• International Area Studies Review
• /
• v.15 no.1
• /
• pp.585-602
• /
• 2011

This study is to investigate the long run convergence behavior of the housing rent of Korean 21 cities, by using the Phillips and Sul (2007)'s newly developed panel convergence test method. The empirical result shows that the 21 Korean cities nationwide converge in four different groups according to the level of convergence. The 1st group is composed of 3 Seoul metropolitan cities, the 2nd group is composed of Bucheon, the 3rd group is composed of 10 cities such as Busan, Daegu, etc, and the 4th group is composed of 7 cities including Jeonju and Mokpo etc. About the speed of convergence among the member cities within the group, the 1st group has the highest speed and next the 4th group, followed by the 2nd group, and finally the 3rd group. The fact that the member cities of the 1st group with the highest rent level and the 4th group with the lowest rent level converges rapidly means the polarization of rent between the two groups. Finally, this paper suggests policy implications to relax the widening gap of individual income between the higher and the lower rent convergent groups.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.222-235
• /
• 1997

On the basis of the seven species of fish caught by fishing boats with one crewmen belonging to the Iwawada Fisheries Cooperative of Chiba Prefecture, the fishing boats were classified by species with high market values, and the results obtained were reclassified by discriminant function. As a result, the fishing boats were classified into six groups. These six groups are : G1 featuring the main catches of yellowtails ; G2 flounders ; G3 skipjack tunas, G4 squids ; G5 demersal fish, and G6 other miscellaneous species. Furthermore, principal component analysis were carried out on fish catches of the seven species in terms of the value obtained from a catch from the scores of the first, second, third and fourth principal components. The results of analysis show that fishing boats with one crewman can be broadly classified into three groups ; i.e., Groups G1/G2, Groups G3/G4/G5 and Group G6.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.449-455
• /
• 2012

Purpose: This study was found the risk factors of cataract by gender in elder and older Korean adults. Methods: We investigated the data for 5,024 (men 2,163 people, women 2,861 people) people, aged 40-95 years, from the Korean National Health and Nutrition Examination Survey. We divided into two groups (group 1: 40-64 years, group 2: 65-94 years). We divided into two groups (group 1: 40-64 years, group 2: 65-94 years). Cataract was decided in case of at least one eye with lens opacity. We presented significant odds ratio (OR) increase of cataract according to the obesity and socioeconomic information including house income and education level after adjusting for diabetes, hypertension, high triglyceride, outside active, smoking and drinking habits in two groups with distinction of sex. Results: House income (or education) was strongly related to the prevalence of agerelated cataract in all groups. In models adjusting for all other related factors, cataract patients with lower income and education had a higher prevalence of cataract (group1: OR, 1.84[1.17-2.91], OR, 3.00[1.90-4.74], group 2: OR, 3.47[2.53-4.74], OR, 7.44[5.41-10.23] for men. In comparison, for women, cataract patients with lower income, lower education and obesity had a higher prevalence of cataract (group1: OR, 1.72[1.14-2.60], OR, 4.48[2.72-7.38], OR, 1.40[1.10-1.82], group 2: OR, 2.32[1.70-3.16], OR, 29.99[20.31-44.28], OR, 1.27[1.04-1.54]). Conclusions: Factors of low socioeconomic status were associated with age-related cataract in Korean. Obesity-cataract association was stronger in women.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5326-5336
• /
• 2012

Most middle and high school students in Korea use internet for gaming and recreation. This study aimed to classify middle and high school students according to amount of time they spend playing games and analyze relationship domestic factors. Weekday game times and environmental factors of the adolescents in Korea. The group with average game time of 30 min, 0:30-1:30 hours, 1:30-3:00 hours, over 4:00 hours. Subjects in this study were 6,487 middle and high school students. For the category "thoughts about game characters", the group with average game time of 1:30~3:00 hours replied "not at all" but the group with average game time of over 4:00 hours replied "sometimes", which was significantly different from the previous group. Similarly, for the category "lack of time for homework", the group with average game time of 1:30~3:00 hours replied "not at all", which significantly differed from the "sometimes" response from the group with average game time. For satisfaction with interest, "average" was the most frequent response from all the groups. Analyzing correlation of factors influencing game addiction in subjects with game time showed that factors related to game addiction diagnosis and academic performance were especially different in the group with average game time of over 4:00 hours compared to other groups. Nowadays internet has taken a large and significant part of our life such that a life without internet is hard to imagine, and our dependency on internet has risen at the same time. Accordingly, education on appropriate utilization and correct usage of internet to youths who lack self-control and judgment is very needed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.38-43
• /
• 2012

