• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.319-332
• /
• 2013

The purpose of this study was to investigate the design comparison of totally prefabricated bridge substructure system. Prefabricated bridge substructure systems are a relatively new and versatile alternative in substructure design that can offer numerous benefits. The system can reduce the work load at a construction site and can result in shorter construction periods. The prefabricated bridge substructures are designed by the methods of Korea Highway Bridge Code (KHBD) and load and resistance factor design (AASHTO-LRFD). For the design, the KHBD with DB-24 and DL-24 live loads is used. This study evaluates the design method of KHBD (2005) and AASHTO-LRFD (2007) for totally prefabricated bridge substructure systems. The computer program, reinforced concrete analysis in higher evaluation system technology was used for the analysis of reinforced concrete structures. A bonded tendon element is used based on the finite element method, and can represent the interaction between the tendon and concrete of a prestressed concrete member. A joint element is used in order to predict the inelastic behaviors of segmental joints. This study documents the design comparison of totally prefabricated bridge substructure and presents conclusions and design recommendations based on the analytical findings.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.544-556
• /
• 1997

All ceramic restorations except In-Ceram Alumina system gave a good esthetics and an exellent marginal fidelity. The flexural strength of them had about 150MPa, so the indication is only single crown. By using In-ceram Alumina System(450Mpa), it is thought to be possible to construct bridge for its high flexural strength. But the prognosis is unclear, The purposes of this study are to clear short term prognosis of In-Ceram bridge restorations, to elucidate its clinical significance. Among 22 In-Ceram Bridge restored in our department, 11 In-Ceram bridges with follow up were used. The period of placement is from 1 to 18 months. The results were as follows : 1. Among follow up 11 bridges, 2 bridges were fractured. One is 4 unit in maxillary lateral incisors, the other is 3 unit bridge in maxillary canine and premolar. Including 11 bridge without follow up, failure rate is very low(2/22). 2. The fracture sites are connector areas between abutment and pontic. To maintain In-Ceram bridge for long term period, it is needed to remove the nonphysiologic occlusal force and to have sufficient thickness of alumina core. For estabilishing clinical use of In-Ceram bridges, it is thought to need clinical research during long term period.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.209-217
• /
• 2002

The effects on structures caused by the replacement of the bridge bearings are investigated in this study. The bearings of the bridge are seriously deteriorated because of the breakage of lower concrete and the corrosion of the bearing itself. Also, the negative reaction states are created at some bearings on the abutment. Then, the bridge has occurred excessive vibrations and severe noise and impact whenever heavy trucks pass the above joints. The existing bearings are replaced using the adjustable bearing. The height of the bearings is adjusted to minimize the level difference of above joint and also to induce the appropriate distribution of live loads The effects of replacing the bearings are investigated by measuring the behaviors of the bridge without and with replacing works. The results without replacing the bearing show that the distribution of displacements and stresses is distorted in comparison with the analytical results. Also the bridge without replacing the bearing shows that the impact and vibration from the heavy trucks are larger than those with replacing the bearing. Load carrying capacity of the bridge increase about 1.8 times through replacing the bearing. The above results show that the structural performance of the bridge is improved by replacing only bridge bearings.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.253-258
• /
• 2022

Objective: This study aimed to determine the effect of internal abdominis pressure(normal, hollowing and bracing) on trunk muscle activity during one leg bridge exercise. Design: Cross-sectional study. Methods: Thirteen healthy adults (9 men and 4 women) were instructed to perform Internal abdominal pressure(IAP) control(Normal, Hollowing, Bracing) during one leg bridge. Electromyography (EMG) data (% Maximum Voluntary Isometric Contraction, MVIC) were recorded three times on both sides of the participant's Internal Oblique(IO), Effector Spinae(ES), and Multifidus(MF) muscles and the average value was analyzed. Results: As a result, Abdominal bracing one leg bridge (BOLB) group and Abdominal hollowing one leg bridge (HOLB) group showed significantly increased muscle activation of bilateral internal oblique, erector spinae and multifidus activation compared to the Normal one leg bridge (NOLB) group (p<0.05). Abdominal hollowing one leg bridge (HOLB) group had a significant difference in bilateral Internal oblique muscle activation in compared to the NOLB group (p<0.05). Conclusions: Bilateral internal oblique, erector spinae, and multifidus muscles activation in healthy adults at one leg bridge exercise showed greater activation at abdominal bracing. Therefore, in this study, IAP control can be used as an indicator of choice to the dysfunction with trunk muscle weakness and corrective exercise subject's situation when the goal is to activate the trunk muscles by performing one leg bridge.

