• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1026-1032
• /
• 1996

The effects of steeping temperature $(7^{\circ},\;15^{\circ},\;20^{\circ}\;and\;30^{\circ}C)$ and steeping time $(2{\sim}14\;hr)$ on the physicochemical properties of milled rice (variety; Chucheongbyeo) were investigated. The pH of the steep water decreased as the steeping time increased, which was more pronounced at higher steeping temperature. The solid loss was about 4.0% during steeping. The contents of protein, fat and ash decreased during steeping, which was greater at elevated temperature. The lightness of rice was slightly increased, and the yellowness was decreased upon steeping. The water-binding capacity of rice was increased during steeping at above $15^{\circ}C$. The slight increase of the swelling power of rice at $80^{\circ}C$ was observed upon steeping. The maximum wavelengh for the rice flour-iodine complex was moved to a higher wavelengh, but X-ray diffraction patterns remained constant regardless the steeping conditions. The pasting properties of rice flour (10%) by amylograph indicated that the peak viscosity increased as the steeping time was increased at all steeping temperatures. The steeping resulted in the greater breakdown and the 1ower setback. The log peak viscosity showed a linear relationship with the steeping time. The activation energy and $Q_{10}$ value for the visciosity increase rate was 2, 320 cal/mole and 1.14, respectively.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.278-282
• /
• 2010

In this study, the antibacterial activity and component analysis of Persicaria perfoliata extracts were investigated. MIC (Minimum Inhibitory Concentration) values of ethyl acetate fraction from P. perfoliata on Escherichia coli, Propionibacterium acnes, and Staphylococcus aureus were 0.25%, equally. The results showed that the antibacterial activity of the ethyl acetate fraction was the highest in the S. aureus and P. acnes. Ethyl acetate fraction from P. perfoliata extracts showed 5 bands in TLC and 8 peaks in HPLC (320nm). In HPLC chromatogram of ethyl acetate fraction, first main peak 2 (24.99%) and peak 3 (22.65%) were identified as quercetin-3-o-glucuronide and isoquercitrin in the order of elution time. Also, in HPLC chromatogram of deglycosylated fraction, main peak 2 (76.93%) was identified as quercetin in the order of elution time. And these components are very effective as antioxidants. Thus, these results indicate that extract/fractions of P. perfoliata can be applicable to new functional cosmetics for antioxidant, antibacterial activity.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.59-64
• /
• 1996

The 7F0→5D0excitation spectra of Eu(Ⅲ) complexed with polyfunctional monocarboxylic acid(glycolic acid, glycine and thioglycolic acid) containing a terminal O, N and S neutral donors and propionic acid were investigated using Eu(Ⅲ) luminescence spectroscopy. In the excitation spectra of Eu(Ⅲ)-propionate system, the stepwise appearance of the peaks was observed at 579.0, 579.2 and 579.5 nm with increasing in the ligand-to-metal ratio, which correspond to the formation of Eu(propionate)2+, Eu(propionate)2+ and Eu(propionate)3 species. Three maximum peaks were also obtained for Eu(Ⅲ)-glycolate, Eu(Ⅲ)-glycinate and Eu(Ⅲ)-thioglycolate systems and were found to be quite similar to those of Eu(Ⅲ)-propionate system. The q values (number of coordinated water molecules of Eu(Ⅲ) ion) obtained from the luminescence decay constants of Eu(Ⅲ)-glycolate and Eu(Ⅲ)-thioglycolate were 7.0 and 7.1, and compare well with 7.3 for Eu(Ⅲ)-propionate: Each ligand units replace around two coordinated water molecules. These results show that the polyfunctional monocarboxylates behaves like the propionate for Eu(Ⅲ) ion coordination.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.7 s.337
• /
• pp.5-12
• /
• 2005

The device performance of nano-scale center-channel (CC) double-gate (DG) MOSFET structure was investigated by numerically solving coupled Schr$\"{o}$dinger-Poisson and current continuity equations in a self-consistent manner. The CC operation and corresponding enhancement of current drive and transconductance of CC-NMOS are confirmed by comparing with the results of DG-NMOS which are performed under the condition of 10-80 nm gate length. Device optimization was theoretically performed in order to minimize the short-channel effects in terms of subthreshold swing, threshold voltage roll-off, and drain-induced barrier lowering. The simulation results indicate that DG-MOSFET structure including CC-NMOS is a promising candidates and quantum-mechanical modeling and simulation calculating the coupled Schr$\"{o}$dinger-Poisson and current continuity equations self-consistently are necessary for the application to sub-40 nm MOSFET technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.185-192
• /
• 2013

In this paper, a clock and data recovery (CDR) circuit that supports triple data rates of 1.62, 2.7, and 5.4 Gbps for DisplayPort 1.2 standard is described. The proposed CDR circuit covers three different operating frequencies with a single VCO switching the operating frequency by the 3-bit digital code. The prototype chip has been designed and verified using a 65 nm CMOS technology. The recovered-clock jitter with the data rates of 1.62/2.7/5.4 Gbps at $2^{31}$-1 PRBS is measured to 7/5.6/4.7 $ps_{rms}$, respectively, while consuming 11 mW from a 1.2 V supply.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.527-534
• /
• 2006

