• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.6
• /
• pp.303-313
• /
• 2022

The purpose of this study was to test and analyze the effects of the mechanical properties and structural changes of the austenitized and tempered martensite STS 410 stainless steel containing 11.5~13%Cr and 0.10%C on its temper embrittlement. The STS 410 stainless steel test pieces for each 3 hours at 960℃, 1000℃ and then, tempered them for 2 hours at 300℃, 350℃, 400℃, 450℃, 500℃, 550℃, 600℃, 650℃ and 700℃ known as the intervals vulnerable to temper embrittlement to observe the changes of their structures and mechanical properties. In case autenitizing was insufficient due to lower temperature of thermal treatment for solution, unsolved carbides and ferrites remained in the structure after quenching, which meant that the parts could wear out and corrode to embrittle at the room temperature. Elongation and impact energy changes with Tempering conditions showed minimum results in range of 400~500℃. The decrease in elongation and impact energy at 400~500℃ was the hardening effect of the subgrain due to the precipitation of many M₃C or M₇C₃, M₂₃C₆. And STS 410 stainless steel corrosion tested in 10% NaCl solution at 30℃ after tempering treatment. The degree of corrosion sensitization showed increasing tendency with increase of tempering temperature and Cr carbide precipitation were observed in grain boundary.

• KSBB Journal
• /
• v.5 no.1
• /
• pp.9-17
• /
• 1990

The growth and fermentation profiles of Clostridium acetobutylicum KCTC 1037 were examined in batch and continuous modes with pH variation and phosphate limitation. Clostridium acetobutylicum KCTC 10 37 grew better at pH 4.5 than at pH 5.5 or 6.5. Acetate and butyrate were produced at pH 5.5, whereas culture at pH 4.5 produced acetone and butanol. Solvent production was increased by the phosphate limitation in a batch culture, but in a phosphate-limited continuous culture for 400 hours steady-state solventogenesis was not observed. The induction and maintenance of solventogenesis presumably require not only acidic condition or phosphate limitation but also favourable bioenergetic condition.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.649-654
• /
• 2017

An activated carbon was prepared from waste citrus peel produced in large amounts in Jeju Island, Korea, using KOH activation and its characteristics was examined. Under the condition of the KOH ratio between 100 and 300%, activation temperature from 400 to $900^{\circ}C$ and activation time from 0.5 to 1.5 h, the iodine adsorptivity of the activated carbon prepared increased but the yield decreased with respect to the increase of each conditions. The iodine adsorptivity and yield of the activated carbon prepared at the activation time of more than 1.5 h were similar to those of using 1.5 h. In addition, as the KOH ratio increased, the specific surface area and pore volume of the activated carbon increased, but the pore diameter decreased. The activated carbon has an average pore diameter of $20{\sim}25{\AA}$. Also, the activated carbon prepared at 300% KOH and $900^{\circ}C$ for 1.5 h has the highest specific surface area of $1,527m^2/g$ and iodine adsorptivity of 1,246 mg/g.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.3
• /
• pp.13-17
• /
• 2017

We investigated the effect of self-assembled BSO nano-defects as pinning centers in BSO-added GdBCO films when the thicknesses of films were varied. 3.5 vol. % BSO-added GdBCO films with varying thicknesses from 200 nm to 1000 nm were deposited on $SrTiO_3$ (STO) substrate by using pulsed laser deposition (PLD) process. For the films with thicknesses of 400 nm and 600 nm, 'anomaly shoulders' in $J_c-H$ characteristic curves were observed near the matching field. The anomaly shoulders appeared in the field dependence of $J_c$ may be attributed to the existence of double pinning mechanisms in thin films. The fit to the pinning force density as a function of reduced field h ($H/H_{irr}$) using the Dew-Hughes' scaling law shows that both the 400 nm- and the 600 nm-thick films have double pinning mechanisms while the other films have a single pinning mechanism. These results indicate that the self-assembled property of BSO result in different role as pinning centers with different thickness.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.324-326
• /
• 1997

Low power ZnO-Si gas sensor below 500 mW at operating temperature has been fabricated by using micromachining technique. I-V measurement shows the power consumption of 260 mW at $400^{\circ}C$ The sensitivity of the sensor was 45 percent at operating temperature of $350^{\circ}C$(230 mW) with 1,000 ppm CO gas atmosphere. The response and the recovery time found out to be 94 sec and 180 sec, respectively, when CO gas was used. In order to measure the exact temperature of the gas sensing layer, Pt/Cr bilayer-RTD was used in this experiment.

