• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.257-264
• /
• 1995

We designed the cutter profile for symmetric screw rotor and did vibration experiment of screw rotor manufactured by the designed cutter profile. The results of this study are summarized as follows. (1) We designed the cutter profile of screw rotor (4-6)(5-6) by using numerical analysis program. (2) The maximum amplitude and variation of amplitude of 5-6 profile rotor are about 30 - 36.7% and 10 - 25% smaller than those of 4-6 profile rotor, respectively. (3) As the angular velocity of rotor changes from 100 to 300 rpm, the vibration of X, Y axis in driving shaft of 5-6 profile rotor is about 10 - 20% smaller than that of 4-6 profile rotor.

• Korean Journal of Veterinary Service
• /
• v.29 no.1
• /
• pp.37-46
• /
• 2006

The present study was conducted to investigate serologic characteristics, antimicrobial resistance and plasmid profile of 79 E. coli isolated from faecal sample of the wild bird in Busan province (Gangseo, Saha) during the period from November 2004 to February 2005. Many strains were positive for rafiinose (63.3%), sorbitol (96.2%), sucrose (73.4%) and few strains were positive for esculin, arginine dihydrolase, ornithine decarboxylase. Among 79 isolates, O serotypes were O55, O158, O18 and 47 strains (59.5%) were resistant to antimicrobial drugs such as tetracycline (40.5%), carbenicillin (27.8%). 15 strains showed 14 different plasmid bands composed of 1 to 6 bands. They were ranged from 1.6 to 43 kb and harbored 43 kb (11.4%), 5.3 kb (6.3%) and 11.4 kb (5.1%). Plasmid profile of 15 strains were 43 profile (2.5%), 2.4, 43 profile (2.5%) and 5.3, 11.4, 43 profile (2.5%).

• Journal of Nutrition and Health
• /
• v.29 no.8
• /
• pp.881-888
• /
• 1996

The purpose of this study was to determine whether vitamin B6(B6) deficiency affects fuel utilization and blood cholesterol profile with exercise-training. Twenty-four rats were fed a B6 deficient(-B6) diet or a control (+B6) diet for 5 weeks and either exercised(EX) or nonexercised (NE). EX rats were exercised on treadmill(10$^{\circ}$, 0.5-0.8km/h) for 20 minutes everyday. Glucose(GLU), glycogen (GLY), protein(PRO), trglyceride(TG), free fatty acid(FFA), total cholesterl(TC), HDL-cholesterol(HDL-C) and LDL-choleterol(LDL-C) were compared in plasma(P), liver(L) and skeletal muscle(M) of rats. There was a vitamin effect on the level of P-GLU, P-TG, M-TG, L-GLY, L-PRO and an exercise effect on the level of P-PRO, P-FFA, M-PRO, L-GLY, L-TG, P-TC, P-HDL-C, P-LDL-C. Compared to +B6 rats were lower and there were no differences in P-GLU, P-FFA, P-TG. M-GLY, L-TG, P-TC and P-HDL-C. In EX group, the level of P-TG was higher and M-PRO was lower in -B6 rats. There were no differences in M-GLY, L-TG, P-TC and P-HDL-C. These results suggest that a lowered intake of vitamin B6 may impair the adaptation of animals to fuel metabolism related to a decrease of fatty acid oxidation and attenuates the exercise-traning effect on blood lipid profile.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.119-138
• /
• 1998

Recently measurements of atmospheric trace gases from satellite are vigorous. So the development of its data processing algorithm is important. In this study, retrievalof vertical ozone profile from the atmospheric transmittance measured by satellite solar occultation method and its sensitivity to temperature and pressure are investigated. The measured transmittance from satellite is assumed to be given by the limb path transmittance simulated using annual averaged Umkehr data for Seoul. The limb path transmittance between wavelengths $9.89{\mu}m$ and $10.2{\mu}m$ is simulated with respect to tangent heights using the ozone data of HALOE SIDS(Hallogen Occultation Experiment Simulated Instrument Data Set) as an initial profile. Other input data such as pressure and temperature are also from HALOE SIDS. Vertical ozone profile is correctly retrieved from the measured transmittance by onion-peeling method from 50km to 11km tangent heights with the vertical resolution of 3km. The bias error of $\pm0.001$ in measured transmittance, the forced error of $\pm3K$ in each layer temperature, and the forced $\pm3%$ error in each layer pressure are assumed for sensitivity tests. These errors are based on the ADEOS/ILAS error limitation. The error in ozone amount ranges from -6.5% to +6.9% due to transmittance error, from -9.5% to +10.5% due to temperature error, and from -5.1% to +5.4% due to pressure error, respectively. The present study suggests that accurate vertical ozone profile can be retrieved from satellite solar occultation method. Accuracy of vertical temperature profile is especially important in the retrieval of vertical ozone profile.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4139-4145
• /
• 2012

