• 제목/요약/키워드: 5'-Modification

검색결과 2,294건 처리시간 0.038초

장일과 암기중단 처리가 바위솔의 생장과 개화에 미치는 영향 (Effect of Long-day and Night-break Treatment on Growth and Anthesis of Orostachys japonicus A. Berger)

  • 강진호;박진서;김재우
    • 한국작물학회지
    • /
    • 제40권5호
    • /
    • pp.600-607
    • /
    • 1995
  • 최근 바위솔은 항암제로서 효능이 알려지면서 일부 독농가를 중심으로 인공재배되기 시작하였으나 자연산과 출하기간이 중복되고 그 기간 또한 짧음으로서 재배 바위솔의 출하기간을 임의로 조절하거나 연장할 필요성이 대두되게 되었다. 본시험은 바위솔의 개화를 억제함으로서 출하기간을 연장할 수 있는가를 검토하여 바위솔의 인공재배에 대한 정보를 제공하고자 무처리의 자연일장에서 재배한 것에 비하여 추대기에 가해지는 장일 및 암기중단 처리가 바위솔의 생장 및 개화에 어떤 영향을 미치는가를 파악하고자 실시되었던 바 그 결과를 요약하면 다음과 같다. 1. 자연일장에 비하여 장일 및 암기중단 처리가 화서의 신장을 지연시켰으며 처리 6주후인 10월 하순경부터는 엽과 구엽수도 많고, 경직경의 감소도 없는 것으로 나타났다. 2. 자연일장에 비하여 장일 및 암기중단 처리에서는 엽과 구엽중은 처리 2주후부터, 경중은 처리 4주후부터, 근중은 처리 4주후부터 많았던 반면, 소화중은 처리 4주부터 6주까지 적은 것으로 나타났다. 한편 경제적 수량인 지상부 건물중은 10월 하순 이후부터 자연일장보다 장일 및 암기중단 처리에서 높은 것으로 나타났다. 3. 장일 및 암기중단 처리가 가해진 6주후인 10월 하순까지 소화수에는 처리간 차이가 없었으나, 10월 하순부터 일제히 개화하는 자연일장에 비하여 장일 및 암기중단 처리는 소화의 개화 및 개체의 개화율을 현저히 감소시겼다. 4. 추대 후 자연일장에서 자라는 바위솔은 소화가 sink로, 잎과 뿌리가 source로 작용하나, 장일 및 암기중단 처리에서는 줄기 및 소화가 sink인 것으로 분석되었다.

  • PDF

토양중 Paraquat의 효과적인 추출방법 (Extraction Method for Paraquat from Soil)

  • 권진욱;김용석;최종우;이규승
    • 한국환경농학회지
    • /
    • 제16권3호
    • /
    • pp.239-244
    • /
    • 1997
  • 토양중 tightly bound paraquat의 효과적인 추출방법을 모색코자 HCl 및 $H_2O_2$첨가 그리고, keldahl 분해장치를 이용하여 회수율 및 여과시간의 단축을 조사하였으며, ammonium chloride와 calcium chloride의 농도와 진탕 시간을 달리하여 loosely bound paraquat의 유출정도를 조사한 결과는 다음과 같다. 1. 토양 50g에 70ml의 conc. HCl을 첨가하여 시간별로 진탕하고 여기에 진한 황산을 가하여 1시간동안 환류 추출한 결과, 60분간 진탕할때 기존의 추출방법에 비해 A토양은 1.15배 높은 96.7%의 회수율과 4.64배 단축된 14분의 여과 시간을, B토양은 1.09배 높은 84.0%의 회수율과 4.91배 단축된 11분의 여과시간을 나타냈다. 아울러, 이러한 결과는 회수율의 증가는 물론 여과시간의 단축, pH조정과정에서 과다한 NaOH사용을 통한 총용량의 증가 방지, 그리고 전체적인 실험시간의 단축을 꾀할 수 있었다. 2. HCl의 첨가에 의한 진탕과정 없이 $H_2O_2$만을 첨가하는 경우, $H_2O_2$ 30ml첨가하여 30분간의 환류 재추출하는 것이 적정 수준이었는데, 회수율은 증대하였으나 여과시간의 단축은 거의 없었다. 반면, 50ml의 $H_2O_2$ 첨가만으로도 회수율의 증대는 있었으나 실험의 위험성을 고려시 적절하지 못하다고 생각된다. 3. Kjeldahl 분해장치를 이용한 방법으로 회수율의 증대를 나타내는 경향은 있었으나, 반복간의 큰 오차를 나타내었으므로 추출방법으로 적합하지 못하다고 생각된다. 4. Loosely bound paraquat의 추출을 위해 0.01, 0.1, 1, 10M ammonium chloride와 calcium chloride를 이용하여 1.5, 3, 6, 12, 24시간으로 진탕시간을 달리하여 분석한 결과, 시간, 농도, 추출액의 변화에도 불구하고 모든 처리구에서 paraquat은 검출한계 미만의 수준이었다.

