• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.128-137
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger by using the parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. 0247164, offered by Korean Intellectual property Office). The trial manufactures were made from Aloo-heat which was 600mm, 700mm length respectively, and It were welded to the end "U" type in order to direct flow of the underground water. The performance test was carried out under the condition of open space and room temperature with the change of flow rate of the underground water and air. The results are as follows. 1. The trial manufactures had convection heat value from 33 to 156 W/m²℃, and It was coincided with design assumption. 2. The amount of energy transfer was increased with the increment of the area of heat transfer, the air flow, the gap of temperature inlet & outlet the underground water and the air. 3. The heat value was 6,825W when the air flow was 6,000m³/h and the gap of temperature between inlet and outlet of the underground water was 6℃, and It dropped from 25.8℃ to 23.2℃(-2.6℃ difference). The convection heat value was 88.5W/m²℃. 4. The heat value was 2.625W when the air flow was 4,000m³/h and the gap of temperature between inlet and outlet the underground water was 2℃, and It dropped from 27℃ to 22.5℃(-4.5℃ difference). The convection heat value was 33.6W/m²℃. 5. Correlation values(R²) of the testing heat values of the trial manufacture type I, II, and III were 0.9141, 0.8935, and 0.9323 respectively, and correlation values(R²) of the amount of the air flow 6,000m³/h, 5,000m³/h, 4,000m³/h were 0.9513, 0.9414, and 0.9003 respectively.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.81-88
• /
• 2015

To characterize the culture medium for the biosurfactant production by Bacillus pumilus IJ-1, the influences of various carbon, nitrogen and mineral sources were assessed. As a result, the highest biosurfactant production was observed after 96 h cultivation containing 0.5% (w/v) tryptone. The strain was able to grow and produce biosurfactant at 0-10% (w/v) NaCl, in the pH range of 5-10, and at $20-45^{\circ}C$. Optimal culture conditions for the biosurfactant production were at $20^{\circ}C$ and pH 9.0 after 72 h incubation and the surface tension of biosurfactant was 27.0 dyne/cm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.42-49
• /
• 1996

The author examined the response of Armorclad rockfish, Sebastes hubbsi [MATSUBARA]to the surface attracting lamps (0.5W, 0.8W, 1W) line in the experimental water tank ($550L{\times}58W{\times}73H$cm). The attraction rate was investigated in accordance with the intervals of lighting and putting out hour (1,5 minute) when each of the attraction lamps was gradually switched off after they were switched on all at once. The results are as follows : 1. Total distribution rate of fish in the illuminated section was 61.6%(mean 12.3%) in case of 1 minute interval, and 41.0%(mean 8.2%) in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section : \circled1Distribution rate at interval of 1 minute were 12.7% in 0.8W, 12.4% in 0.5W and 11.9% in 1 W respectively. \circled2Distribution rate at interval of 5 minutes were 9.0% in 1W, 8.6% in 0.8W and 7.0% in 0.5W respectively. 3. Attraction rates of the last section showed a little increasing as illuminating time elapsed. A difference of attraction rates according to lighting source in 1 minute interval was bigger than that in 5 minute interval. 4. Attraction rate of fish in only last section switched on : \circled1Attraction rate at interval in case of 1 minute were 52.0% in 0.8W, 46.7% in 0.5%W and 45.3% in 1W respectively. \circled2Attraction rate at interval in case of 5 minutes were 32.0% in 1W, 24.0% in 0.8W and 14.7% in 0.5W respectively.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.243-251
• /
• 1992

The author examined the response of File fish, Stephanolepis Cirrhifer (TEMMINCK et SCHLEGEL) to the surface attracting lamps(0.5W, 0.8W, 1W) line in the experimental water tank (550L$\times$58W$\times$73H cm). the attracting rate was investigated in accordance with the interval of lighting and putting out hour (1, 5 minute)when each of the attracting lamps was gradually switched off after they were switched on all at once. The results are as follows: 1. Total distribution rate of fish in the illuminated section was 96.9%(mean 19.4%) in case of 1 minute interval, and 98.4%(mean 19.7%) in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rate at interval of 1 minute were 19.9% in 0.8W, 19.3% in 1W and 18.9% in 0.5W respectively. \circled2 Distribution rate at interval of 5 minutes were 19.8% in 1W, 19.8% in 0.8W, and 19.5% in 0.5W respectively. 3. Attracting rate of the last section showed increasing as illuminating time elapse without interval and lighting source. 4. Attracting rate of fish in only last section switched on: \circled1 Attracting rate at interval in case of 1 minute were 98.0% in 1W, 97.0% in 0.5W and 83.0% in 0.8W respectively. \circled2 Attracting rate at interval in case of 5 minutes were 99.3% in 1W, 97.3% in 0.5W and 93.3% in 0.8W respectively.

