• Journal of Plant Biotechnology
• /
• v.7 no.4
• /
• pp.225-231
• /
• 2005

Five day old cotyledon explants of Cucumber (Cucumis sativus L) cv Poinsett 76 were cocultivated with two Agrobacterium strains (EHA105 and LBA 4404) each carrying GUS as the reporter gene and npt-II as the selection marker gene in the T-DNA region of the vector. Transformed shoots were selected at 150 mg/L kanamycin. A two day cocultivation coupled with $20\;{\mu}M$ acetosyringone increased the frequency (8.2 and 15.4 shoots) of GUS expression in the shoots of transformed plant. Among the two Agrobacterium strains, EHA 105 performed better than LBA 4404 in bringing two-fold increase in transformation efficiency (14%) than LBA 4404 (7.4%). PCR analysis was done to confirm the integration of T-DNA into cucumber genome.

• YAKHAK HOEJI
• /
• v.47 no.1
• /
• pp.46-51
• /
• 2003

Baicalein and baicalin are flavonoid compounds isolated from medicinal herb Scutellaria baicalensis Georgi (Labiatae) and have been known to possess antiviral activities. In the present study, we investigated the in vitro effects of baicalein and baicalin on the three distinctive enzymatic activities of the human immunodeficiency virus type-1 (HIV-1) integrase-endonucleolytic, integration, and disintegration activities. Both compounds inhibited the three enzymatic activities in a dose-dependent manner. The 50％ inhibitory concentrations of baicalein and baicalin for endonucleolytic activities of HIV-1 integrase were 4.4$\pm$3.3 and 25.9$\pm$4.0$\mu$M, respectively. In general, baicalein exhibited nearly 6- to 10-fold stronger inhibition than baicalin for the three enzymatic activities. These data demonstrate that baicalein or baicalin can be used as a leading compound to develop anti-AIDS chemotherapeutic agents targeting to the HIV-1 integrase.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.319-325
• /
• 2010

3-D IC integration enables the smallest form factor and highest performance due to the shortest and most plentiful interconnects between chips. Direct metal bonding has several advantages over the solder-based bonding, including lower electrical resistivity, better electromigration resistance and more reduced interconnect RC delay, while high process temperature is one of the major bottlenecks of metal direct bonding because it can negatively influence device reliability and manufacturing yield. We performed quantitative analyses of the interfacial properties of Al-Al bonds with varying process parameters, bonding temperature, bonding time, and bonding environment. A 4-point bending method was used to measure the interfacial adhesion energy. The quantitative interfacial adhesion energy measured by a 4-point bending test shows 1.33, 2.25, and $6.44\;J/m^2$ for 400, 450, and $500^{\circ}C$, respectively, in a $N_2$ atmosphere. Increasing the bonding time from 1 to 4 hrs enhanced the interfacial fracture toughness while the effects of forming gas were negligible, which were correlated to the bonding interface analysis results. XPS depth analysis results on the delaminated interfaces showed that the relative area fraction of aluminum oxide to the pure aluminum phase near the bonding surfaces match well the variations of interfacial adhesion energies with bonding process conditions.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.352-360
• /
• 2012

Bacillus clausii I-52 which produced SDS- and $H_2O_2$-tolerant extracellular alkaline protease (BCAP) was isolated from heavily polluted tidal mud flat of West Sea in Incheon, Korea and stable strain (transformant C5) of B. clausii I-52 harboring another copy of BCAP gene in the chromosome was developed using the chromosome integration vector, pHPS9-fuBCAP. When investigated the production of BCAP using B. clausii transformant C5 through pilot-scale submerged fermentation (500 L) at $37^{\circ}C$ for 30 h with an aeration rate of 1 vvm and agitation rate of 250 rpm, protease yield of approximately 105,700 U/mL was achieved using an optimized medium (soybean meal 2%, wheat flour 1%, sodium citrate 0.5%, $K_2HPO_4$ 0.4%, $Na_2HPO_4$ 0.1%, NaCl 0.4%, $MgSO_4{\cdot}7H_2O$ 0.01%, $FeSO_4{\cdot}7H_2O$ 0.05%, liquid maltose 2.5%, $Na_2CO_3$ 0.6%). The enzyme stability of BCAP was increased by addition of polyols (10%, v/v) and also, the stabilities of BCAP towards not only the thermal-induced inactivation at $50^{\circ}C$ but also the SDS and $H_2O_2$-induced inactivation at $50^{\circ}C$ were enhanced. Among the polyols examined, the best result was obtained with propylene glycol (10%, v/v). The BCAP supplemented with propylene glycol exhibited extreme stability against not only the detergent components such as ${\alpha}$-orephin sulfonate (AOS) and zeolite but also the commercial detergent preparations. The granulized enzyme of BCAP was prepared with approximately 1,310,000 U/g of granule. Wash performance analysis using EMPA test fabrics revealed that BCAP granule exhibited high efficiency for removal of protein stains in the presence of anionic surfactants as well as bleaching agents. When compared to Savinase 6T$^{(R)}$ and Everlase 6T$^{(R)}$ manufactured by Novozymes, BCAP under this study probably showed similar or higher efficiency for the removal of protein stains. These results suggest that the alkaline protease produced from B. clausii transformant C5 showing high stability against detergents and high wash performance has significant potential and a promising candidate for use as a detergent additive.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.65-72
• /
• 2003

