• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.643-647
• /
• 2011

In this paper, we study the application of DSSS(Direct Sequence Spread Spectrum) in underwater acoustic communication for robust the ISI(Inter-Symbol Interference. We confirm the application of DSSS in underwater acoustic communication in underwater by the simulation with underwater channel impulse response and experiment. As a simulation result, the BER of QPSK technique is $1.14{\times}10^{-1}$ and the BER of DSSS technique is $6.73{\times}10^{-3}$. And we performed the experiment of DSSS technique in underwater. As a experiment result, the BER of QPSK technique is $3.19{\times}10^{-1}$ and the BER of DSSS technique is $5.17{\times}10^{-4}$.

• Journal of information and communication convergence engineering
• /
• v.4 no.3
• /
• pp.114-117
• /
• 2006

In this paper, we fabricated the EM wave absorber for 94 GHz radar sensors using Permalloy of magnetic material with chlorinated polyethylene (CPE), and S-parameter was measured. The complex relative permittivity and permeability are calculated by the measured data. Absorption abilities are simulated according to different thickness of the EM wave absorbers, and the EM wave absorber was manufactured based on the simulated design. Simulated and measured results agree very well. As a result, we developed the EM wave absorber with the thickness of 1.15 mm which has an absorption ability of 18 dB at 94 GHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.476-485
• /
• 2014

PBL is a student-centered pedagogy in which students learn about a subject through the experience of problem solving. Marine engineer is the expert which supports the safe navigation and solves the problems could happen in independent situation as a ship. This study executed the fundamental study on the maritime training education for marine engineers using PBL. In this study, we conducted the survey on 56 students for 6 months using PBL in H university. The result showed the improvement on ability to solve the problems, interpersonal relationship, communication skill, synthetic thinking faculty and practical use of data but some students answered the complaint of the insufficient information and unacquainted learning method of PBL. This suggested the development and improvement plans for the maritime training education using PBL based on this fundamental study.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.512-518
• /
• 2011

The marine equipment industry in Korea has been growing along with shipbuilding industry since early 1980s. Major shipbuilding might be predicted to shift to China in the near future. Moreover, new paradigm of e-navigation is about to get geared in the real world, which was specifically noted by IMO (International Maritime Organization). In order to catch up with rapid changes in the environments, the industry sector should move fast, the public sector should setup proper measures, and the academic sector should spur the research and development of new technologies. In this paper, international marin equipment markets and standardization trends are presented along with several representative R&D activities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1314-1317
• /
• 2014

In this letter, we designed monopole microstrip antenna for WLAN / WiMAX system. The monopole antenna is designed by FR-4 substrate with size is $30mm{\times}40mm$. The proposed antenna is based on a planar monopole design which cover WLAN and WiMAX frequency bands. To obtainthe optimized parameters, we used the simulator, CST's Microwave Studio Program and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is designed. Thus the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.631-635
• /
• 2012

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In this paper, in order to design an efficient packet structure, we employ channel coding scheme and phase recovery algorithm. For channel coding scheme, half rate LDPC channel coding scheme with N=1944 and K=972 was used. Also, decision directed phase recovery was used for correcting phase offset induced by multipath. Based on these algorithms, we propose length of data for optimal packet structure in the environment of oceanic experimentation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.441-444
• /
• 2018

In this paper, a microstrip antenna for LTE / WiMAX is designed for UWB communication. The proposed antenna is designed for FR-4 (er = 4.3), 29[mm] x 45[mm], and can be used in the LTE frequency band of 1.82[GHz] and the WiMAX frequency band of 3.5[GHz]. Studio 2014 was used. The simulation results show 1.785[dB] at 1.82[GHz] and 1.720[dB] at 3.5[GHz]. S-parameters were also found to be less than -10dB (WSWR2: 1) in the desired frequency band. In order to achieve broadband, miniaturization, low cost and low loss, Width, length, width of transmission line, etc. were calculated. Therefore, it is considered that the applicable antenna can be applied satisfying the desired condition.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.391-400
• /
• 2013

Each country has recently established and operated so called Aids to Navigation(AtoN) AIS system collecting and transferring information on the sea state and AtoN's position. Korea has also decided to introduce the system and been establishing it. And it has already installed and operated this system in Incheon and Daesan. For the purpose of giving the national standards of AtoN AIS, this paper is to investigate the present states of AtoN AIS systems in the above two area and to suggest the improvement to the operation of AtoN AIS system. To make it, the paper deals with the international regulations of related AtoN AIS and the cases of foreign's AtoN AIS system installed and also investigates the operation states of the system, in five modules such as system management, system composition, information, function and cooperation. The followings are concluded; improving the inconsistency of system management, reducing operator's confusion caused by excessive display of AtoN AIS system, improving the problem of receiving unnecessary information, improving the functional problems caused by AIS communication inability and improving AtoN AIS information which is presently not used on board.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.213-217
• /
• 2014

In this paper, we designed monopole microstrip antenna for WLAN/WiMAX system. The monopole antenna is designed by FR-4 substrate with size is $30mm{\times}40mm$. The proposed antenna is based on a planar monopole design which cover WLAN and WiMAX frequency bands. To obtain the optimized parameters, we used the simulator, CST's Microwave Studio Program and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is designed. Thus the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.