• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.107-115
• /
• 2014

The reduced-bit transform based bit-plane matching algorithm (BPM) can obtain the block matching result through its simple calculation and hardware design compared to the conventional block matching algorithms (BMAs), but the block matching accuracy of BPMs is somewhat low. In this paper, reduced-bit transform based sum of the absolute difference (R-SAD) is proposed to improve the block matching accuracy in comparison with the conventional BPMs and it is shown that the matching process can be obtained using the logical operations. Firstly, this method transforms the current and the reference images into their respective 2-bit images and then a truth table is obtained from the relation between input and output 2-bit images. Next, a truth table is simplified by Karnaugh map and the absolute difference is calculated by using simple logical operations. Finally, the simulation results show that the proposed R-SAD can obtain higher accuracy in block matching results compared to the conventional BPMs through the PSNR analysis in the motion compensation experiments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.51-51
• /
• 2001

본 논문에서는 CMOS 로직과 pass-transistor logic(PTL)의 장점만을 가진 새로운 복합모드로직(Compound Mode Logic)을 제안하였다. 제안된 로직은 VLSI설계에서 중요하게 부각되고 있는 저전력, 고속 동작이 가능하며 실제로 전가산기를 설계하여 측정 한 결과 복합모드 로직의 power-delay 곱은 일반적인 CMOS로직에 비해 약 22% 개선되었다 제안한 복합모드 로직을 이용하여 고성능 32×32-bit 곱셈기를 설계 제작하였다. 본 논문의 곱셈기는 개선된 사인선택(Sign Select) Booth 인코더, 4-2 및 9-2 압축기로 구성된 데이터 압축 블록, 그리고 carry 생성 블록을 분리한 64-bit 조건 합 가산기로 구성되어 있다. 0.6um 1-poly 3-metal CMOS 공정을 이용하여 제작된 32×32-bit 곱셈기는 28,732개의 트랜지스터와 1.59×l.68 ㎜2의 면적을 가졌다. 측정 결과 32×32-bit 곱셈기의 곱셈시간은 9.8㎱ 이었으며, 3.3V 전원 전압에서 186㎽의 전력 소모를 하였다.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.781-783
• /
• 2000

1bit full adder have 3 input (including carry_in) and 2 outputs(Sum and Carry_out). Because of 1 bit full adder's propagation delay. We usually use 4-bit binary full adder with fast carry, 74LS283. The 74LS283 is positive logic circuit chip. But the logic function of binary adder is symmetrical, so it can be possible to use it not only positive logic but also the negative logic. This thesis use symmetrical property. such as $C_{i+1}(\bar{a_i}\bar{b_i}\bar{c_i})=C_{i+1}{\bar}(a_i,\;b_i,\;c_i)$ and $S_i(\bar{a_i}\bar{b_i}\bar{c_i})=\bar{S_i}(a_i,\;b_i,\;c_i)$. And prove this property with logic operation. Using these property, the 74LS283 adder is possile as the negation logic circuit. It's very useful to use the chip in negative logic. because many system chip is negative logic circuit. for example when we have negative logic chip with 74LS283. we don't need any not gate for 74LS283 input, and just use output of adder(74LS283) as the negation of original output.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.498-504
• /
• 2009

A high-performance low-complexity decoding algorithm for LDPC codes is proposed in this paper, which has the advantages of both bit-flipping (BF) algorithm and sum-product algorithm (SPA). The proposed soft bit-flipping algorithm requires only simple comparison and addition operations for computing the messages between bit and check nodes, and the amount of those operations is also small. By increasing the utilization ratio of the computed messages and by adopting nonuniform quantization, the signal-to-noise ratio (SNR) gap to the SPA is reduced to 0.4dB at the frame error rate of 10-4 with only 5-bit assignment for quantization. LDPC codes with high column or row weights, which are not suitable for the SPA decoding due to the complexity, can be practically implemented without much worsening the error performance.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.25-28
• /
• 2002

This paper presents variable bit rate(VBR) rate control scheme based on MPEG-4 VM8 rate control scheme. An initial Q searching method provides more accurate bit allocation for the first frame. A frame skipping and RD Model update scheme when coded frame quality is too low or high prevents image quality fluctuation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.83-90
• /
• 2004

In this paper, we proposed a new instruction set(X32Y ISA) with 3 different types of instruction mode. The proposed instruction set organizes 32-bit, 24-bit, 16-bit instruction in order to solves a problem of memory size limitation in an embedded microprocessor. We designed a 32-bit 5 stage pipeline RISC microprocessor based on the X32V ISA. To verify the proposed the X32V ISA and a microprocessor, we estimated a program code size of multimedia application programs using a X32V simulator. In result, we verified that the Light mode and the Ultra Light mode obtains 8%, 27% reduction of a program code size through comparison with the Default mode. The proposed microprocessor was verified all X32V instructions execution at Xilinx FPGA with 33MHz operating frequency,

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.337-342
• /
• 2010

In this paper, a new architecture for digit-parallel/bit-serial GF($2^m$) multiplier with low complexity is proposed. The proposed multiplier operates in polynomial basis of GF($2^m$) and produces multiplication results at a rate of one per D clock cycles, where D is the selected digit size. The digit-parallel/bit-serial multiplier is faster than bit-serial ones but with lower area complexity than bit-parallel ones. The most significant feature of the digit-parallel/bit-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But the traditional digit-parallel/bit-serial multiplier needs extra hardware for high speed. In this paper a new low complexity efficient digit-parallel/bit-serial multiplier is presented.

• ETRI Journal
• /
• v.45 no.4
• /
• pp.615-626
• /
• 2023

Under limited transmission conditions, many factors affect the efficiency of video transmission. During the flight of an unmanned aerial vehicle (UAV), frequent network switching often occurs, and the channel transmission condition changes rapidly, resulting in low-video transmission efficiency. This paper presents an efficient video coding flow for UAVs working in the 5G nonstandalone network and proposes two bit controllers, including time and spatial bit controllers, in the flow. When the environment fluctuates significantly, the time bit controller adjusts the depth of the recursive codec to reduce the error propagation caused by excessive network inference. The spatial bit controller combines the spatial bit mask with the channel quality multiplier to adjust the bit allocation in space to allocate resources better and improve the efficiency of information carrying. In the spatial bit controller, a flexible mini graph is proposed to compute the channel quality multiplier. In this study, two bit controllers with end-to-end codec were combined, thereby constructing an efficient video coding flow. Many experiments have been performed in various environments. Concerning the multi-scale structural similarity index and peak signal-to-noise ratio, the performance of the coding flow is close to that of H.265 in the low bits per pixel area. With an increase in bits per pixel, the saturation bottleneck of the coding flow is at the same level as that of H.264.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.647-656
• /
• 2011

Motion estimation using one-bit transform and two-bit transform reduces the complexity for computation of matching error; however, the peak signal-to-noise ratio (PSNR) is degraded. Modified 1BT (M1BT) and modified 2BT (M2BT) have been proposed to compensate degraded PSNR by adding conditional local search. However, these algorithms require many additional search points in fast moving sequences with a block size of $16{\times}16$. This paper provides more efficient search method by preparing candidate blocks using the number of non-matching points (NNMP) than the conditional local search. With this NNMP-based search, we can easily obtain candidate blocks with small NNMP and efficiently search final motion vector. Experimental results show that the proposed algorithm not only reduces computational complexity, but also improves PSNR on average compared with conventional search algorithm used in M1BT, M2BT and AM2BT.