Purpose: Patients injected with FDG use the bathroom that Measured surface contamination level and spatial dose rate. This study about the effect that result affects workers in same part. Materials and Methods: Group1 is St. Vincent' s hospital's 60case. Group 2 is Bucheon St. Mary's hospital's 50case. Last case is lower the average daily number of patients than group 2. Measured time is 8:00, 10:00, 13:00, 15:00 and 17:00. Measured part is 4 point of toilet, basin and wastepaper basket, also measured accumulation dose of toilet during 3 month. Hospitals is installed PET/CT ware surveyed on presence of bathroom that used only by patient and worker has been using the bathroom. Results: The highest average surface contamination level of toilet is group1($8.38{\pm}4.56$), but the highest spatial dose rate is group3. Cumulative exposure dose measured by TLD during 3months is St.Vincent's hospital 0.78 mSv and Bucheon St.Mary's hospital 0.37 mSv. And result of survey is 16.12% worker using the bathroom. Conclusions: The more daily number of patient, the higher surface contamination level of bathroom. Especially, wastepaper basket's surface contamination level is exceed the reference value $4Bq/cm^2$. Based on This survey, Bathroom require special attention and proper decontamination.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.236-245
• /
• 1997

On the basis of the seven species of fish caught by fishing boats with two crewmen belonging to the Iwawada Fisheries Cooperative of Chiba Prefecture, the fishing boats were classified by species withhigh market values, and the results obtainedwere reclassified by discriminant function. As a result, the fishing boats were classified into four groups. These four groups are : G1 featuring themain catchesof yellowtailsand skipjack/tunas ; G2 yellowtails and squids ; G3 squids and skipjack/tunas, and G4 octopus and other miscellaneous specles. Furthermore, principal component analysis were carried out on fish catches of the seven species in terms of the value obtained from a catch from the scores of the first, second and third principal components. The results of analysis show that Groups G1, G2 and G3 assume identical fishing form, while only Group G4 asumes a different fishing form.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