  • PDF

Structure and Properties of Syndiotactic Polystyrene Fibers Prepared in High-speed Melt Spinning Process

  • Hada Yoshiaki;Shikuma Haruo;Ito Hiroshi;Kikutani Takeshi
    • Fibers and Polymers
    • /
    • 제6권1호
    • /
    • pp.19-27
    • /
    • 2005
  • High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

석회노분과 석회로 처리된 세립토의 단기적 역학특성 비교 (Comparison of Short-term Mechanical Characteristics of Fine-grained Soils Treated with Lime Kiln Dust and Lime)

  • 김대현;사공명;이용희
    • 한국지반공학회논문집
    • /
    • 제20권3호
    • /
    • pp.75-83
    • /
    • 2004
  • 인디아나주 도로국 (INDOT, Indiana Department of Transportation)에서는 부분적으로 1990년대 초반부터 토사개량(지반 안정화는 아님)에 대한 저비용의 건설재료로서 석회노분을 사용해왔다. 그러나 석회노분을 포함한 흙의 강도향상은 설계과정에서 노상의 안정화계산에 반영되지 않았다. 따라서 본 연구는 석회노분이 수화된 석회와 유사한 공학적 성질을 지닌 재료인지를 평가하기 위하여 수행되었으며, 인디아나주에서 흔히 접할수 있는 A-4, A-6, A-7-6와 같이 세립분이 우세한 다양한 흙과 조합하여 석회노분의 역학적 장점들을 평가하기 위해 일련의 실내실험들을 수행하였다. 본 연구에서는 아터버그한계, 표준다짐, 일축압축, CBR, 체적 안정성과 회복탄성계수등의 실험들을 수행하였으며 그 결과 비처리토에 비해 처리토의 경우 60-400% 정도의 범위로 일축압축강도가 증가하였다. 비혼합토에 대한 CBR 값의 범위가 3-18인 것에 반하여, 혼합토에 대한 CBR 값들은25-70의 범위내에 있다. 또한, 일반적으로 혼합토의 회복탄성계수도 상당히 증가하는 것으로 관찰되었다. 이상의 결과는 석회노분은 수화된 석회에 대한 대안으로서 실용적이고 경제적인 재료이며 세립토의 강도를 향상시키며 작업성을 향상시킬 수 있음을 암시한다.

중증도 분류체계를 이용한 중증도분류(Triage) (Severity of Emergency Patient classified by Triage System)

  • 배정희;손수경
    • 한국간호교육학회지
    • /
    • 제7권2호
    • /
    • pp.264-274
    • /
    • 2001
  • About the patients who visited the emergency department of a hospital, investigative study was performed to assess and to classify them with triage tool, and to estimate the characteristics of them. 210 patients older than 15 years were investigated. Among them 11 patients who had responded inappropriately were excluded and remaining 210 patients were chosen as study subjects. Investigation had been performed for 30 days from Jan. 10, 2001 to Feb. 9, 2001. The triage tool was designed through the modification of triage tools developed by Kim and Choi. The data were analyzed with the SPSS program using mean, standard deviation, frequency, percentage, ANOVA and Scheffe's test. The results were as follows: 1. Of the characteristics of the study subjects, mean age of patients were 55.76 years and 70-79 years group which included 41 patients(20.6%) were most numerous. 101 (51.8%) patients visited emergency room by 119 emergency service and 91(45.7%) patients walked with assistance. 127 patients were cared in internal medicine department. 2. The distribution of triage scores were from minimum 6 points to maximum 18 points with mean $13.76{\pm}2.58$ points. 3. Triage scores had significant relationship with age(F=13.349,P=0.000), visiting method (F=8.832, P=0.000), walking status(F=28.185, p=0.000), care department(F=2.596, P=0.019), and preexisting disease(F=12.012, P=0.000). 4. After trage there were no urgent patient, 35 emergent patients(17.6%),109 subemergent patients(54.8%), and 55 nonemergent patients (27.6%). The result of emergency care were 80 admission(40.2%), 59 discharge (29.6%), 34 ICU admission(17.1%), 14 transfer to other hospital(7%), 10 operation (5%), and 2 death (2%). 5. About the time required for triage, mean duration to triage were $7.54{\pm}2.28$ mins in emergent patients, mean $7.23{\pm}2.50$ mins in subemergent patients and mean $6.49{\pm}2.19$ mins in nonemergent patients. There were no differences in duration to triage according to the severity of triage. 6. Time required in emergency treatment were mean $116.23{\pm}88.10$ in emergent patients mean $101.61{\pm}73.27$ in subemergent patients and mean $81.56{\pm}61.01$ in nonemergent patients. There were no significant difference among groups. This study depicted that triage scores were below the middle level and there were many geriatric patients in this hospital. Among the characteristics of patients, age, visiting method, walking status, care department, and accompanying disease could be data for triage of emergency patients. With triage score of a patient, the outcome of emergency care of a patient could be anticipated and this could be basal data in determining the priority of emergency nursing.