• Wind and Structures
• /
• 제36권1호
• /
• pp.1-14
• /
• 2023

To evaluate the wind shielding effect of bridge towers with multiple limbs on high-speed trains, a wind tunnel test was conducted to investigate the aerodynamic characteristics of vehicles traversing multi-limb towers, which represented a combination of the steady aerodynamic coefficient of the vehicle-bridge system and wind environment around the tower. Subsequently, the analysis model of wind-vehicle-bridge (WVB) system considering the additional moments caused by lift and drag forces under nonuniform wind was proposed, and the reliability and accuracy of the proposed model of WVB system were verified using another model. Finally, the factors influencing the wind shielding effect of multi-limb towers were analyzed. The results indicate that the wind speed distributions along the span exhibit two sudden changes, and the wind speed generally decreases with increasing wind direction angle. The pitching and yawing accelerations of vehicles under nonuniform wind loads significantly increase due to the additional pitching and yawing moments. The sudden change values of the lateral and yawing accelerations caused by the wind shielding effect of multi-limb tower are 0.43 m/s² and 0.11 rad/s² within 0.4 s, respectively. The results indicate that the wind shielding effect of a multi-limb tower is the controlling factor in WVB systems.

• 대한토목학회논문집
• /
• 제38권4호
• /
• pp.505-516
• /
• 2018

교량 유지관리 전략 수립 시 현재 상태를 기반으로 미래 상태를 예측할 수 있어야 하며, 상태예측모델의 신뢰도가 높아질수록 효과적인 유지관리 의사결정이 가능하다. 그러나 인력기반 반복 주기적인 현행유지관리는 관리자가 목표하는 관리(등급)수준의 교량 상태를 정확히 예측하지 못해서 막대한 보수 보강비용이 발생될 가능성이 있고, 합리적인 유지관리 의사결정을 도모하는데 어려움을 겪는다. 이에 따라 본 논문에서는 국내 교량 점검 이력 데이터를 이용하여 불확실성을 고려한 교량 부재별 대표 상태예측모델을 개발하고, 개발된 상태예측모델을 실제 유지관리 대상 교량에 보다 높은 정확도로 적용 가능한 베이지안 업데이트 기법을 제안하였다. 또한, 모니터링 업데이트 상태예측모델 기반 예방적 유지관리가 기존 현행유지관리 대비 비용 효율성 측면에서 유리함을 제안하기 위해 각각의 유지관리비용 산출에 따른 교량 점검 타당성 분석을 수행하였다.

• 한국강구조학회 논문집
• /
• 제13권3호
• /
• pp.313-325
• /
• 2001

14TON 밴 형식의 트럭에 대응할 수 있는 튜브형 트라이빔 교량난감을 제안하였다. 이 교량난간은 합성형 지주에 연결된 튜브형 트라이빔과 철재 가드빔으로 구성되어 있는데, 튜브형 트라이빔은 다양한 범퍼 높이를 갖는 차량에 대응할 수 있고 기존의 교량 난간에 비해서 교량난간의 시종점부와 가드레일 사이를 보다 완벽하게연결할 수 있는 장점이 있다. 가드레일 지주로 사용되는 것과 동일한크기의 철재 파이프에 콘크리트를 충전한 합성형지주가 단순히 철재 파이프의 크기를 키운 것보다 강성 및 극한강도를 증대시키는데 효율적임을 확인하였다. 개발된 시스템에 대하여 $14Ton-80km/h-15Y^{\circ}$의 충돌조건으로 실차 충돌실험을 실시하였는데 NCHRP Report 350의 실험레벨 4의 평가항목을 모두 만족하였다. 컴퓨터 시뮬레이션을 통하여 이 시스템이 국내의 S2 등급으로 분류될 수 있음을 보여주었다.

