• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.622-628
• /
• 2009

A proper walking pattern is to be assigned for a walk of multi-legged robots. For the purpose of identifying a good walking pattern for multi-legged robots, this paper consider a simple model of quadruped robotic walking and analyze its walking balance based on the centroid of foot polygons formed in every step. A performance index to estimate the walking balance is also proposed. Simulation studies show that the centroid trajectory of foot polygons and the walking balance in a common quadruped walking are different according to the walking pattern employed. Based on the walking balance index and a bio-mimetic aspect, a useful walking pattern for quadruped robots is finally addressed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1146-1154
• /
• 2008

This paper presents a method for the acceleration analysis of multi-legged walking robots in consideration of the frictional ground contact. This method is based on both unified dynamic equation for finding the acceleration of a robot's body and constraint equation for satisfying no-slip condition. After the dynamic equation representing relationship between actuator torques and body acceleration, is derived from the force and acceleration relationship between foot and body's gravity center, the constraint equation is formulated to reconfigure the maximum torque boundaries satisfying no-slip condition from given original actuator torque boundaries. From application of the reconfigured torques to the dynamic equation, interested acceleration boundaries are obtained. The approach based on above two equations, is adapted to the changes of degree-of-freedoms of legs as well as friction of ground. And the method provides the maximum translational and rotational acceleration boundaries of body's center that are achievable in every direction without occurring slipping at the contact points or saturating all actuators. Given the torque limits in infinite normsense, the resultant accelerations are derived as a polytope. From the proposed method, we obtained achievable acceleration boundaries of 4-legged and 6-legged walking robot system successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.63-68
• /
• 1987

In this study, a pantograph leg of the four legged walking vehicle is analysed with regard to mechanical energy consumption. Energy efficiency of the vehicle is estimated in terms of specific resistance varying body height, stride length and walking speed. The interaction between specific resistance and the parameters is investigated.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.278-284
• /
• 2019

Legged locomotion has high mobility on irregular surfaces by touching the ground at discrete points. Inspired by the creature's legged locomotion, legged robots have been developed to explore unstructured environments. In this paper, we propose a modular crawler that can easily adjust the number of legs for adapting the environment that the robot should move. One module has a pair of legs, so the number of legs can be adjusted by changing the number of modules. All legs are driven by a single driving motor for simple and compact design, so the driving axle of each module is connected by the universal joint. Universal joints between modules enable the body flexion for steering or overcoming higher obstacles. A prototype of crawler with three modules is built and the driving performance and the effect of module lifting on the ability to overcome obstacles are demonstrated by the experiments.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.500-507
• /
• 2022

In this study, a motion planning method based on the integer representation of contact status between wheels and the ground is proposed for planning swing motion of a 6×6 wheel-legged robot to cross large obstacles and gaps. Wheel-legged robots can drive on a flat road by wheels and overcome large obstacles by legs. Autonomously crossing large obstacles requires the robot to perform complex motion planning of multi-contacts and wheel-rolling at the same time. The lift-off and touch-down status of wheels and the trajectories of legs should be carefully planned to avoid collision between the robot body and the obstacle. To address this issue, we propose a planning method for swing motion of robot legs. It combines an integer representation of discrete contact status and a trajectory optimization based on the direct collocation method, which results in a mixed-integer nonlinear programming (MINLP) problem. The planned motion is used to control the joint angles of the articulated legs. The proposed method is verified by the MuJoCo simulation and shows that over 95% and 83% success rate when the height of vertical obstacles and the length of gaps are equal to or less than 1.68 times of the wheel radius and 1.44 times of the wheel diameter, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2012

This study deals with the operation effectiveness of roundabout. The objective of this study was to analyze the operational effectiveness of roundabout based on the operation of pedestrian signal. For pursuing the above, VISSIM was as a traffic simulation program. this study gives particular attention to analyzing the 1,680 scenarios by operation of Pedestrian Signal(7 cases), roundabout type(2 cases), pedestrian volume(8 cases) and entering volume(15 cases). The main results analyzed are as follows. First, the operational effectiveness analyzed by 2 type of 4-legged 1-lane roundabout and 6 type of 4-legged 2-lane were evaluated to be better than that by the others type. Second, the average delay time analyzed by operation of pedestrian signal were evaluated to be less than that by unsignalized pedestrian crossing. Finally, the average delay time analyzed by pedestrian crossing were decreased 8.18% than that by staggered pedestrian crossing in 4-legged 1-lane. However, the average delay time analyzed by staggered pedestrian crossing were evaluated to be decreased 36.53% than that by pedestrian crossing in 4-legged 2-lane.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.146-154
• /
• 1991

As the application of robotic systems expand its scope, more research efforts are given in providing mobility to the robotic systems so that they can travel across various paths including those with formidable obstacles such as stairways or rough terrains. Legged locomotion is mainly concerned because the walking motion, like that of animal behavior, has many advantages over wheel type or track type locomotion especially in rough terrain. Walking robot, in general, having a discrete number of legs, have inherently low static stability. Static stability can be increased to a certain degree, by improving walking method, but it has many limitations such as reduced travel speed. A very promising possibility lies in the use of balancing weight, nevertheless its actual implementation is very rare. In this study, a 4-legged walking machine is developed and the static stability margin is increased with the balancing weight. In the future, this robot will be used to take an experiment on the walking in mush terrain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.490-496
• /
• 1995

A four-legged mobile robot can move on the plain terrain with mobility and stability, but if there exist any obstacles on the terrain of the motion direction, it takes extra times for a mobile robot to cross those obstacles and the stability should be considered during motion. The main objevtive is the study of a quadruped which can cross obstacles with better mobility, stability and fuel economy than any other wheeled or tracked vehicles. Vertical step, isolated wall and ditch are the basic obstacles and by understanding those three cases perfectly, a quadruped can move on any mixed rough terrain as 4-legged animal moves. Each leg of a determine the crossing capability in a static analysis. A quadruped can be simplified with links and joints. By applying the research method, a quadruped can determine the control procedures as soon as it receives the terrain informations from scanner and finally can be moved as animals move with mobility and stability.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.152-162
• /
• 1996

A four-legged Walking Machine can move on the plain terrain with mobility and stability and stability, but if there exist any obstacles on the terrain of the motion direction, it takes extra time to cross those obstacles and the stability should be considered during motion. The main objective is the study a Quadruped which can cross obstacles with better mobility, stability and fuel economy than any other wheeled or tracked vehicles. Vertical step, isolated wall and ditch are the basic obstacles and by understanding those three cases perfectly, a Quadruped can move on any mixed rough terrain as 4-legged terrestrial vertebrates move. Each leg of a Quadruped has a limited walk space called a walking volume and this is very important to deter- mine the crossing capability in a static analysis. A Quadruped can be simplified with links and joints. By applying the research method, a quadruped can determine the control procedures as soon as it receives the terrain information from scanner and finally can move with mobility and stability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1964-1972
• /
• 2009

This paper proposed a distributed web environment for developing robot services using a 4-legged robot and MSRS. The proposed development environment of the robot services enabled a high-level complicated robot application to operate in a distributed web environment by implementing robot functions as services which can be run on network nodes using Microsoft MSRS. The environment has been also implemented using a 4-legged robot, Genibo as a robot platform. In experiment, we showed the developed robot services are enable to be executed and configured dynamically and support a remote monitoring in a distributed web environment. Finally the feasibility and the effectiveness of the proposed environment has been verified by creating a robot application using the developed robot services in Visual Program Language which helps student to create a complicated robot application system easily.