• 한국광학회지
• /
• 제10권1호
• /
• pp.73-79
• /
• 1999

1$\times$2, 1$\times$4 및 4$\times$4 LD-gate형 반도체 광스위치 모듈을 제작하였다. 스위치 소자와 광섬유와의 광결합을 위해서 테이퍼드 광섬유를 어레어로 제작하여 사용하였으며 30핀 버터플라이형 패키지로 완성하였다. 광 부푼 정렬 및 고정에서는 레이저 용접법 및 햄머링 공정을 이용하여 최초의 광정렬 값에서 평균 82%까지 복원하였다. 완성된 모듈에 대한 평가를 위해 전송 실험을 수행하였는데 1$\times$2 스위치 모듈이 삽입되었을 때 223-1의 단어길이를 갖는2.5Gbps 광신호에 대해서 전송패널티가 약0.5dB~2dB로 나타났으며, 광섬유의 분산특성에 의하여 발생하는 전송 패널티에 대해서는 50km 및 90km 광섬유에 대해서 각각 0.6dB 및 0.7dB의 작은 패널티가 발생하였다. 1$\times$4 및 4$\times$4 스위치 모듈을 이용한 전송특성 평가에서도 모두 -30dB 이하의 수신감도를 갖는 우수한 결과를 보였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권4호
• /
• pp.360-366
• /
• 2005

In the past, when there were few vehicles on the road, the T.O.D.(Time of Day) traffic signal worked very well. The T.O.D. signal operates on a preset signal cycling which cycles on the basis of the average number of average passenger cars in the memory device of an electric signal unit. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, $30-45\%$ of conventional traffic cycle is not matched to the present traffic cycle. In this paper we proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which doesn't consider vehicle length.

• 한국전문물리치료학회지
• /
• 제29권4호
• /
• pp.262-268
• /
• 2022

Background: Virtual reality (VR) programs based on motion capture camera are the most convenient and cost-effective approaches for remote rehabilitation. Assessment of physical function is critical for providing optimal VR rehabilitation training; however, direct muscle strength measurement using camera-based kinematic data is impracticable. Therefore, it is necessary to develop a method to indirectly estimate the muscle strength of users from the value obtained using a motion capture camera. Objects: The purpose of this study was to determine whether the pedaling speed converted using the VR engine from the captured foot position data in the VR environment can be used as an indirect way to evaluate knee muscle strength, and to investigate the validity and reliability of a camera-based VR program. Methods: Thirty healthy adults were included in this study. Each subject performed a 15-second maximum pedaling test in the VR and built-in speedometer modes. In the VR speedometer mode, a motion capture camera was used to detect the position of the ankle joints and automatically calculate the pedaling speed. An isokinetic dynamometer was used to assess the isometric and isokinetic peak torques of knee flexion and extension. Results: The pedaling speeds in VR and built-in speedometer modes revealed a significantly high positive correlation (r = 0.922). In addition, the intra-rater reliability of the pedaling speed in the VR speedometer mode was good (ICC [intraclass correlation coefficient] = 0.685). The results of the Pearson correlation analysis revealed a significant moderate positive correlation between the pedaling speed of the VR speedometer and the peak torque of knee isokinetic flexion (r = 0.639) and extension (r = 0.598). Conclusion: This study suggests the potential benefits of measuring the maximum pedaling speed using 3D depth camera in a VR environment as an indirect assessment of muscle strength. However, technological improvements must be followed to obtain more accurate estimation of muscle strength from the VR cycling test.

• 지식경영연구
• /
• 제13권4호
• /
• pp.55-69
• /
• 2012

This paper developed measurement indices for intellectual capital of public R&D organizations and investigated causal relationships among the components. We developed 10 measurement factors and 37 indicators and confirmed the reliability of these measurements. We offered an alternative to the existing model for searching causal relationships. From our survey research, using the structural equation model, we found a new relationship. In contrast to the existing model, we found a cycling relationship among three variables: human capital causes structural capital, structural capital causes relational capital, and relational capital causes human capital.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Journal of Microbiology and Biotechnology
• /
• 제22권6호
• /
• pp.763-770
• /
• 2012

Pseudomonas fluorescens 2112, isolated in Korea as an indigenous antagonistic bacteria, can produce 2,4-diacetylphloroglucinol (2,4-DAPG) and the siderophore pyoveridin2112 for the control of phytophthora blight of red-pepper. P. fluorescens 2112 was classified into a new genotype C among the 17 genotypes of 2,4-DAPG producers, by phlD restriction fragment length polymorphism (RFLP). The colonizing ability of P. fluorescens 2112 in pea rhizosphere was equal to the well-known pea colonizers, P. fluorescens Q8r1 (genotype D) and MVP1-4 (genotype P), after 6 cycling cultivations for 18 weeks. Four tested 2,4-DAPG-producing Pseudomonas spp. could colonize with about a 96% dominance ratio against total bacteria in pea rhizosphere. The strain P. fluorescens 2112 was as good a colonizer as other Pseudomonas spp. genotypes in pea plant growth-promoting rhizobacteria.