양식 산업에 있어 사육 생물의 빠른 성장은 가장 요구되는 특성이다. 특히, 선발육종을 통한 성장 개선은 사료의 효율적 이용과 연관되어 있으며, 균형 잡힌 단백질 대사 등을 통해 이루어진다. 대부분의 경골어류는 단백질 대사의 마지막 부산물로 암모니아를 생성하여 배설하며, 이를 통한 사료 내 단백질의 효율적 이용성을 비교하는 척도로 제시되어 왔다(Ming, 1985). 따라서 본 실험에서는 한국해양연구원에서 선발육종 해 온 참돔과 일본 양식산 참돔 및 이들의 교배 자손들을 대상으로 일간 먹이 공급, 절식 그리고 1회 만복 공급에 따른 암모니아성 질소 배설률을 조사하였으며, 일간 먹이 공급에 따른 각 교배 자손들의 분 배출 특성을 알아보았다. 실험어는 일본 양식산인 JPN 교배구 자손과 한국해양연구원 선발육종산인 KORDI F4 교배구 자손, 그리고 JPN$\times$KORDI F4♂ 교배구 자손을 대상으로 실시하였다. 체중이 각각 17.1$\pm$0.1 g (JPN 교배구; 그룹 1), 17.7$\pm$0.1 g (JPN♀$\times$KORDI F4♂; 그룹 2), 21.5$\pm$0.1 g (KORDI F4; 그룹 3)인 참돔 치어를 각각 15마리씩 3반복 수용하여 실험에 이용하였다. 실험어는 지름이 33 cm이고 높이가 34 cm인 둥근 투명 플라스틱 수조에 수용하고 분 수집기인 TUF column (passing effluent water through a special test tube) system을 이용 어체중의 3%에 해당하는 사료 량을 일간 세 번에 나누어 동일량을, 09시부터 17시까지 4시간 간격으로 공급한 14일째에 일간 먹이 공급에 따른 24시간 동안의 참돔 종간 잡종 치어의 총암모니아성 질소(total ammonia nitrogen, TAN) 배설률 및 분 배출률을 조사하였다. 이 조사가 끝난 후 3일간 절식시킨 다음 내인성 암모니아성 질소 배설을 조사하였으며, 이어서 1회 만복 사료 공급한 다음 이에 따른 암모니아성 질소 배설 경향을 알아보았다. 일간 먹이 공급에 따른 각 실험구의 암모니아 배설은 세 가지 계통 참돔치어 모두 먹이 섭취 후 암모니아 배설로 인한 TAN 농도가 지속적으로 증가하는 경향을 보였으며, 시간당 TAN 배설률을 적분한 결과, 그룹 1과 2 그리고 3의 일간 TAN 배설률은 각각 637.3$\pm$36.5 mg/kg fish/day, 684.3$\pm$18.5 mg/kg fish/day 그리고 772.8$\pm$17.3 mg/kg fish/day로 나타나 그룹 3의 일간 TAN 배설률이 가장 높은 결과를 보였다. 3일간 절식 후 그룹 1, 2, 그리고 2의 TAN 배설률은 각각 8.08~14.15 mg/kg fish/hr, 6.50~12.20 mg/kg fish/hr, 그리고 6.67~8.60 mg/kg fish/hr의 범위를 보여 거의 일정한 농도로 나타났다. 시간당 TAN 배설률을 적분한 결과, 그룹 1, 2 그리고 3의 일간 TAN 배설률은 각각 286.9$\pm$28.3 mg/kg fish/day, 215.7$\pm$5.5 mg/kg fish/day 그리고 179.3$\pm$7,7 mg/kg fish/day로 나타나 먹이 공급과는 달리 내인성 TAN 배설의 경우 그룹 1의 배설률이 가장 높은 결과를 보였다. 1회 만복 먹이 공급에 따른 TAN 배설 경향은 그룹 1과 2의 TAN 배설률은 먹이 공급 6시간 후 가장 높은 값인 44.19$\pm$2.90 mg/kg fish/hr와 41.70$\pm$1.40 mg/kg fish/hr을 보였고, 그룹 3에서는 4시간 후에 가장 높은 값인 31.23$\pm$1.39 mg/kg fish/day로 나타났다. 일간 먹이 공급에 따른 각 실험구의 총 분 배출량은 그룹 1의 경우 총 분 배출량은 2.17$\pm$0.1 g/kg fish와 91.15$\pm$4.53 g/kg feed로 나타났고, 그룹 2에서는 2.26$\pm$0.14 g/kg fish와 95.02$\pm$3.18 g/kg feed, 그룹 3에서는 2.81$\pm$0.73 g/kg fish와 132.85$\pm$34.0 g/kg feed로 나타나 유의적인 차이는 보이지 않았으나(P>0.05), 그룹 3의 배출 비율이 높은 것으로 나타났다. 시간 경과에 따른 분 배출 비율은 그룹 1의 경우 먹이 공급 24시간 후 총 분의 60.6%를 보여 반면, 그룹 2와 3에서는 각각 67.8%와 77.8%를 보여 그룹 1이 다른 그룹에 비해 분 배출 비율이 낮은 것으로 나타났다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.501-506
• /
• 2022

Echogenic liposome contains both liquid and gas inside the shell. In ultrasound mediated drug delivery, sonoporation, these new microbubbles can be an attractive drug carrier since they can be loaded water soluble drugs and drug molecules can be unloaded at the specific location with ultrasound sonication. In this paper, the structure of the echogenic liposome was confirmed with EF-TEM and the positive effect of sonoporation with echogenic liposome was comparatively evaluated on MDA-MB-231 cells which is a type of breast cancer cell with Doxorubicin. Control group (Group 1), Doxorubicin only (Group 2), sonoporation with Doxorubicin and hollow microbubbles (Group 3), sonoporation with Doxorubicin loaded echogenic liposome (Group 4) were classified and experiments were conducted. According to the results, Group 4 is at least 1.4 times better in inducing necrosis of cancer cells. Therefore, we conclude echogenic liposome could be one of the most useful form of microbubbles in sonoporation.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.319-336
• /
• 2020

