• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.256-261
• /
• 2001

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and to found the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.72-72
• /
• 2002

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and find the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test(400℃), the fracture is not happened in the welding part but base metal and the result of corrosion test(400℃ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.15-19
• /
• 1989

The oxidative stability of palm oil with moisture addition during heationg was investigated and the antioxidant effects of tocopherol, citric acid and sodium polyphosphate were evaluated. The addition of natural tocopherol up to 200 ppm level did not improve the oxidative stability of palm oil with moisture (1m1 $H_2O$ additive to 200g of oil at $180^{\circ}C$). The maximum antioxidant effect was observed at the Concentration of 400 ppm. Addition of citirc acid did not influence the effective concentration of tocopherol. Whereas addition of sodium polyphosphate and citric acid increased the antioxidant effect of tocopherol. The maximum synergistice effect was observed at the concentrations of 50 ppm citric acid and 50 ppm of sodium polyphosphate. Addition of 50 ppm citric acid and 50 ppm sodium polyphosphate to 100 ppm of tocopherol exceeded the antioxidant effect of 400 ppm tocopherol alone.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1177-1180
• /
• 2003

Thallium is quantitatively retained by 1,10-phenanthroline and tetraphenylborate onto benzophenone in the pH range 0-11 from a large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of thallium complex and benzophenone is dissolved with 5 mL of dimethylformamide and the metal was determined by flame atomic absorption spectrometric. About 0.4 ㎍ of thallium can be concentrated from 400 mL of aqueous sample, where its concentration is as low as 1.0 ng/mL. Eight replicate determinations of 8.0 ㎍/mL of thallium in final dimethylformamide solution gave a mean absorbance of 0.160 with a relative standard deviation of 1.7%. The sensitivity for 1% absorption was 0.22 ㎍/mL. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of thallium in various alloys and biological samples.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.479-480
• /
• 2006

The purpose of this paper is to investigate the relationship between CMP(Chemical Mechanical Polishing) characteristics of ITO thin film and friction signal by using the CMP monitoring system. Suba 400 pad and MSW2000 slurry of the Rohm & Haas Co. was used in this experiment to investigate the charateristics of ITO CMP. From this experiment, it is proven that the coefficient of friction is related to uniformity of the removal rate of the ITO thin film. Therefore, the prediction of polishing result would be possible by measuring friction signal.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.97-99
• /
• 2014

포항가속기 연구소에서 4세대 전자를 가속시키기 위하여 RF 공급원으로 사용하는 펄스 모듈레이터의 고전압 안정도는 50ppm 이하의 고전압이 요구된다. 200 MW 모듈레이터에 공급하기 위하여 개발된 고전압 CCPS사양은 50 kV, 120 kJ/sec, 2400mA, 20ppm이하이다. XFEL용 모듈레이터는 고정밀 고전압 CCPS를 적용하여 운전하였으며 모듈레이터 사양은 400kV, 500A, 8us, 60Hz, beam voltage stability 0.005(%)이다. 본 논문에서는 개발한 고정밀 고전압 CCPS를 사용하여 시험한 모듈레이터의 시험 결과에 대하여 발표하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.292-296
• /
• 2024

In this study, Iron (III) oxide-hydroxide (δ-FeOOH) was successfully synthesized using hydrogen peroxide (H₂O₂) as an oxidizing agent. The synthesis of δ-FeOOH was carried out by controlling the amount of H₂O₂, and pure δ-FeOOH was successfully synthesized in ranges from 0.2 mL to 0.6 mL of H₂O₂. The size of the synthesized δ-FeOOH particles was compared by controlling the amount of oxidant H₂O₂. The average particle size of the synthesized pure δ-FeOOH particles increased from 875.1 nm to 897.2 nm as the amount of H₂O₂ was increased. The optical properties of δ-FeOOH synthesized under these specific conditions were investigated. All δ-FeOOH showed a similar trend of increasing and decreasing light absorption from 800 nm to 400 nm, although there was a slight difference in the amount of light absorption, with the largest amount of light absorption at 410 nm. The band gap energy of δ-FeOOH through the Tauc plot method was about 2.1~2.2 eV when H₂O₂ was 0.2~1.4mL. With a sufficient small particle size, simple control of that particle size, and a small band gap energy enough to absorb light in the visible spectrum, δ-FeOOH could be useful in a variety of applications, including photoelectrochemistry and battery electrodes.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.1039-1046
• /
• 2008