This paper shows an antireflection coating design skill for utilization the thin-film silicon solar cell in the future. The reflectivity of each index profile previously suggested as linear, cubic and quintic function has been calculated and compared. Each index profile is applied to the antireflection coating consisting of 6 layers with 180nm thickness. Also we suggest the graded index profile and compare it's reflectivity to the linear, cubic and quintic's ones. As a results we find the reflectivity generally decreases as the order goes to higher. However the reflectivity in the graded index profile shows the higher(lower) value than ones in the linear, cubic and quintic especially in the shorter(longer) wavelength range from 500 nm to below 700 nm(above 700 nm to 800 nm). Therefore we find that the graded index profile structure could be applied for the better antireflection coating design scheme especially for optical device and optical filter in the range of from deep red to infrared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.565-570
• /
• 2017

The various techniques proposed previously to obtain a good antireflection(AR) coating induce a scattering of incident light by nanoparticles or control the refractive index by using different materials. This paper compares a suggested graded index profile with the quintic index profile previously suggested for producing an index profile that gives good performance from an AR coating. We assume the structure of the AR coating has three, six, and nine layers with 180 nm total thickness. The wavelength of incident light ranges from 300 nm to 1100 nm. We use the transfer matrix theory for a single layer to obtain the reflectivity of three, six, and nine layers. The reflectivity of two different index profiles with three, six, and nine layers is compared. As a result, the suggested graded index profile shows lower reflectivity than the quintic index profile with three layers, especially in the wavelength range from about 600 nm to 1100 nm. Therefore, we expect that these results can be applied to optical devices and filters in the range from visible(red) to near infrared.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.504-508
• /
• 2003

We present a new point-diffraction interferometer, which has been devised for the three-dimensional profile measurement of light scattering rough surfaces. The interferometer system has multiple sources of two-point-diffraction and a CCD camera composed of an array of two-dimensional photodetectors. Each diffraction source is an independent two-point-diffraction interferometer made of a pair of single-mode optical fibers, which are housed in a ceramic ferrule to emit two spherical wave fronts by means of diffraction at their free ends. The two spherical wave fronts then interfere with each other and subsequently generate a unique fringe pattern on the test surface. A He-Ne source provides coherent light to the two fibers through a 2${\times}$l optical coupler, and one of the fibers is elongated by use of a piezoelectric tube to produce phase shifting. The xyz coordinates of the target surface are determined by fitting the measured phase data into a global model of multilateration. Measurement has been performed for the warpage inspection of chip scale packages (CSPs) that are tape-mounted on ball grid arrays (BGAs) and backside profile of a silicon wafer in the middle of integrated-circuit fabrication process. When a diagonal profile is measured across the wafer, the maximum discrepancy turns out to be 5.6 ${\mu}{\textrm}{m}$ with a standard deviation of 1.5 ${\mu}{\textrm}{m}$.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1091-1098
• /
• 1999

Antimicrobial susceptibility, plasmid profiles and distribution of toxA gene were investigated in Pasteurella multocida isolated from pneumonic lung lesions of swine. The bacteria were highly susceptible to norfloxacin, cabenicillin, enrofloxacin and chloramphenicol, but resistant to colistin, sulfamethoxawle/trimethoprime, bacitracin, streptomycin. Sixty percentage of the isolates was resistant more than 2 drugs used in this experiment and 21 strains (23.6%) were resistant more than 5 drugs. This phenomenon meant that they had highly multi-drugs resistance. In the analysis of plasmid profiles, nineteen strains (47.5%) of 40 P multocida isolates harbored plasmids, ranging from 53.3kb to 2.49kb in size and the plasmid profiles could be classified into 5 groups. However, there was no relationship between the size and the profile of plasmid and the resistance pattern of antimicrobial agents. Thirty strains of 39 P multocida isolates (77%) investigated by PCR harbored toxA gene. This result suggested involvement of the ToxA protein expressed from the gene in pneumonic pasteurellosis of swine.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.296-296
• /
• 2012