  • PDF

상관결과의 왜곡 방지를 위한 재양자화 방법에 관한 연구 (A STUDY ON THE RE-QUANTIZATION METHOD FOR PREVENTING DISTORTION OF CORRELATION RESULT)

  • 염재환;오세진;노덕규;오충식;정진승;정동규
    • 천문학논총
    • /
    • 제27권5호
    • /
    • pp.419-429
    • /
    • 2012
  • In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

LiNi0.8Co0.15Al0.05O2 양극활물질의 전기화학적 특성 향상을 위한 MgF2 표면처리 효과 (Effect of MgF2 Surface Modification for LiNi0.8Co0.15Al0.05O2 Cathode Material on Improving Electrochemical Characteristics)

  • 진수진;서진성;나병기
    • Korean Chemical Engineering Research
    • /
    • 제58권1호
    • /
    • pp.52-58
    • /
    • 2020
  • 본 연구에서는 MgF2를 이용하여 LiNi0.8Co0.15Al0.05O2 양극활물질의 표면을 코팅하여 전기화학적 특성과 열적 안정성을 평가하였다. 코팅된 MgF2의 비율은 0.5, 1, 3 wt%로 조절하였다. 전기화학적 특성은 CV, 충·방전 프로파일, 출력특성, 수명특성을 분석하였고, 열적 안정성은 DSC 분석을 통하여 이루어졌다. 전기화학적 특성 분석 결과 0.1C에서 초기 방전 용량은 MgF2 코팅이 되었을 때 감소하였지만, 2C까지 출력을 향상 시켰을 때는 약간 향상된 방전 용량을 얻을 수 있었고, 수명특성 또한 향상되었다. 또한 DSC 분석 결과 코팅이 되었을 때 발열 온도가 증가하였고, 발열 피크의 세기 또한 감소하였다.

2차 아미노기를 갖는 실리카 나노입자와 (메타)아크릴레이트 단량체와의 마이클 부가반응에 대한 분광학적 분석 (Spectroscopic Analysis on the Michael Addition Reaction between Secondary Amino Group Containing Silica Nanoparticles with (Meth)acrylate Monomers)

  • 전하나;하기룡
    • 폴리머
    • /
    • 제36권5호
    • /
    • pp.668-676
    • /
    • 2012
  • 본 연구에서는 실리카 나노입자를 bis[3-(trimethoxysilyl)propyl]amine(BTMA) 실란 커플링제로 표면 개질한 후, 실리카에 도입되는 2차 아미노기인 -NH기와 Michael 부가반응이 가능한 acrylate기를 가지는 trimethylolpropane ethoxylate triacrylate(TMPET)와 3-(acryloyloxy)-2-hydroxypropyl methacrylate(AHM)로 표면 처리를 하여 반응성(meth)acrylate기를 가지는 brush를 도입하는 연구를 수행하였다. 1분자에 Michael 부가반응성이 있는 acrylate기를 3개 갖는 TMPET와 1분자에 반응성이 있는 acrylate기와 반응성이 없는 methacrylate기를 각각 1개씩 갖는 AHM을 사용하여, 처리 몰(mol)수의 변화가 실리카 표면에 도입되는 (meth)acrylate기에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA) 및 고체 상태 cross-polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. BTMA로 개질된 실리카를 TMPET로 처리하면, 액체상태의 순수 TMPET와 순수 BTMA의 반응과는 달리 TMPET 1분자당 3개씩 결합있는 acrylate기 대부분이 BTMA의 -NH기와 Michael 부가반응이 일어나는 것을 확인하였다. 따라서 BTMA로 처리한 실리카에 Michael 부가반응으로 반응성 (meth)acrylate기를 도입하기 위하여서는 AHM과 같이 Michael 부가반응성이 있는 acrylate기와 Michael 부가반응성이 없는 methacrylate기를 각각 1개씩 가지는 AHM을 사용하는 것이 필요함을 확인하였다.