The combining process of UV irradiation and H$_2$O$_2$ was used to investigate characteristics of cefaclor decomposition in the aquatic environment. The separate mixing tank was used to minimize the decreasing effective of contact area caused by sampling. Four baffles were installed inside the UV reactor for the complete mixing of the sample and outside of the reactor was wrapped with aluminum foil to protect the emission of photon energy. Production of OH radical was measured using pCBA(p-Chlorobenzoic acid) indirectly and rate constants were withdrawn pseudo-frist order reaction. Optimum condition for the maximum production of OH radical was found to be pH 3, hydrogen peroxide of 5 mmol/L and recirculation rate of 400 mL/min. Pseudo-frist order reaction rate constant was 0.1051 min$^{-1}$. In the optimum condition, cefaclor was completely decomposed within 40 min and rate constant was 0.093 min$^{-1}$. Decomposition by OH radical producted intermediate anions such as chloride, nitrate, sulfite and acetic acid and phenylglycine. After 6 hr most cefaclor was decomposed by UV/H$_2$O$_2$ process and converted to CO$_2$ and H$_2$O, resulting of operation in the decrease of TOC and acetic acid and the disappearance of phenylglycine.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.255-263
• /
• 2012

The stream has various environments and they are serving as main habitats of aquatic organisms. The distribution of phytoplankton is affected by water environment, especially pH, nitrogen and phosphorus. To reveal the relationship between phytoplankton distribution and water environment, we measured pH, $NO_3{^-}$ and $PO{_4}^{3-}$ concentration, and abundance of phytoplankton at 10 sites in the upper stream of Dorim-cheon. pH value ranged 5.05 to 7.56. $NO_3{^-}$ and $PO{_4}^{3-}$ concentrations ranged 0.4 ~ 4.9ppm and 0.02 ~ 0.99ppm, respectively. A point source of $NO_3{^-}$ was Seoul National University but concentration was not high and dropped to normal range at 400m downstream. $NO_3{^-}/PO{_4}^{3-}$ ratio ranged 28 to 152 except site 4 (0.4) where was affected by $PO{_4}^{3-}$ point source. Water pH, $NO_3{^-}$ and $PO{_4}^{3-}$ concentrations increased with downstream and were related to the input of irrigation water from Han-river between site 5 and 6. Bacillariophyceae alge dominated this stream. Phytoplankton density increased abruptly at downstream of site 5. In general, phytoplankton density did not increase until the $NO_3{^-}$ concentration of 3.5ppm and $PO{_4}^{3-}$ concentration of 0.07ppm. Phytoplankton density was low at sites where $NO_3{^-}/PO{_4}^{3-}$ ratio was larger than 50.

• Advances in Traditional Medicine
• /
• v.8 no.1
• /
• pp.39-46
• /
• 2008

In the Indian traditional medicine, Lippia nodiflora (Verbenaceae) whole plant is claimed to possess powerful diuretic activity. However, the diuretic potential of this plant is not yet investigated. The aim of this study was to evaluate the diuretic potential of methanol extract of Lippia nodiflora (MELN) in rats. Control (0.9% saline solution, 25 ml/kg, b.w) or urea (1 g/kg b.w) or frusemide (5 mg/kg b.w) and different concentrations of MELN (200 and 400 mg/kg b.w) were intraperitoneally administered (n = 6 per each treatment group) to hydrated rats and their urine output was monitored over a period of 5 h and 24 h after drug administration. The diuretic responses with its electrolyte excretion potency of the extract were highly remarkable in comparison with control animals. The extract at doses of 200 and 400 mg/kg shows a significant increase in volume of urine with increase in $Na^{+}$, $Ca^{2+}$ and $Cl^{-}$ excretion accompanied by the excretion of $K^{+}$ in dose dependent manner. This study suggests that the active component(s) in MELN had similar diuretic effect to that of frusemide. These results validate the traditional use of Lippia nodiflora as a diuretic agent.