To achieve cost and size reductions, we developed a low cost manufacturing technology for RF substrates and a high performance passive process technology for RF integrated passive devices (IPDs). The fabricated substrate is a conventional 6" Si wafer with a 25${\mu}m$ thick $SiO_2$ surface. This substrate showed a very good insertion loss of 0.03 dB/mm at 4 GHz, including the conductive metal loss, with a 50 ${\Omega}$ coplanar transmission line (W=50${\mu}m$, G=20${\mu}m$). Using benzo cyclo butene (BCB) interlayers and a 10 ${\mu}m$ Cu plating process, we made high Q rectangular and circular spiral inductors on Si that had record maximum quality factors of more than 100. The fabricated inductor library showed a maximum quality factor range of 30-120, depending on geometrical parameters and inductance values of 0.35-35 nH. We also fabricated small RF IPDs on a thick oxide Si substrate for use in handheld phone applications, such as antenna switch modules or front end modules, and high-speed wireless LAN applications. The chip sizes of the wafer-level-packaged RF IPDs and wire-bondable RF IPDs were 1.0-1.5$mm^2$ and 0.8-1.0$mm^2$, respectively. They showed very good insertion loss and RF performances. These substrate and passive process technologies will be widely utilized in hand-held RF modules and systems requiring low cost solutions and strict volumetric efficiencies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.133-141
• /
• 1991

The empirical method is used to integration adjustment for the coordinates revision of a national control point but the existing values are not to be changed or changed with small variation by suitable datum selection (for example, fixed points). This paper treats the modified weighted station parameter adjustment by quasi-observations, and the method used only variance elements of existing coordinates which is substituted for all covariance elements. The movement detection of unstable points and the junction adjustment of new networks are successfully executed by the method, in integration of new secondary networks to old-secondary-triangulation points which are in the absence of the original observations in Korea. The investigation results reveal that the accuracy of old-secondary-triangulation points is ${\pm}16^{{\prime}{\prime}}$(${\pm}0.08m$), which results from the densification of test network and the analyses of old survey specifications. and is ${\pm}2.3^{{\prime}{\prime}}$ in fixing of old-secondary-triangulation points.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.38-45
• /
• 2010

A new readout circuit involving a pixel-level reset control was studied for 2-D long wavelength infrared focal plane arrays. The integration time of each pixel can be optimized individually and automatically. Hence, the readout circuit has a wide dynamic range and good signal-to-noise ratio characteristics. The readout circuit was fabricated with a $0.35{\mu}m$ 2-poly 4-metal CMOS process for a $128{\times}128$ long wavelength infrared HgCdTe array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The smart reset control with two-step background suppression improves the signal-to-noise ratio to 87dB and the dynamic range to 95.8dB.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.1
• /
• pp.63-69
• /
• 1997

Erythropoietin (EPO) is a glycoprotein that mediates the growth and differentiation of erythroid progenitors. In order to produce recombinant human erythropoietin in tobacco plant, the EPO genomic DNA (5.4 kb) was cloned into plant expression vectors, pBI$\Delta$GUS121, pBD$\Delta$GUS121 and pPEV-1, and introduced in Nicotiana tabacum (var. Xanthi) via Agrobacterium tumefaciens-mediated transformation. After selection on MS media containing kanamycin (Km), 10 Km-resistant plants were obtained per each construct. The correct integration of EPO genomic DNA in the genome of transgenic plant was confirmed by polymerase chain reaction (PCR). Northern blot showed that transcripts of 1.8 kb length were produced in leaves of the plants, but there was no difference of mRNA amount according to promoter number and 5'-untranslated sequence (UTS). The proteins obtained from leaves of transgenic plants were immunologically detected by Western blot using rabbit anti-human EPO polyclonal antibody. The expressed protein appeared as smaller band of apparent mass of 30 kDa as compared to the EPO protein from human urine (37 kDa), suggesting that the modification (glycosylation) system in tobacco plant might be different from that of mammalian cells.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.225-234
• /
• 2009

Real-time Aerial Monitoring System (RAMS) is to perform the rapid mapping in an emergency situation so that the geoinformation such as orthophoto and/or Digital Elevation Model is constructed in near real time. In this system, the GPS/INS plays an very important role in providing the position as well as the attitude information. Therefore, in this study, the performance of an IMU sensor which is supposed to be installed on board the RAMS is evaluated. And the integration algorithm of GPS/INS are tested with simulated dataset to find out which is more appropriate in real time mapping. According to the static and kinematic results, the sensor shows the position error of 3$\sim$4m and 2$\sim$3m, respectively. Also, it was verified that the sensor performs better on the attitude when the magnetic field sensor are used in the Aerospace mode. In the comparison of EKF and UKF, the overall performances shows not much differences in straight as well as in curved trajectory. However, the calculation time in EKF was appeared about 25 times faster than that of UKF, thus EKF seems to be the better selection in RAMS.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.3
• /
• pp.31-42
• /
• 2015

The Reinforced subgrade for railroad (RSR) was constructed for one way railway line with the dimension of 5 m high, 6 m wide and 20 m long to evaluate its performance under train design load. The RSR has characteristics of short length (0.3-0.4 H) of reinforcement and rigid wall, 30 and 40 cm vertical spacing of reinforcement installation. To enhance economics and constructability, three kinds of connections (welding, hinge & bolt, bold wire) were also designed to realize the integration between rigid wall and reinforced subgrade. Two times of static loading tests were done on the full size railroad subgrade. The maximum applied pressure was 0.98 MPa (the maximum test load 5.88 MN), which corresponds to 19.6 times of the design load for railroad subgrade, 50 kPa. The performance on the RSR was evaluated with the safety on the failure, subgrade bearing capacity and settlement, horizontal displacement of wall, and reinforcement strain. Based on the full scale test, we confirmed that the RSR with the conditions of 0.35 H (35% of height) short reinforcement length, hinge & bolt type connection for integration between rigid wall and reinforced subgrade, and 40cm vertical spacing of reinforcement installment shows good performance under train design load.