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.141-144
• /
• 2001

From the reaction of Na[Ga(N₃)₄] with PPh₃, an ionic compound [Ph₃P(OH)]/sup +/[N₃]/sup -/ (1) was isolated. Compound 1 was characterized by spectroscopy (¹H-NMR, /sup 13C{¹H}-NMR, and IR) and X-ray diffraction. Crystallographic data for 1 : orthorhombic space group P2₁2₁2₁, a = 10.491 (4) Å, b=11.603(5)Å, c=13.149(5)Å, Z=4, R(wR₂)=0.0547(0.0978).

• The Journal of Natural Sciences
• /
• v.5 no.2
• /
• pp.75-80
• /
• 1992

The objective of this study is to investigate the effect of dispersion of silicon nitride powder with 5wt% $A1_2$$O_3$ and 5wt% $Y_2$$O_3$ on the microstructure of a sintered body. $Si_3$$N_4$ powder was dispered in a distilled water with varing pH.Zeta potential was measured and the dispersion states were directly observed by SEM. Green bodies were obtained by slip-casting and fired at $1750^{\circ}C$ for 1 hr. Microstructures of fired specimens were observed by SEM. The result were that the specimen prepared from the dispersions with pH 5 and 10 showed the best densification.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.646-651
• /
• 2000

The photocatalytic degradation of Mordant Yellow-12 (MY-12) was investigated using a UV-Visible Spectrophotometer and pH meter. The UV-Visible absorbance spectra of the MY-12 contaminated water before and after treatment were presented in figure. The decrease of absorbance occurs at the range of 250 and 450 nm, this result suggests that photocatalytic degradation involves destruction of the aromatic rings in this experiment. More than 32% of the MY-12 was decomposed after one hour in 26-W fluorescent lamp, whereas it was 17% and 24% respectively in 15-W and 21-W lamps. MY-12 was decomposed completely after three hours in 26-W fluorescent lamp. The destruction rate constants were calculated from the change of absorbance and pH.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.829-835
• /
• 2010

This paper presents a disposable power generator for microfluidic devices; the power generator has a tubular PEMFC and a $H_2$ generator. The tubular PEMFC has a tubular MEA (diameter: 1.52 mm) that is supported by a spiral wire electrode. The $H_2$ generator supplied $H_2$ to the tubular PEMFC; $H_2$ was generated via the reaction of Al foil (27 mg) and 5 M NaOH (0.12 ml). The open circuit voltage and power density of a unit cell of the tubular PEMFC were 0.81 V and $16.4\;mW/cm^2$ (0.35 V), respectively. The $H_2$ generator generated 11.6 ml $H_2$ for 15min. The power generator was continuously operated for 15 min at 0.64 mW (0.71 V) and for 10 min at 1.06 mW (0.46 V). We experimentally verified that it is feasible to use the proposed power generator as a power source for microfluidic devices; in the experiment, an LED (2.5 mW; 1.8 V) was lit for 10 min by using three serially connected TPEMFCs and one $H_2$ generator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.28-29
• /
• 2006

The magnetic properties of a series of both annealed and as-rolled Ni-$W_y$ alloy tapes with compositions y = 0, 1, 3, and 5 at.%, were studied. To compare with Ni-W alloys, the magnetic properties of a series of both annealed and as-rolled $[Ni_{97at.%}W_{3at.%}]_{100-x}Cu_x$ alloy tapes with compositions x = 0, 1, 3, 5 and 7 at.%, were studied, as well. Both the isothermal mass magnetization M(H) of a series of samples, such as both Ni-W and [Ni-W]-Cu alloy tapes, at different fixed temperatures and M(T) in fixed field, were measured using a PPMS-9 (Quantum Design). The degree of ferromagnetism of Ni-$W_y$ alloys have reduced as W-content y increases. Both the saturation magnetization $M_{sat}$ and Curie temperature $T_c$ decrease linearly with W-content y, and both $M_{sat}$ and $T_c$ go to zero at critical concentration of $y_c$ ~ 9.50 at.% W. The effect of Cu addition on both the saturation magnetization $M_sat$ and Curie temperature $T_c$ decrease linearly with Cu-content x in $[Ni_{97at.%}W_{3at.%}]_{100-x}Cu_x$ alloy tapes with compositions x = 0, 1, 3, 5, and 7 at.%. The results confirm that [Ni-W]-Cu alloy tapes can have much reduced ferromagnetism as Cu-content x increases.