• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.77-85
• /
• 1999

By assuming a linearly graded depletion edge approximation in the intrinsic MOS region and by taking into account the mobility variation dependent on both lateral and vertical fields, a physics-based analytical model for a short-channel(n-channel) MOSFET is suggested. Derived expressions for the threshold voltage and the drain current of typical MOSFET is structures could be used in a unified manner for all operating range. The threshold voltage was calculated by changing following variables : channel length, drain-source voltage, source-substrate voltage, p-substrate doping level, and oxide thickness. It is shown that the threshold voltage decreases almost exponentially as the channel length decreases. In addition, the short-channel threshold voltage roll-off, the channel length modulation and the electron mobility degradation can be derived within a satisfactory accuracy.

• Fashion & Textile Research Journal
• /
• v.6 no.4
• /
• pp.433-439
• /
• 2004

Hanji costumes has four aspects that allow the creator or artist to create many variations. The pictorial effects of Hanji costumes are produced through variations in the dyes and brushes used for its application. The amount of water and texture of the Hanji mixture also influences the Hanji clothing. This effect was expressed using a dry brush technique, a dripping technique, India inks, and fragments from other Hanji works. A second aspect of Hanji clothing is the coloring effect in the Hanji costumes. The coloring is due to the fibers in the preparation mixture and the uniqueness of the dyes. The Hanji clothing was dyed various colors and patterns by dip dyeing, block dyeing, silk screens, digital printing. The third aspect of Hanji imagination in clothing is the decorative details. The details in Hanji clothing can be seen using frills, pleats, tucks and ribbons. The last variation of Hanji clothing can be expressed through crafting techniques. These techniques are the quality of paper string, cuts in the paper and paste ingredients. With Hanji cloth, it is possible to plait, roll, and crample into other flexible & useful materials.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.19-23
• /
• 2005

To minimize the weld defect in manufacturing of the welded tube by using $CO_2$ laser, the monitoring of the welding quality and the seam tracking along the butt-joint lengthwise to the tube axis are studied. The longitudinal butt-joint is shaped from $60kgf/mm^2$ grade steel sheet by 2 roll bending method, and welded by the $CO_2$ laser welding system equipped with the seam tracker and plasma sensor. The laser welded tube has the thickness of 1.5mm, diameter of 105.4mm and length of 2000mm. The precise positioning of the laser beam on the butt-joint to be assembled is obtained within $200{\mu}m$ by the laser vision sensor. The artificial defects in the butt-joint are well observed by the signal of plasma intensity measured from the plasma sensor of UV wavelength range within 400nm. The developed $CO_2$ laser tube welding system has the function of the precision seam tracking and the real-time monitoring of the welding quality. In conclusion, the laser welded tube can be used for manufacturing of automobile chassis and components after hydro-forming.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.65-70
• /
• 2020

While the demand for robots in the manufacturing industry has dramatically increased, the industrial robots' functionality is mainly determined by the effector attached to the end of their arms. They need a flexible gripping system that can act as a human hand and easily grasp a variety of objects, which requires resilient sensors. This study clarifies the electrical output characteristics of elastic tactile sensors according to contact terminals because the output characteristics of the tactile sensors vary greatly, depending on the contact material and the method of contact with the conductive wire. Our research considers the Three Roll Mill and Paste Mixer as the dispersion medium, and a nickel- and gold-plated brass electrode as the contact terminal.

• Laser Solutions
• /
• v.17 no.4
• /
• pp.20-23
• /
• 2014

In printed electronics, printing rolls are used to transfer electronic ink onto a flexible substrate. Generally printing rolls are patterned in microscale by the indirect laser method. Since based on the wet etch process, the indirect method is neither environment-friendly nor suitable for making a printing roll with patterns narrower than $20{\mu}m$. In this paper, we have directly engraved micro-patterns into a Zn-coated metal specimens using a picosecond laser in order both to engrave $10{\mu}m$-wide patterns and to improve the pattern profile. Experiments showed that it is possible to engrave $10{\mu}m$-wide patterns with an a rectangular-shaped profile which is necessary for the dimensionally accurate printing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.9-14
• /
• 2004

