb 계열의 Glass를 이용하여 LTCC 기판으로 적용 가능한 온도인 $700{\sim}900^{\circ}C$에서 '$A_2O_3$/Glass/$Al_2O_3$'구조의 glass infiltration 특성을 고찰하였다. 소성 후 수축율은 x-y축 0.2%, Z축 40%, 밑도 $3.8g/cm^3$, 유전율 6.8, 품질계수 552로 무수축 기판으로서의 적용 가능성을 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.201-210
• /
• 2007

Double-angle connections should be designed with enough stiffness and strength to properly resist various applied loads. Therefore, structural engineers should be able to predict some influential variables and take their effects into account in design. This study was performed to establish the effects of the number of bolts and bolt gage distance on the stiffness and strength of a double-angle connection under tension. Six experimental tests were conducted to describe the effects of these variables by comparing load-displacement relationship curves. In addition, two prediction models were proposed to estimate the initial stiffness and the maximum allowable tensile load based on the results of experimental tests. In the development of these prediction models, the effect of prying action was considered.

• Journal of The Korean Association For Science Education
• /
• v.31 no.8
• /
• pp.1121-1144
• /
• 2011

This research is an investigation of difficulties encountered by authors of 5th and 6th grade science textbooks. The aim is to assist authors in creating more easily understandable textbooks in the future. In-depth interviews were conducted with 6 teachers who have previously taken part in the development of 5th and 6th grade texts. The responses given during these interviews were analyzed using open, axial, and selective coding as suggested by Strauss and Corbin (1998). The results are as follows: In open coding, related concepts were extracted and classified into 15 main categories and 46 sub-categories. In axial coding, the main categories were arranged into causal conditions, main phenomenon, context, intervening conditions, action and interactional strategies, and consequences wherein they were consistently related to each other based on Grounded theory. Finally, in selective coding, core categories were instilled whereby the texts being developed were categorized into conservative, progressive, and innovative to allow for easier interpretation. This was done to improve the overall quality of Science textbooks.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.27-36
• /
• 2007

This paper describes the development of 6-axis ankle force/moment sensor for the intelligent feet of a humanoid robot. When the robot walks on uneven terrain, the feet should perceive the applied forces Fx, Fy, Fz and moments Mx, My, Mz from the attached 6-axis force/moment sensor on their ankles. Papers have already been published have some disadvantages in the size of the sensor, the rated output and so on. The rated output of each component sensor (6-axis ankle force/moment sensor) is very important to design the 6-axis force/moment sensor for precision measurement. Therefore, each sensor should be designed to get the similar rated output under each rated load. Also, the size of the sensor is very important for mounting to robot's feet. Therefore, the diameter should be below 100 mm and the height should be below 40mm. In this paper, first, the structure of a 6-axis ankle force/moment sensor was modeled for a humanoid robot's feet newly, Second, the equations to predict the strains on the sensing elements was derived, third, the size of the sensing elements was designed by using the equations, then, the sensor was fabricated by attaching straingages on the sensing elements, finally, the characteristic test of the developed sensor was carried out. The rated outputs from the derived equations agree well with the results from the experiments. The interference error of the sensor is less than 2.94%.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.116-127
• /
• 1990

The fission gas release model used In the SPEAR-BETA fuel performance code was modified by use of effective thermal conductivity for cracked fuel and by laking Into account axial fission-gas mixing between the fuel-clad gap and the plenum. With use of this modified model the fission gas release was analyzed under various power ramping conditions of P$_{max}$ and $\Delta$.fP. Effective fuel thermal conductivity that accounts for the effect of fuel tracking was used in calculation of the fuel temperature distribution and the Internal gas pressure under power ramping conditions. Mixing and dilution effects due to axial gas flow were also considered in computing the width and the thermal conductivity of the gap. The effect of axial gas flow w3s solved by the Crank-Nicholson method. The finite difference method was used to save running time in the calculation. The present modified fission-gas release model was validated by comparing its predicted results with experimental data from various lamping tests In the literature and calculated results with use of the models used In the SPEAR-BETA and FEMAXI-IV codes. Results obtained with use of the present modified model showed better agreement with experimental data reported in the literature than those results with use of the latter codes. The fuel centerline temperature calculated with introduction of effective thermal conductivity for centerline temperature calculated with Introduction of effective thermal conductivity for cracked fuel was 200 higher fission gas release predicted with use of the modified model was nearly 6% larger on the average than that calculated by use of the unmodified model used in the SPEAR-BETA code.e SPEAR-BETA code.e.