The purpose of this study was to compare the outcomes of two interventional methods, overlapping drug-eluting stents (DES) and long DES, for long-term clinical outcomes in patients with acute myocardial infarction (AMI). A total of 438 patients with AMI (65.9±11.0 years, 306 males) from June 2008 to March 2019 who had diffuse long coronary artery lesion, more than 30mm were divided into two groups; group I (overlapped DES group; n=140) and group II (long DES group; n=298). We compared the incidences of major adverse cardiac events [MACEs; cardiac death, myocardial infaction (MI), target lesion revascularization (TLR) and stent thrombosis (ST)] during 12 months between the two groups. Everolimus-eluting stent was more commonly used in group II than in group I (28.1% vs. 51.8% p<0.001). Mean lesion diameter was slightly longer in group II (3.1±0.3mm vs. 3.2±0.3mm, p=0.042), and prevalence of ACC/AHA lesion type C was higher in group I (41.7% vs. 25.4%, p<0.001). Incidences of MACEs during 12 months were higher in group I than group II (18.5% vs. 14.4%, p=0.034). The rates of cardiac death (2.1% vs. 4.4%, p=0.667), MI (5.0% vs. 2.7%, p=0.260) and stent thrombosis rate (0.7% vs. 1.7%, p=0.669) were similar between the two groups. However, TLR rate was higher in group I (10.7% vs. 5.6%, p=0.041). In multivariate logistic regression analysis, presence of diabetes mellitus [Hazard ratio (HR) 2.383, 95% confidence interval (CI) 1.332-4.260, p=0.003] and use of paclitaxel-eluting stent (HR) 2.367, 95% CI 1.371-4.086, p=0.002) were independent predictors of 12-month MACEs, without significant differences in prevalence between the two groups. In AMI patients with diffuse long lesion, TLR rate was higher in the overlapped DES group during 12-month follow-up. Presence of diabetes and use of paclitaxel-eluting stent were independent predictors of MACEs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.406-415
• /
• 2009

Purpose: The purpose of this study was to compare the marginal fitness and fracture load of the zirconia copings according to the design with different thickness and coloration. Material and methods: The evaluation was based on 80 zirconia copings. Zirconia copings were fabricated in design with different thicknesses using CAD/CAM system (Everset, KAVO dental GmbH, Biberach, Germany). The designs of copings were divided into four groups. The first group consisted of copings with uniform thickness of 0.3 mm. The thickness in the second group was 0.3 mm on the buccal surface and 0.6 mm on the lingual surface. The third group consisted of coping with uniform thickness of 0.6 mm. The thickness in the fourth group was 0.6 mm on the buccal surface and 1mm on the lingual surface. Each group consisted of 10 colored and 10 uncolored copings. Half of the copings (40) processed with a milling system according to the specific design were sent to be given a color (A3) through saturation in special dye by a manufacturing company. Just after sintering, the marginal discrepancies of copings were measured on the buccal, lingual, mesial and distal surfaces of metal die, under a Video Microscope System (sv-35, Sometech, Seoul, Korea) at a magnification of $\times$ 100. It was remeasured after the adjusting of the inner surface. Next, all copings were luted to the metal dies using reinforced cement {GC FujiCEM (GC Corp. Tokyo, Japan)} and mounted on the testing jig in a Universal Testing Machine (Instron 4467, Norwood, MA, USA). The results were analyzed statistically using the one-way ANOVA test. Results: The obtained results were as follow: 1. The measured value of marginal discrepancy right after sintering was the greatest in the contraction of the buccal area in all groups, except for group I2. 2. There was no significant difference of marginal fitness among the groups in the colored zirconia group (P<.05). 3. When the marginal fitness among the groups in the uncolored zirconia group was considered, group II2 had the smallest marginal discrepancy. 4. When the colored and uncolored groups with the same design were compared, there was a significant difference between I1 and II1 groups. In group 2, 3, and 4, the uncolored zirconia had the greatest marginal fitness (P<.05). 5. After adjustment of inner surface, there was no significant difference in the marginal fitness in all groups when color and design of the zirconia coping were compared. 6. The fracture load of CAD/CAM zirconia copings showed significant difference in group 1, 2, 3, and 4. I4 and II4 had the strongest fracture load. 7. When groups with different color and same design were compared, all colored groups showed greater fracture load (P>.05), with no significance. Conclusion: There was difference in the marginal fitness according to the design and coloration of zirconia copings right after sintering, but it was decided that the copings may well be used clinically if the inner surface are adjusted. The copings should be thick enough for the reinforcement of fracture strength. But considering the esthetics of the visible surfaces (labial and buccal surface), the thickness of copings may be a little thin, without giving any significant effect on the fracture strength. This type of design may be considered when giving priority to preservation of tooth or esthetics.