Modern passenger cars with diesel engines are equipped with DOC(diesel oxidation catalyst) for the purpose of reducing HC and CO in the exhaust stream. Cold start exhaust emissions pose troubles here as on gasoline engine vehicles. As a result, some of the diesel passenger cars roll off todays the assembly lines with WCC(warm-up catalytic converter). Oxidation characteristics of the particulates in WCC is analyzed in this study by EEPS(engine exhaust particulate size spectrometer). The maximum number of PM is found to come out of WCC in sizes near 10nm when an HSDI diesel engine is operated under the conditions of high speed and medium to heavy load. When the temperature of the WCC exceeds $300^{\circ}C$, the number of PM smaller than 30 nm in diameter sharply increases upon passing through the WCC. Total mass of emitted PM gets reduced downstream of the WCC under low speed and light load conditions due to adsorption of PM onto the catalyst. Under conditions of high speed and medium to heavy load, the relatively large PM shrink or break into fine particles during oxidation process within the WCC, which results in more mass fraction of fine particles downstream of the WCC.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.285-289
• /
• 2004

Micro tensile test specimens of thin film single crystal silicon for the most useful structural materials in MEMS (Micro Electro Mechanical System) devices were fabricated using SOI (Silicon-on-Insulator) wafers and MEMS processes. Dimensions of micro tensile test specimens were thickness of $7\mu\textrm{m}$, width of 50~$350\mu\textrm{m}$, and length of 2mm. Top and bottom silicon were etched using by deep RIE (Reactive Ion Etching). Thin film aluminum markers on testing region of specimens with width of $5\mu\textrm{m}$, lengths of 30~$180\mu\textrm{m}$ and thickness of 200 nm for measuring tensile strain were fabricated by aluminum wet etching method. Fabricated side wall angles of aluminum marker were about $45^{\circ}~50^{\circ}$. He-Ne laser with wavelength of 633nm was used for checking fringed patterns.

• Applied Science and Convergence Technology
• /
• v.26 no.2
• /
• pp.26-29
• /
• 2017

Thin films of europium-doped yttrium oxide ($Y_2O_3$:Eu) were prepared on Si (100) substrates by using a radio frequency (RF) magnetron sputtering. After the deposition, the films were annealed at $1000^{\circ}C$ in an air ambient for 1 hour. X-ray diffraction analysis revealed that the $Y_2O_3$:Eu films had a polycrystalline cubic ${\alpha}-Y_2O_3$ structure. The as-deposited films showed no photoluminescence (PL), which was due to poor crystalline quality of the films. The crystallinity of the $Y_2O_3$:Eu films was significantly improved by annealing. The strong red PL emission was observed from the annealed $Y_2O_3$:Eu films and the highest intensity peak was centered at around 613 nm. This emission peak originated from the $^5D_0{\rightarrow}^7F_2$ transition of the trivalent Eu ions occupying the $C_2$ sites in the cubic ${\alpha}-Y_2O_3$ lattice. The broad PL excitation band was observed at wavelengths below 280 nm, which was attributed to the charge transfer transition of the trivalent Eu ion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.297-303
• /
• 2003

Mn-Ni-Co type thin films were prepared at various conditions by a rf magnetron sputtering system. At the condition. or substrate temperature of $300^{\circ}C$ and $Ar/O_2$= 10/0, a cubic spinel phase was obtained. When oxygen was included in process gas, a cubic spinel phase was not formed even after the thermal annealing at $900^{\circ}C$. The thermistor thin film had no other elements except Mn, Ni and Co. The infrared reflection spectra of the thermistor thin films showed that the films had somewhat high reflectance for incoming infrared ray with some angle. The etch rate of the thermistor thin films was about 63nm/min at a condition of DI water : $HNO_3$: HCl = 60 : 30 : 10 vol%. The B constant and temperature coefficient of resistance of the thermistor thin films were 3500 K and -3.95 %/K, respectively. The voltage responsivity of the thermistor thin film infrared sensor was 108.5 V/W and its noise equivalent power and specific detectivity were $5.1\times 10^{-7}$ W/$Hz^{-1/2}$ and $0.2\times 10^6$cm $Hz^{1/2}$/W, respectively.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.63-68
• /
• 2008

This study was performed to assess the potential use of ozone or UV radiation for the treatment of water contaminated with sulfamethoxazole (SMX), which is frequently used antibiotic in human and veterinary medicines, especially focusing on the kinetic study and effect of pH. In a study using ozone alone, kinetic study was performed to determine second-order rate constant ($k_{O3,SMX}$) for the reactions of SMX with ozone, which was found to be $1.9{\times}10^6M^{-1}s^{-1}$ at pH 7. The removal efficiencies of SMX by ozone were decreased with increase of pH due to rapid decomposition of ozone under the condition of various pH (2.5, 5.3, 7, 8, 10). In a UV irradiation study at 254 nm, a kinetic model for direct photolysis of SMX was developed with determination of quantum yield ($0.08mol\;Einstein^{-1}$) and molar extinction coefficient ($15,872M^{-1}cm^{-1}$) values under the condition of quantum shielding due to the presence of reaction by-products formed during photolysis. For effect of pH on photolysis of SMX, SMX in the anionic state ($S^-$, pH > 5.6), most prevalent form at environmentally relevant pH values, degraded more slowly than in the neutral state (SH, 1.85 < pH < 5.6) by UV radiation at 254 nm.