• Macromolecular Research
• /
• v.17 no.2
• /
• pp.99-103
• /
• 2009

We evaluated the efficacy of pH-sensitive micelles, formed by methoxy poly(ethylene glycol)-b-poly($\beta$)-amino ester) (PEG-PAE), as carriers for paclitaxel (PIX), a drug currently used to treat various cancers. PTX was successful encapsulated by a film hydration method. Micelles encapsulated more than 70% of the PTX and the size of the PTX-encapsulated micelles (PTX-PM) was less than 150 nm. In vitro experiments indicated that the micelles were unstable below pH 6.5. After encapsulation of PTX within the micelles, dynamic light scattering (DLS) studies indicated that low pH had a similar demicellization effect. An in vitro release study indicated that PTX was slowly released at pH 7.4 (normal body conditions) but rapidly released under weakly acidic conditions (pH 6.0). We demonstrated the safety of micelles from in vitro cytotoxicity tests on HeLa cells and the in vivo anti-tumor activity of PTX-PM in B16F 10 tumor-bearing mice. We concluded that these pH-sensitive micelles have potential as carriers for anti-cancer drugs.

• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.1-13
• /
• 2015

The modification of ultrafiltration membranes with carbon nanotube (CNT) buckypaper on fouling control was investigated. Two types of commercially available flat-sheet membranes were used: PS35 and PES900C/D (PES) (the PS35 membranes were hydrophilic with a molecular weight cutoff of 20 kDa, and the PES membranes were hydrophobic with a molecular weight cutoff of 20 kDa). The CNT buckypaper modified ultrafiltration membranes were prepared by filtering a CNT suspension through the flat-sheet membrane in a dead-end ultrafiltration unit. After modification, the pure water flux of PES was significantly increased, while the pure water flux of PS35 was decreased. The properties of the CNT modified membranes were also investigated. Considering the antifouling properties, pure water flux of the modified membrane, and the stability of CNT buckypaper layer on the membrane surface, ethanol solution with a concentration of 50 wt.%, multi-walled carbon nanotubes (MWCNTs) with a larger diameter (30-50 nm), and the CNT loading with $7.5g/m^2$ was selected. The CNT buckypaper on the surface of ultrafiltration membranes can trap the pollutants in sewage effluent and prevent them reaching the surface of virgin membranes. Water quality analysis showed that the effluent quality of the modified membrane was obviously improved. The removal efficiency of humic acid and protein-like matters by the modified membrane was significant. These results indicate the potential application of the CNT buckypaper layer modified membranes in the field of wastewater reclaim.

• YAKHAK HOEJI
• /
• v.54 no.2
• /
• pp.106-111
• /
• 2010

The chemical structures of eight compounds purified from two plants (Polygala tenuifolia Willdenow and Dioscorea batatas Decene) were determined and their anti-microbial activity against three microbial strains (Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans) was tested. The three micro organisms were cultured in 96-well plates or Petri dishes without (control) or with the eight compounds added at concentrations of 100 to 0.01 ${\mu}M$ (wt/vol). The growth of the microorganisms in the medium was examined after a 24-h incubation. The inhibitory effect of each compound on the growth of the microorganisms was calculated from the optical density measured at 595 nm, turbidity, and size of the inhibition zone around the treated paper disc. The minimum inhiitory concentration (MIC) of compounds 4 to 7 against S. aureus was 0.08, 0.05, 1.3 and 0.02 ${\mu}M$, respectively, and 0.09, 0.1, 0.2 and 100 ${\mu}M$ against C. albicans. The $IC_{50}$ (50% inhibition) values of compounds 5 and 6 were 3.1 and 6.4 ${\mu}M$ against S. aureus, respectively, and 10 and 2.4 ${\mu}M$ against C. albicans. Therefore, compounds 4 to 6 were the most potent anti-microbial agents among the eight compounds tested.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.490-496
• /
• 2015