This paper reports the measurement and analysis of the short channel effects and the punchthrough voltage of SOI-MOSFET with a self-aligned ground plane electrode in the silicon mechanical substrate underneath the buried oxide. When the channel length is reduced below 0.2${\mu}{\textrm}{m}$ it is observed that the threshold voltage roll-off and the subthreshold swing with channel length are reduced and DIBL is improved more significantly in GP-SOI devices than FD-SOI devices. It is also observed from the dependence of threshold voltage with substrate biases that the body factor is a higher in GP-SOI devices than FD-SOI devices. From the measurement results of punchthrough voltage, GP-SOI devices show the higher punchthrough voltages than FD-SOI devices

• Journal of Ship and Ocean Technology
• /
• v.10 no.3
• /
• pp.36-48
• /
• 2006

The train ferry, accommodating trains roll on and off, is often called as 'Railway on the Sea' or 'Blue High-way' since she can connect the railways or roads segregated by the sea and improve the accessibility and continuity of land transport systems. The ferry is especially appropriate to the intermodal transport routes mostly passing through the land but have relatively short sea segment. As the train ferry can considerably reduce the cost and time for cargo handling and modal shift and unnecessitates excessive initial investment on infrastructures such as large harbor cranes or vast container yards, introduction of train Ro-Ro ferries lessen the total transport cost for door-to-door transportation with full exploitation of the existing railway system. All the ports placed in Shandong, Liaoning and Jiangsu provinces of China are connected to the hinterlands via well developed railway and road systems. Therefore, realization of the Incheon-Yantai train ferry system will link Korea railways to TCR and the 4,131-kilometer-long Longhai-Lanxin Railway, along the famous Eurasian Continental Bridge. In the present paper, the Incheon-Yantai train ferry will be introduced as a good example of an efficient multimodal short sea shipping system for Northeast Asia.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.40-46
• /
• 2004

The magnetic properties of sputtered ($Ni_{83}Fe_{17}/Au/Co/Au$) multilayers with various thicknesses of Au (0.5 {\leq} t_{Au} {\leq} 3 nm), Ni-Fe ($1{\leq}t_{Ni-Fe}{\leq}4nm$) and Co ($0.2{\leq}t_{co}{\leq}1.5nm$) layers were characterized. An alternating in-plane and out-of-plane anisotropy of the ferromagnetic layers was achieved for the structures ($t_{Au}{\geq}1.5nm$) showing a weak coupling between the Ni-Fe layers with an in-plane anisotropy and the Co layers ($0.3{\leq}t_Co{\leq}1.2nm$) with a perpendicular anisotropy. For such a structure, a detailed discussion on the GMR effect is presented, relating to the magnetization reversal from a mutually perpendicular magnetic configuration at the remanence to a parallel one at the saturation. An influence of the dense labyrinth domain structure on the magnetoresistance effect is also addressed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.2
• /
• pp.245-252
• /
• 1978

In order to obtain some information for solvent dyeing, polyethylene terephthalate (PET) was treated with water, tetrachloroethylene yarn (TCE), and water/TCE emulsion for three hours at the temperatures from $40^{\circ}$ to $140^{\circ}C$. The change of fine structure of substratum by measuring the shrinkage, the degree of crystallinity, the stress relacxation modulus and Young's modulus. The P.E.T. film was also treated in water (at $140^{\circ}C$) for 4 hours to stabilize the substratum. By means of film roll cyliderical method, the Disperse Blue 27 was diffused. Then, calculated the diffusion coefficient and examined the application of WLF equation. However, the temperature dependence of the shrinkage could be explain with WLF equation, the diffusion coefficient couldn't be applied the WLF equation when the substratum was stabilized. From the result, the effects on shrinkage were in the order of water

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.114-129
• /
• 2006

This purpose of this study is to research on the influence on the creation of young generation's street fashion of pop stars focused on pop music given the fact that fashion can be created by popular culture in this multi-media era. Also, this study is to provide useful data for the activation of the creation of young fashion culture and the fashion industry through pop stars' fashion. The pop stars' fashion that has affected young street fashion is as follows : Elvis Presley's rock'n'roll style, Beatles' mods style, Janis Joplin's hippy style, Sex Pistols's punk style, Madonna's boy-toy and corset style, Michael Jackson's androgynous style, Puff Daddy and L.L Cool J's hip-hop style, Bob Marley's reggae style, Spice Girls, Jennifer Lopez and Britney Spears's sexy style. The young street fashion culture of pop stars and its industrial meaning withdrawn from the above are as follows : Creation of a fashion icon, Creation of anti-fashion, Liberation of a sex role, Costume play culture, Activation of the young fashion industry through star marketing.