• 한국해양학회지:바다
• /
• 제17권2호
• /
• pp.120-129
• /
• 2012

낙동강 하구에 위치한 갯벌 퇴적물에서 2005년 7월부터 2006년 9월까지 퇴적물-수층을 통한 산소와 용존 무기질소 플럭스, 그리고 탈질소화율을 계절별로 조사하였다. 현장 조건 수온에서 퇴적물 배양을 통해 측정된 산소 플럭스의 범위는 $-37.0{\sim}0.5mmol\;O_2\;m^{-2}\;d^{-1}$이었고, 수온이 증가할수록 퇴적물에 의한 산소소모가 많아져, 수층에서 퇴적물로의 산소 플럭스가 증가하였다. 탈질소화율은 $4{\sim}2732{\mu}mol\;N\;m^{-2}\;d^{-1}$의 범위로 같은 방법으로 측정한 국내 연안의 결과보다 높은 값을 나타냈고 산소 플럭스와 유사한 계절변화를 보였다. 질소동위원소를 이용하여 측정된 탈질 소화율은 수층에서 퇴적물로 유입되는 질산염 플럭스와 높은 상관관계를 보였다. Isotope pairing technique에서 계산되는, 총 탈질소화 중 "수층에서 유입된 질산염을 이용하는 탈질소화($D_w$)"도 수층에서 유입되는 질산염 플럭스와 양의 상관 관계를 보여 수층에서 유입되는 질산염이 탈질소화의 계절변동의 원인임을 시사하였다. 여름철에 질산염농도가 높은 담수의 유입 증가가 낙동강 하구 퇴적물로의 질산염 유입과 탈질소화를 촉진시킨 것으로 추정된다. 낙동강 하구 퇴적물에서 생지화학적 과정의 일반적인 패턴 및 경향을 파악하기 위하여, 이 연구에서 측정된 여러 생지화학적 플럭스를 방향과 크기에 따라 분류하여 보았다. 그 결과, 수온과 질산염 유입 변화에 따라서 여름철에는 수층에서 퇴적물로의 산소와 질산염 플럭스가 높게 나타나고 탈질소화도 높은 반면, 여름철을 제외한 나머지 시기에는 이들 플럭스가 낮아, 갯벌 퇴적물의 생지화학적 과정이 낙동강 담수 유입에 민감하게 반응함을 알 수 있었다.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.23-38
• /
• 2003

The purpose of this study is to develop an improved marker auto-identification algorithm for reduce of data processing time through improve the efficiency of noise elimination and marker separation. The maker auto-identification algorithm was programming named KUMAS used Delphi language. For the study, various experiments were conducted for the verification of KUMAS. and compared two systems of established with the KUMAS. Four different motions - cycling, gait, rotation, and pendulum -, were selected and tested. Motions were filmed 30Hz frames rate per second. ${\chi}^2$ used for statistical analysis. Significant level were ${\alpha}=.05$. The test results were as follow. 1. Increased the success ratio of marker auto-identification. 2. The efficiency of marker auto-identification was remarkably improved through marker separation, noise elimination. 3. The marker auto-identification ability was improved in 2D-image plane include the 3D motion. 4. Significant different were found between KUMAS and B-SYS(established system) with non-input the artificial noise frames, input the artificial noise frames and total frames.

• 한국수소및신에너지학회논문집
• /
• 제7권2호
• /
• pp.173-180
• /
• 1996

4-probe resistivity measurement technique was used to study kinetics of hydrogen absorption-desorption on Pd film($520{\AA}$ thick) at room temperature upto 1 bar. Kinetics data are fitted well to 1st order kinetics equation in ${\alpha}$ and ${\alpha}^{\prime}$ phases. In ${\alpha}+{\alpha}^{\prime}$ phase, absorption kinetics was very complicated, but it could be explained partially with nucleation and growth process. Ln(dR/dt) vs. time plot gives rate constant k value(R is resistance of sample, t is time). k value for absorption is $4^{-6}{\times}10^{-4}/sec$ in ${\alpha}$ phase. k is increasing upto $4^{\times}10^{-2}/sec$ as hydrogen pressure increasing in ${\alpha}^{\prime}$ phase. k is proportional to ln(Pop/Peq), where Peq is equilibrium plateau pressure and Pop is the opposing pressure. In contrast to bulk sample k value was decreasing with increasing number of A-D cycling in ${\alpha}^{\prime}$ phase absorption.

• Journal of Electrochemical Science and Technology
• /
• 제5권4호
• /
• pp.95-104
• /
• 2014

Electrochemical performance of Li-ion cells with $LiMn_2O_4$ cathodes and graphite anodes with carbonates electrolytes containing quaternary ammonium-based room temperature ionic liquids (ILs) is investigated. Eight different ILs based on tetraalkylammonium, pyrrolidinium or piperidinium cations paired with bis(trifluoromethylsulfonyl)imide or tris(pentafluoroethyl)trifluorophosphate anions are examined in combination with dimethyl carbonate as a main solvent and fluoroethylene carbonate as a solid electrolyte interface forming agent. It is shown that cycling properties of the cells are strongly affected by the content of ILs in the electrolyte mixtures and its increase corresponds to lower discharge capacity retention. Since viscosity and conductivity of ILs are of a great importance for the electrolytes formulation, some kind of combined parameter should be used for the assessment of IL applicability and calculated values of Walden products for neat ILs represent one of the possible options. Besides, positive effect of ILs on reduction of flammability and enhancement of thermal stability of electrolytes in contact with charged electrodes have been demonstrated by means of self-extinguishing time test and differential scanning calorimetry respectively.