We have grown AlN/GaN heterostructure which is a promising candidate for mm-wave applications. For the growth of the high quality very thin AlN barrier, indium was introduced as a surfactant at the growth temperature varied from 750 to $1070^{\circ}C$, which results in improving electrical properties of two-dimensional electron gas (2DEG). The heterostructure with barrier thickness of 7 nm grown at of $800^{\circ}C$ exhibited best Hall measurement results; such as sheet resistance of $215{\Omega}/{\Box}$electron mobility of $1430cm^2/V{\cdot}s$, and two-dimensional electron gas (2DEG) density of $2.04{\times}10^{13}/cm^2$. The high electron mobility transistor (HEMT) was fabricated on the grown heterostructure. The device with gate length of $0.2{\mu}m$ exhibited excellent DC and RF performances; such as maximum drain current of 937 mA/mm, maximum transconductance of 269 mS/mm, current gain cut-off frequency of 40 GHz, and maximum oscillation frequency of 80 GHz.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.732-737
• /
• 1990

In this study, the rutin contents in buckwheat and buckwheat foods were determined. Rutin in buckwheat and buckwheat foods was extracted with methanol and separated by High Performance Liquid Chromatography(HPLC) equipped with Lambda-Max Model 481 detector set at 355 nm using a ${\mu}$ Bondapak $C_{18}$ column and a 2.5% acetic acid:methanol:acetonitrile (35:5:10, v:v:v) solvent. There were differences in the rutin contents among the different species of buckwheat. The rutin contents in buckwheat groats were ranged from 8.84 mg to 24.77 mg/100g. The rutin contents in commercial buckwheat groats and flours were ranged from 15.04 mg to 20.92 mg/100g. The rutin contents in commercial dried buckwheat noodles, steamed buckwheat noodles, and buckwheat cookies were ranged from 1.76 mg to 10.84 mg/100g.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.893-905
• /
• 2020

This study is a study on solubilization and emulsifying power of tocopheryl acetate using vegetable surfactants. High purity polyglyceryl-10 isostearate and polyglyceryl-10 oleate were mixed to synthesize a vegetable surfactant with excellent solubilizing power and emulsifying power. The mixed raw material was named Solubil EWG-1100. The appearance of this raw material was a pale yellowish paste with a specific smell, specific gravity of 1.12, and acid value of 0.085. The HLB value of this surfactant was calculated by the Griffin's equation with an average value of 15.17. The behavior of this surfactant to solubilize tocopheryl acetate was mechanically verified. The performance of solubilization was evaluated by a method of visual evaluation and was measured by a transmittance rate at 650 nm using a UV spectrophotometer. As a result, in the formulation using 3% ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate was required about 5 times of natural surfactant. In the formulation without ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate required about 7 times of natural surfactant. In addition, the concentration of surfactant required to make an emulsifivation 10 % of tocopheryl acetate was 1 wt% of Solubil EWG-1100, and the emulsified particle size was 3.5 mm in cream formula. In order to obtain stable and fine emulsified particles, it was found that as the concentration of tocopheryl acetate increased, the concentration of Solubil EWG-1100 also was to increase. As a result of testing the solubilizing power of the surfactant according to the pH various change, it showed stable solubilizing power in the acidic region of pH=3.2, the neutral region of pH=7.0, and the alkaline region of pH=11.8. As application, based on these results, it is expected that it can be widely applied to the cosmetics field that develops skin care prescriptions, sensitive skin products, and heavy dry skin products.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.752-756
• /
• 2002

