• 한국광학회지
• /
• 제14권6호
• /
• pp.600-605
• /
• 2003

Radio-over-Fiber(RoF) 시스템에서 직접 광스위칭 CDMA(Direct Optical Switching CDMA : DOS-CDMA) 기법을 이용하여 기존 이동통신에서 연구되어왔던 수 ㎓ 대역보다 주파수가 훨씬 높은 40 ㎓ 대역의 MMW (millimeter wave)를 반송파로 사용한 차세대 이동통신을 위한 MMW DOS-CDMA 시스템 연구를 실험적으로 수행했다. 부호 분할 다중화에 사용된 직교 부호(orthogonal codes)는 단극성(unipolar) 형태의 상호상관이 2이하(crosscorrelation$\leq$2)인 부호열을 선택했으며, 부호 길이(code length)는 16 chips, 칩율(chip rate)은 2.5 Gchip/sec 였다. 광원은 10 ㎓ 광섬유 링 레이저를 유리고조모드 잠김시켜 진폭 균등화한 40 ㎓ 의 안정된 레이저 펄스를 발생시켜 사용하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.291-292
• /
• 2008

We fabricated 40Gbps electroabsorption modulator-integrated DFB lasers (EMLs). Adopting traveling-wave (TW) electrode and tilted facet improved high-frequency characteristics of EMLs. The 3dB bandwidth of E/O response for TW-EML was as large as 34 GHz, as compared with 27 GHz for lumped EML. Tilted facet formed by dry etching processes successfully reduced the optical feedback and the resonance in E/O response decreased to as small as 2.8 dB.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1572-1579
• /
• 2009

In this dissertation ultra-broadband power amplifier(UPA) was designed and fabricated using negative feedback technique. UPA was made of pre-amplifier, drive amplifier and power amplifier. Negative feedback technique was used to achieve ultra-broadband performance. Designed power amplifier has 30dB gain and 2W output power. The load-pull data of power amplifier for optimal power matching was extracted from the measured S-parameter. Fabricated PCB material, permittivity is 4.6 and thickness is 0.8mm, is FR4 and UPA was fabricated 3 modules for comparison of the simulated and measured results. Size of the fabricated pre-amplifier and drive amplifier module is 40mm'50mm'16mm. And from the experimental results, gain of the pre-amplifier module is 9.87dB at 2GHz and flatness is 0.63dB. Experimental result of the drive amplifier module is 10.97dB at 2GHz and flatness of that is 0.26dB. Test result of the power amplifier module is 10.71dB at 2GHz and flatness is 0.72dB. Total size of the power amplifier is 45mm'134mm'16mm. According to the test results, gain of the UPA is 28.98dB at 2GHz and flatness is 1.68dB. Output power was 32.098dBm at 2GHz, 32.154dBm at 1GHz and 31.273dBm at 100MHz.

• ETRI Journal
• /
• 제39권5호
• /
• pp.737-745
• /
• 2017

A 6-GHz-to-18-GHz monolithic nonuniform distributed power amplifier has been designed using the load modulation of increased series gate capacitance. This amplifier was implemented using a $0.25-{\mu}m$ AlGaN/GaN HEMT process on a SiC substrate. With the proposed load modulation, we enhanced the amplifier's simulated performance by 4.8 dB in output power, and by 13.1% in power-added efficiency (PAE) at the upper limit of the bandwidth, compared with an amplifier with uniform gate coupling capacitors. Under the pulse-mode condition of a $100-{\mu}s$ pulse period and a 10% duty cycle, the fabricated power amplifier showed a saturated output power of 39.5 dBm (9 W) to 40.4 dBm (11 W) with an associated PAE of 17% to 22%, and input/output return losses of more than 10 dB within 6 GHz to 18 GHz.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.549-554
• /
• 2003

본 논문에서 단거리전용통신을 위한 차량탑재장치내의 수신단 전반부의 구성부품인 5.8GHz대역 LNA를 MMIC로 설계 및 구현하였다. 설계된 LNA는 두개의 능동소자와 매칭회로, 두개의 드레인 바이어스 회로로 구성되며, 3V의 단일공급전압에서 18mA의 소비전류로 동작한다. 중심주파수 5.8GHz에서 이득 13.4dB, NF 1.94dB, Input IP3-3dBm, S/sub 11/ - l8dB, S/sub 22/ - 13.3dB의 특성을 나타내며, 제작된 회로의 실제 크기는 1.2×0.7㎟ 이다.

• 천문학회지
• /
• 제38권2호
• /
• pp.97-100
• /
• 2005

The first Space-VLBI project, VSOP, started successfully with the launch of the dedicated space-VLBI satellite HALCA in 1997. The project has been in scientific operation in the 1.6 GHz and 5 GHz bands, and studies have been done mainly of the jet phenomena related to active galactic nuclei. A second generation space- VLBI project, VSOP-2, has been planned by the working group formed at ISAS/JAXA with many collaborators. The spacecraft is planned to observe in the 8, 22 and 43 GHz bands with cooled receivers for the two higher bands, and with a maximum angular resolution at 43 GHz (7 mm) of about 40 micro-arcseconds. The VSOP-2 satellite will also have the capability of the phase-reference and full polarization observations, which will produce more powerful results than those of the VSOP project. Far-future space-VLBI projects following VSOP and VSOP-2, have a large potential to achieve enough resolution and sensitivity to satisfy astronomers in future.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.415-418
• /
• 2007

This paper presents the design and analysis of LNA-Mixer for 2.45GHz RFID reader. The LNA is implemented by PCSNIM method for low power consumption. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique, and the resonating technique for the tail capacitance. The connection between the two designed circuits is made by active balun. This LNA-Mixer has about 35dB for -40dBm input RF power, LO power is 0dBm and RF frequency is 2.45 GHz and IIP3 is -4dBm. The layout of LNA-Mixer for one-chip design in a $0.18-{\mu}m$ TSMC process has 2.6mm ${\times}$ 1.3mm size.

• 한국정보통신학회논문지
• /
• 제5권1호
• /
• pp.34-40
• /
• 2001

WRC-2000에서 지상망과 정지궤도(GSO)를 이용한 위성통신 및 방송으로 분배된 Ku(14/11GHz) 및 Ka(30/20GHz)대역의 일부를 비정지궤도(non-GSO) 위성시스템과 공유하여 사용키로 결정함에 따라, 비정지궤도 위성시스템과 기존 정지궤도 위성망간 주파수대역의 공유문제, 간섭기준 및 간섭영향 평가 등에 관한 연구의 필요성이 제기되어 본 논문에서는 우리나라 위성망의 등가전력속밀도를 계산하기 위해 네 가지 분석방법을 사용하였다.

• ETRI Journal
• /
• 제33권6호
• /
• pp.981-984
• /
• 2011

A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T-shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi-circle stepped-impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3-dB cutoff frequency at 2.37 GHz and a 40-dB rejection at 2.44 GHz. The stopband with an attenuation level better than -13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.204-207
• /
• 2000

In this paper, we have studied the effect of doped with B-Bi-Zn on properties (microstructure, density, shrinkage, permeability as a function of frequency, etc.) of hexagonal-ferrite for high frequency chip-inductor material about several GHz. The permeability were analyzed by impedance analyzer(100 kHz~40 MHz) and network analyzer(30 MHz~3 GHZ). As a result of the characteristics, the B-Bi-Zn glass ceramic was used to lower the sintering temperature for additive as a function of frequency from 100 kHz to 1.8 GHz showed constant tends. The maximum imaginary value of complex permeability was observed near the resonance frequency of 2 GHz.