• Fisheries and Aquatic Sciences
• /
• v.3 no.3_4
• /
• pp.188-194
• /
• 2000

A protease purified from hepatopancreas of shrimp, Penaeus japonicus, had maximum activity at $70^{\circ}C$ and in neutral and alkaline pH ranges. Specific activity at optimum reaction condition of the protease was estimated to be approximately 12 U/mg/min. The protease was stable in neutral and alkaline pH ranges and activity was retained after heat treatment at $50^{\circ}C$ for 30 min. Apparent $K_m$ and $V_{max}$ value against casein substrate were estimated to be $0.29\%$ and $7.8see^{-1}$, respectively, and those against N-CBZ-L-tyrosine p-nitropheny1 ester (CBZ­Tyr-NE) were 0.38 mM and $2,400 see^{-1}$, respectively. The N-termina1 sequence of the protease showed high homology to the trypsin from same species and the proteases from shrimp. Myosin heavy chain (MHC) from shrimp tail meat was the most susceptible to the protease and actin/tropomyosin were degraded progressively during 4 hr incubation, but to a lesser degree than MHC.

• Korean Journal of Plant Resources
• /
• v.34 no.5
• /
• pp.420-432
• /
• 2021

This study was conducted to evaluate antioxidant, antibacterial, anti-inflammatory, and digestive enzyme activity in water extract (SAW) and 60% ethanol extract (SAE) from Stachys sieboldii. As the treatment concentration of each extract S. sieboldii extract increased, antibacterial and antioxidant activity increased. The total polyphenol and total flavonoid contents of SAW were 106.25 ± 0.94 mgGAE/g, 24.4 ± 0.24 mgQE/g and SAE were 124.61 ± 1.11 mgGAE/g, 45.2 ± 3.52 mgQE/g, respectively. The 400 ㎍/mL of SAW and SAE performed more than 53% protective effects against oxidative stress in HepG2 cell lines. All extracts were not showed cytotoxicity to RAW 264.7 cell line at 100 ㎍/mL. NO production was reduced to 44.3 ± 1.4% for SAW and 45.1 ± 1.0% for SAE at a concentration of 100 ㎍/mL. The production of inflammatory cytokines each TNF-α, IL-1β, and IL-6 was inhibited in a concentration-dependent. S. sieboldii extract did not showed Caco-2 cells cytotoxicity and inhibited NO production in concentration-dependent. As the concentration of the S. sieboldii extract increased of α-amylase and protease enzymes activity, which are digestive enzyme. As a result of the experiment, it is judged that it can be used as basic data for the development of health food using S. sieboldii.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.425-433
• /
• 1993

Adsorptive stripping voltammetric determination method of trace zirconium using oxine as a ligand was studied. Optimal conditions found to be $2.5{\times}10^{-3}M$ borax buffer solution(pH 8.5) containing oxine concentration of $4{\times}10^{-8}M$. Accumulation potential was -0.2V, accumulation time was 400sec and scan rate was 4mV/sec. Calibration plots for zirconium are linear over the range of $1{\sim}100{\mu}g/L$ in optimal condition.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.88-93
• /
• 2011

The aerodynamic drag characteristics of HEMU-400X which has been being developed for the maximum speed of 430km/h were analyzed experimentally as the variations of the pantograph cover configurations to reduce the acoustic noise and the aerodynamic drag of the pantograph system. The wind tunnel tests were performed with three pantograph cover models upon 1/20 scaled 5-car model of HEMU-400X. Two kinds of wedge shapes which induce up-flow in the vicinity of the pantograph and one cone shape which reduces the whole train drag were used in order to compare the aerodynamic characteristics as the pantograph cover shape changes. The each axial force of 5 each car was measured at a time with the test velocities, 30, 40, 50, 60m/s. Through the wind tunnel test the base drag forces of HEMU-400x model and the forces by the pantograph cover on the train model were investigated and the aerodynamic drag characteristics of the train model by the pantograph cover configurations were analyzed.

• Microbiology and Biotechnology Letters
• /
• v.8 no.1
• /
• pp.9-18
• /
• 1980

During an extensive screening tests of yeasts for their RNA formation, it was found that Cryptococcus laurentii had especially high RNA content and high dry cell weight, when hydrolyzate of sliced and dried sweet potatoes was used as a carbon source. Growth conditions of this strain were examined, and the most desirable results were obtained at 48 hours of cultivation on a reciprocal shaker at 3$0^{\circ}C$ with initial pH 6.0. Under the above conditions, the RNA content and yield of dry cells were investigated using various media compositions. Ammonium sulfate 0.40%, peptone 0.6 ％, and yeast extract 0.4% were appeared to be favorable as a nitrogen sources. The optimum concentrations of K $H_2$P $O_4$, M $n^{++}$, C $O^{++}$ were 0.05 ％, 0.1 ％, and 0.001 ％, respectively. Ca-pantothenate, 400$\mu\textrm{g}$/$m\ell$, showed relatively favorable effects as a growth factor. The maximum RNA content obtained in this study was 16.8 ％ of the total dry cell weight.t.t.