In Vitro and In Vivo Studies of Different Liposomes Containing Topotecan

  • Hao, Yan-Li;Deng, Ying-Jie;Chen, Yan;Wang, Xiu-Min;Zhong, Hai-Jun;Suo, Xu-Bin
    • Archives of Pharmacal Research
    • /
    • 제28권5호
    • /
    • pp.626-635
    • /
    • 2005
  • Liposome as a carrier of topotecan (TPT), a promising anticancer drug, has been reported in attempt to improve the stability and antitumor activity of TPT. However, the biodistr ibution pattern of TPT liposome in vivo and PEG-modified liposome containing TPT have not been studied systemically. In this paper, the in vitro stability and in vivo biodistribution behavior of several liposomes containing TPT with different lipid compositions and PEG-modification were studied. Compared with the 'fluid' liposome (S-Lip) composed of soybean phosphatidylcholine (SPC), the 'solid' liposome (H-Lip) composed of hydrogenated soybean phosphatidylcholine HSPC decreased the leaking efficiency of TPT from liposome and enhanced the stability of liposome in fetal bovine serum (FBS) or human blood plasma (HBP). The results of biodistribution studies in S$_{180}$ tumor-bearing mice showed that liposomal encapsulation increased the concentrations of total TPT and the ratio of lactone form in plasma. Compared with free TPT, S-Lip and H-Lip resulted in 5- and 19- fold increase in the area under the curve (AUC$_{0\rightarrow\propto}$), respectively. PEG- modified H-Lip (H-PEG) showed 3.7-fold increase in AUC$_{0\rightarrow\propto}$ compared with H-Lip, but there was no significant increase in t$_{1/2}$ and AUC$_{0\rightarrow\propto}$ for PEG-modified S-Lip (S-PEG) compared with S-Lip. Moreover, the liposomal encapsulation changed the biodistribution behavior, and H-Lip and H-PEG dramatically increased the accumulation of TPT in tumor, and the relative tumor uptake ratios were 3.4 and 4.3 compared with free drug, respectively. There was also a marked increase in the distribution of TPT in lung when the drug was encapsulated into H-Lip and H-PEG. Moreover, H-PEG decreased the accumulation of TPT in bore marrow compared with unmodified H-Lip. All these results indicated that the membrane fluidity of liposome has an important effect on in vitro stability and in vivo biodistribution pattern of liposomes containing TPT, and PEG-modified 'solid' liposome may be an efficient carrier of TPT.

저매개변수 요소를 사용한 2차원 선형탄성 직접 경계요소법의 Kernel 적분법 (Kernel Integration Scheme for 2D Linear Elastic Direct Boundary Element Method Using the Subparametric Element)

  • 조준형;박영목;우광성
    • 한국전산구조공학회논문집
    • /
    • 제25권5호
    • /
    • pp.413-420
    • /
    • 2012
  • 본 논문은 2차원 선형탄성 직접 경계요소법에서 저매개변수 요소를 사용할 때 Kernel의 적분방법에 대하여 논의하였다. 일반적으로 등매개변수 요소의 경우 형상함수로 통칭되는 해의 기저함수와 요소의 적분을 위해 사용되는 사상함수를 동일하게 사용한다. 그러나 본 논문에서는 사상함수의 차수를 낮게 취하여 순수기저절점을 도입하고 그때 직접 경계요소의 Kernel을 적분하기 위한 방법이 모색되었다. 일반적으로 경계요소법의 적분 Kernel의 경우 Log수치적분과 코쉬주치(Cauchy principal value) 등을 통해 해결하는데, 본 논문에서는 대수적 조작을 통해 적분값의 정확도를 높일 수 있도록 새로운 수식을 유도하였다. 본 연구에서 저매개변수 기반의 직접 경계요소에 대한 강건성과 정확도를 검증하기 위해 2차원 타원형 편미분방정식으로 표현되는 평면응력과 평면변형문제에 대해 적용하였다. 적용 예제로는 단순연결영역(simple connected region)의 대표적 문제인 캔틸레버보와 다중연결영역(multiple connected region)의 대표적인 문제인 개구부가 있는 사각평면에 대해 각각 수치해석을 수행한 결과 대폭적인 자유도의 감소에 비해 정확도 측면에는 기존의 방법과 차이가 없음을 볼 수 있었다. 본 논문에서 제시된 방법은 기저함수 고차화 저매개변수 직접 경계요소법(subparametric high order boundary element)과 이에 기초를 둔 저매개변수 고차 이중경계요소법(subparametric high order dual boundary element)의 초석이 될 수 있을 것이다.