• Tuberculosis and Respiratory Diseases
• /
• v.40 no.6
• /
• pp.677-682
• /
• 1993

Background: Massive hemoptysis is a major clinical problem with high mortality. Bronchial artery embolization is well accepted and widely used for treatment of massive and recurrent hemoptysis, especially in patients with chronic diffuse pulmonary disease who are poor candidates for surgery. We evaluated the therapeutic effect of transcatheter arterial embolization for immediate control and prevention of recurrent hemoptysis. Method: We reviewed 20 cases(M:F=13:7) of bronchial artery embolization for the management of massive hemoptysis from Jun 1989 to Aug 1992 retrospectively. Results: Underlying causes of hemoptysis were pulmonary tuberculosis(n=14), bronchiectasis(n=3), aspergilloma(n=2) and paragonimiasis(n=1). Embolization material was choosed randomly gelfoam(n=7) or Ivalon(n=11) and in 2 cases both were used simultaneously. Target arteries of embolization were bronchial artery only in 15 cases, non-bronchial systemic arteries with or without bronchial artery in 5 cases. After the arterial embolization, immediate cessation of hemoptysis was achieved in 17 cases(85%) and total recurrence rate including 3 cases of immediate treatment failure was 50%. Among recurrences 3 cases were achieved lobectomy, 1 case was expired by asphyxia due to massive hemoptysis and remained 6 were managed by medical conservative treatment with no further recurrence of hemoptysis during follow up periods. Conclusion: Bronchial artery embolization for treatment of massive or recurrent hemoptysis was effective in immediate bleeding control. Despite high recurrence rate the rebleeding after embolization was less severe and controllable by conservative management. Bronchial artery embolization is valuable as primary trial to massive hemoptysis.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.583-591
• /
• 1997

The functional derangement of skeletal muscles which may be attributed to chronic hypoxia has been accepted as a possible mechanism of exercise impairment in patients with chronic obstructive pulmonary disease (COPD). The metabolic changes in skeletal muscle in patients with COPD are characterized by impaired oxidative phosphorylation, early activation of anaerobic glycolysis and excessive lactate and hydrogen ion production with exercise. But the cause of exercise limitation in patients with chronic lung disease without hypoxia has not been known. In order to evaluate the change in the skeletal muscle metabolism as a possible cause of the exercise limitation in chronic lung disease patients without hypoxia, we compared the muscular metabolic data of seven male patients which had been derived from noninvasive $^{31}P$ magnetic resonance spectroscopy(MRS) with those of five age-matched normal male control persons. $^{31}P$ MRS was studied during the sustained isometric contraction of the dominant forearm flexor muscles up to the exhaustion state and the recovery period. Maximal voluntary contraction(MVC) force of the muscle was measured before the isometric exercise, and the 30% of MVC force was constantly loaded to each patient during the isometric exercise. There were no differences of intracellular pH (pHi) and inorganic phosphate/phosphocreatine(Pi/PCr) at baseline, exhaustion state and recovery period between two groups. But pHi during the exercise was lower in patients group than the control group (p < 0.05). Pi/PCr during the exercise did not show significant difference between two groups. These results suggest that the exercise limitation in chronic lung disease patients without hypoxia also could be attributed to the abnormalities in the skeletal muscle metabolism.

• Journal of Aquaculture
• /
• v.21 no.1
• /
• pp.26-33
• /
• 2008

This study investigated the synergistic effects of dietary supplementation of quartz porphyry(QP) and a laboratory developed feed stimulants, BAISM(BS) on growth performance and utilization as the additives for juvenile eel Anguilla japonica. Six isoenergetic experimental diets(18.2 kJ/g) were formulated to contain 50% crude protein, 15% lipid with or without dietary QP(Song-Gang stone, Davistone, Korea) and BS supplementation. QP and BS were provided at 0% in the control diet($Q_0B_0$) and at 0.7% QP+0% BS($Q_{0.7}B_0$), 0.7% QP+0.3% BS($Q_{0.7}B_{0.3}$), 0.7% QP+0.5% BS($Q_{0.7}B_{0.5}$), 0.7% QP+0.75% BS($Q_{0.7}B_{0.75}$) and 0.7% QP+1.0% BS($Q_{0.7}B_{1.0}$) in experimental diets on dry matter basis. After four weeks of adaptation, triplicate groups of 30 fish initially averaging $15{\pm}0.1g(mean{\pm}SD)$ were randomly distributed into each aquarium, and they were fed one of the experimental diets for 8 weeks. By the end of the feeding trial, weight gain(%), specific growth rate(%), feed efficiency(%) and protein efficiency ratio of fish fed diet $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$, were significantly higher(P<0.05) than those of fish fed the other diets. But, $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$ were no significant differences(P<0.05). In challenge test, fish were infected by intraperitoneal injection of 0.1 mL bacterial suspension with Edwardsiella tarda per fish after the feeding trial. As a result, fish fed QP and BS supplemented diets have a significantly higher cumulative survival rate than those of fish fed control diet(P<0.05). In conclusion, these results indicated that the optimum dietary supplementation level of QP and BS could be approximately 0.7% quartz porphyry+0.5% BAISM($Q_{0.7}B_{0.5}$) of diet based on WG, FER, SGR, PER, cumulative survival rate in juvenile eel A. japonica.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Korean Journal of Food Science and Technology
• /
• v.10 no.1
• /
• pp.78-82
• /
• 1978