Green-emitting $Zn_2SiO_4:Mn$ phosphors for PDP(Plasma Display Panel) application were synthesized by colloidal seed-assisted spray pyrolysis process. The codoping with $Gd^{3+}/Li^+$, which replaces $Si^{4+}$ site in the willemite structure, was performed to improve the luminous properties of the $Zn_2SiO_4:Mn$ phosphors. The particles prepared by spray pyrolysis process using fumed silica colloidal solution had a spherical shape, small particle size, narrow size distribution, and non-aggregation characteristics. The $Gd^{3+}/Li^+$ codoping amount affected the luminous characteristics of $Zn_2SiO_4:Mn$ phosphors. The codoping with proper amounts of $Gd^{3+}/Li^+$ improved both the photoluminescence efficiency and decay time of $Zn_2SiO_4:Mn$ phosphor particles. In spray pyrolysis, the post-treatment temperature is another factor controlling the luminous performance of $Zn_2SiO_4:Mn$ phosphors. The $Zn_{1.9}SiO_4:Mn_{0.1}$ phosphor particles containing 0.1 mol% $Gd^{3+}/Li^+$ co-dopant had a 5% higher PL intensity than the commercial product and 5.7 ms decay time after post-treatment at $1,145^{\circ}C$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.146-152
• /
• 2011

Thermal stability of $Ge_2Sb_2Te_5$ (GST) and $SiO_2$ doped GST (SGST) films for phase change random access memory applications was investigated by observing the change of surface roughness, layer density and composition of both films after isothermal annealing. After both GST and SGST films were annealed at $325^{\circ}C$ for 20 min, root mean square (RMS) surface roughness of GST was increased from 1.9 to 35.9 nm but that of SGST was almost unchanged. Layer density of GST also steeply decreased from 72.48 to 68.98 $g/cm^2$ and composition was largely varied from Ge : Sb : Te = 22.3 : 22.1 : 55.6 to 24.2 : 22.7 : 53.1, while those of SGST were almost unchanged. It was confirmed that the addition of a small amount of $SiO_2$ into GST film restricted the deterioration of physical and chemical properties of GST film, resulting in the better thermal stability after isothermal annealing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.334-340
• /
• 1997

Electric and dielectric properties of the $SrTiO_3$films have been studied. The influence of impurities on $SrTiO_3$ films was evaluated to reduce the leakage current density. Acceptor doping, with a small concentration of Fe or Cr, has led to a substantial improvement to $10^{-9}$ order in the leakage current density. The experimental results can be explained by a model in which oxygen vacancies are the key defects responsible for the leakage current. The $SrTiO_3$ film 200 nm in thickness with 5 mol% excess SrO fabricated in $Ar/O_2$ at $550^{\circ}C$ obtained the lowest leakage current density $1.0 {\times} 1.0 A/\textrm{cm}^2$. The improved results can be introduced into the capacitor dielectric of giga bit DRAM memories.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.5
• /
• pp.299-304
• /
• 2006

The aim of this study was to investigate the effect of deformable liposomes with sodium cholate on the skin permeation and skin deposition of arbutin, a hydrophilic skin-whitening agent. Various compositions of liposomes were prepared by the extrusion method. Particle size distribution and entrapment efficiency were determined by the laser light scattering and the gel permeation chromatography, respectively. The in vitro rat skin permeation and deposition of arbutin in various skin layers were investigated using the Keshary-Chien diffusion cells at $37^{\circ}C$. The average particle size of the deformable liposomes ranged from 217.4 to 117.4 nm, depending on the composition. The entrapment efficiency was dependent on surfactant concentration and loading dose of arbutin. The permeation rate of 5% arbutin in deformable liposomes was $8.91({\pm}1.33){\mu}g/cm^2/h$, and was not significantly different from 5% arbutin aqueous solution $[9.82({\m}0.86){\mu}g/cm^2/h]$. The deposition of arbutin was $43.34({\pm}12.13)$ and $16.99({\pm}7.83){\mu}g/cm^2$ in stratum corneum layer and epidermis/dermis layer, respectively, after 12 h of permeation study. These results are consistent with several earlier studies for the localization effect of liposomal formulations in stratum corneum, and demonstrated the feasibility of the deformable liposomes as a promising carrier for the skin deposition of hydrophilic skin-whitening compounds.