LCD panel 검사를 위한 Probe unit은 대형 TV 및 모바일용 스마트폰을 중심으로 각광을 받고 있는 소모성 부품으로 최근 pitch의 미세패턴화가 급속히 진행되고 있다. 본 연구에서는 Slit Wafer 제작 공정을 최적화하기 위해 25 um pitch의 마스크를 설계, 제작하였다. 단공과 장공을 staggered 형태로 배열하여 25 um/25 um line/space pitch로 설계하였다. 또한 단위실험을 위해 직접 25 um pitch로 설계하여, 동일한 실험조건을 적용하여 최적 조건을 찾고자 하였다. 반응변수는 Etch rate 및 profile angle로 결정하였으며, 약 200~400 um 에칭된 slit의 상단과 하단의 폭, 그리고 식각깊이를 SEM 측정사진을 통해 정한 후 etch rate 및 profile angle을 결정하였다. 인자는 식각속도 및 wall의 각도를 결정하는 식각 및 passivation 가스의 유량, chamber 압력(etching/passivation), 식각시간 등으로 정하였으며, 이들의 최대값과 최소값 2 수준으로 실험계획을 설계하였다. 식각 조건에 따라 8회의 실험을 수행하였다. 가스의 유량은 SF6 400 sccm, C4F8 400 sccm, 식각 싸이클 시간은 5.2~10.4 sec, passivation 싸이클시간 4 sec로 하였으며, 압력은 식각시 7.5 Pa, passivation 시 10 Pa로 할 경우가 가장 sharp하게 나타났다. Coil power 와 platen power는 각각 2.6 KW, 0.14 KW로 하였으며, 최적화를 위한 인자의 값들은 이 범위에서 조절하였다. 이러한 인자의 조건 조절을 통해 etch rate는 5.6 um/min~6.4 um/min, $88.9{\sim}89.1^{\circ}$의 profile angle을 얻을 수 있었다.

• Nutritional Sciences
• /
• v.9 no.2
• /
• pp.92-96
• /
• 2006

Studies were carried out to determine the effect of feeding diet containing 5% canola oil on growth, feed efficiency, and fatty acid profile of bacon in finishing pigs and of longissimus muscle in horses fattening for meat production. In experiment 1, twenty cross-bred barrows and twenty cross-bred gilts (average weight, 80 kg) were blocked by sex and weight, and five barrows or five gilts were allotted to one of eight pens $(6.25m^2/pen)$, respectively. Four pens (two with barrows and two with gilts) randomly selected were assigned to a control diet containing 5% tallow and the remaining four pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency over a 6-wk feeding period were not different (p>0.05) between the two diets, nor was backfat thickness. Fatty acid profile in bacon fat showed that the 0-3 fatty acid ($\alpha-linolenic$ acid) content in pigs fed diet containing 5% canola oil was approximately three times (P<0.01) as much as in pigs fed tallow. In experiment 2, thirty-two Jeju horses (average $weight{\pm}SE,\;244{\pm}5kg$) were blocked by sex and weight, and two horses of the same sex and similar body weight were allotted to one $(15m^2/pen)$ of eight pens. Eight pens (four with males and four with females) selected randomly were assigned to a control diet containing 5% tallow and the remaining eight pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency for concentrates without roughages over a 5-month feeding period were not different (P>0.05) between the two diet groups. Fatty acid profile in the muscle fat showed that the 0-3 fatty acid (a-linolenic acid) content in horses fed diet containing 5% canola oil was approximately two times (P<0.01) that in horses fed tallow. The increased (P<0.01) 0-3 fatty acid content in pigs and horses fed canola oil decreased the ratio of n-6 to n-3 fatty acids compared to the control, indicating a significant improvement in pork and horsemeat fatty acid profile for health benefit. Our study demonstrated that feeding diet containing 5% canola oil may help produce pork and horsemeat with more health benefit, increasing their $\alpha-linolenic$ acid content without deleterious effects on growth of pigs and horses.