In a series of studies on the utilization of persimmons, the purpose of this experiment was to examine the optimum thickness of film using different number of persimmons per film bag. 'Fuyu', persimmon variety was used in this investigation. The results obtained were as follows: The optimum thickness of the film bag was 0.08mm, 0.06mm, and 0.04mm for the bags packed with 3, 10 and 50 persimnons, respectively. The changes in the ratio of firmness, loss of fresh weight, titrable acidity and percentage of sugar contents were minimal in these three optimum combinations than the others. These results could be explained by the balanced optimum gas concentration, $CO_2$ 5-10% and $O_2$ 5%, in those three optimum combination. Therefore, it was suggested that the different thickness of film bag needs a particular number of fruits packed per bag for the long term storage in persimmons.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.50-56
• /
• 2009

This study was carried out to determine the optimum extraction conditions for Ishige okamurai by comparing the yields, total phenolic compound content (TPC), and antioxidant properties of its 95%, 70%, 50% fermented ethyl alcohol and water extracts. Additionally, the effects of heat and pH treatments on the antioxidant properties of the extracts were evaluated by their TPC and 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging capabilities. The yields of the extracts were greatest in the order of water > 50% > 70% > 95% fermented ethyl alcohol, and the TPC of the 70% (26.18%) and 50% fermented ethyl alcohol (27.56%) extracts were higher than those of the others. However, in terms of DPPH radical scavenging and ferrous-reducing power, the 70% fermented ethyl alcohol extract of Ishige okamurai showed the highest antioxidant effects. Additionally, in the results for the heat and pH treatments, the antioxidant properties of the 70% fermented ethyl alcohol extract were not influenced by the treatment conditions except at pH 10.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.690-696
• /
• 2013

The objective of this study was to investigate the protective effect of extracts from Canavalia gladiata (CGE) on gastric inflammation induced by alcohol treatment in SD rats. Rats were divided into four groups: G1 (normal group), G2 (gastric inflammation induced by alcohol), G3 (gastric inflammation induced by alcohol with lansoprazole pretreatment), G4 (gastric inflammation induced by alcohol with 250 mg/kg b.w. CGE pretreatment), G5 (gastric inflammation induced by alcohol with 500 mg/kg b.w. CGE pretreatment). After the oral administration of 40% alcohol and samples for seven days, acute gastritis was induced with 70% alcohol and 0.15 M HCl. After 1 h of alcohol administration, the animals were sacrificed. Groups pretreated with lansoprazole or CGE showed an attenuation of gastric mucosal injury, including decreases in sub-epithelial loss, hemorrhages, and gastric juice secretion induced by administration of alcohol. The oral administration of CGE (500 mg/kg b.w.) significantly decreased the levels of TBARS. To examine molecular factors that regulate inflammation, the protein expression of NF-${\kappa}B$ and COX-2 were measured through immuno-histochemistry. Compared with the normal group (G1), the expression of NF-${\kappa}B$ and COX-2 were clearly increased in G2. COX-2 and NF-${\kappa}B$ were expressed even higher in groups pretreated with CGE compared to G2. In conclusion, our data show that Canavalia gladiata has inhibitory and protective effects on gastric inflammation induced by alcohol treatment in SD rats.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.6
• /
• pp.522-527
• /
• 2004

Purpose: The purpose of this study was to evaluate the usefulness of single photon emission computed tomography (SPECT) of bone using Tc-99m MDP in the diagnosis of osteoporotic vertebral fractures. Materials and Methods: Thirty two patients with osteoporotic vertebral fracture were included in this study (mean age: $67{\pm}8$, male: 5, female: 27). Seventy nine vertebral fractures were detected (38 thoracic/thoracolumbar lesions and 41 lumbar lesions), which were classified by type of deformity (wedge, biconcave or compression). The patterns and locations of increased uptakes were examined and analyzed. Results: Forty seven wedge fractures, 20 biconcave fractures and 12 compression fractures were found. Diffuse and asymmetric uptakes were common in fractured bodies. More than one uptake were examined in 69 posterior elements of fractured vertebrae (87.3%) including 40 of 47 wedge fractures (85.1%), 17 of 20 biconcave fractures (85.0%) and 12 of 12 compression fractures (100%). Wedge fractures were predominant fracture in thoracic/thoracolumbar spine whereas incidence of biconcave or compression type war similar to that of wedge fracture in lumbar spine (p=0.04). Spinous process uptake was more frequently seen in lumbar lesions than thoracic/thoracolumbar lesions (p=0.009). Facet joint uptake in biconcave fracture was more common in lumbar spine (92.3%) than thoracic/thoracolumbar spine (57.1%). Spinous process uptake in biconcave fracture was also more frequently detected in lumbar spine (p=0.043). Conclusion: Bone SPECT was useful in the evaluation of osteoporotic vertebral fracture, especially posterior elements of vertebrae.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.