• Coupled systems mechanics
• /
• 제7권4호
• /
• pp.485-507
• /
• 2018

The moving load causes the occurrence of vibrations in civil engineering structures such as bridges, railway lines, bridge cranes and others. A novel engineering method for separation of the variables in the differential equation of the elastic line of Bernoulli-Euler beam has been developed. The method can be utilized in engineering structures, leading to "a beam under moving load model" with generalized boundary conditions. This method has been implemented for analytical study of the dynamic response of the metal structure of a single girder bridge crane due to the telpher movement along the bridge girder. The modeled system includes: a crane bridge girder; a telpher, moving with a constant horizontal velocity; a load, elastically fixed to the telpher. The forced vibrations with their own frequencies and with a forced frequency, due to the telpher movement, have been analyzed. The loading resulting from the telpher uniform movement along the bridge girder is cyclical, which is a prerequisite for nucleation and propagation of fatigue cracks. The concept of "dynamic coefficient" has been introduced, which is defined as a ratio of the dynamic deflection of the bridge girder due to forced vibrations, to the static one. This ratio has been compared with the known from the literature empirical dynamic coefficient, which is due to the telpher track unevenness. The introduced dynamic coefficient shows larger values and has to be taken into account for engineering calculations of the bridge crane metal structure. In order to verify the degree of approximation, the obtained results have been compared with FEM outcomes. An additional comparison has been made with the exact solution, proposed by Timoshenko, for the case of simply supported beam subjected to a moving force. The comparisons show a good agreement.

• Earthquakes and Structures
• /
• 제7권4호
• /
• pp.511-525
• /
• 2014

The main object of this study is to determine and compare the structural behavior of base isolated long span highway bridge, $G\ddot{u}lburnu$ Highway Bridge, using single concave friction pendulum (SCFP) and triple concave friction pendulum (TCFP). The bridge is seismically isolated in the design phase to increase the main period and reduce the horizontal forces with moments using SCFP bearings. In the content of the paper, firstly three dimensional finite element model (FEM) of the bridge is constituted using project drawings by SAP2000 software. The dynamic characteristics such as natural frequencies and periods, and the structural response such as displacements, axial forces, shear forces and torsional moments are attained from the modal and dynamic analyses. After, FEM of the bridge is updated using TCFP and the analyses are performed. At the end of the study, the dynamic characteristics and internal forces are compared with each other to extract the TCFP effect. To emphasize the base isolation effect, the non-isolated structural analysis results are added to graphics. The predominant frequencies of bridge non-isolated, isolated with SCFP and isolated with TCFP conditions decreased from 0.849Hz to 0.497Hz and 0.338Hz, respectively. The maximum vertical displacements are obtained as 57cm, 54cm and 44cm for non-isolated, isolated with SCFP and isolated with TCFP conditions, respectively. The maximum vertical displacement reduction between isolated with TCFP bearing and isolated with SCFP bearing bridge is %23. Maximum axial forces are obtained as 60619kN, 18728kN and 7382kN, maximum shear forces are obtained as 23408kN, 17913kN and 16249kN and maximum torsional moments are obtained as 24020kNm, 7619kNm and 3840kNm for non-isolated, isolated with SCFP and isolated with TCFP conditions, respectively.

• Physical Therapy Rehabilitation Science
• /
• 제4권1호
• /
• pp.11-16
• /
• 2015

Objective: Prone bridge exercise is one of the core strengthening exercise for improving abdominal, lower and upper extremity muscles. In addition, coactivation of the trunk muscles and extremities is important for treatment of low back pain. This study aimed to investigate the correlation between the thickness, cross-sectional area of the target muscle, and endurance during prone bridge exercise. Our hypothesis was that an increase in muscle thickness is positively related to the hold time for the static prone bridge exercise. Design: Cross-sectional study. Methods: Fourteen healthy university students (8 men and 6 women) voluntarily participated in the study at Sahmyook University. Hold time for the prone bridge with one and both legs was measured. The resting and contracted thickness of the lateral abdominal, rectus femoris, and triceps muscles was measured using rehabilitative ultrasound imaging. The correlation between muscle thickness and endurance for maintenance time was evaluated. Results: The prone bridge with both legs and the contraction thickness of the triceps muscle showed a positive correlation (r=0.692, p<0.05); the prone bridge with one leg and the contraction thickness of the internal oblique and transversus abdominis muscles showed a positive correlation (r=0.545, 0.574, p<0.05, 0.05, respectively). Conclusions: Endurance for the prone bridge exercise with a stable support surface is correlated with the contraction thickness of arm muscles; the prone bridge exercise with an unstable support surface is correlated with the contraction thickness of the deep abdominal muscles.