• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.161-171
• /
• 1994

Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.79-87
• /
• 2001

In this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of the engine exhaustive valve (SUH3-SUH35 dissimilar steels of 12.3mm, 16mm, 20mm, and 24mm in diameters) were performed, comparing with the other FRW matches of materials such as SUH3 to SUH31, STS303 and SUH3 to STS304. As an important result, the techniques for dissimilar friction welding optimization of engine heat resisting steels SUH3 and SUH35 (12.3mm, 16mm, 20mm, and 24mm) and its real-time weld quality evaluation by AE was developed, considering on both diameter and carbon equivalent effects.

• The Journal of the Korean dental association
• /
• v.14 no.6
• /
• pp.539-542
• /
• 1976

저자는 한국인 부착치은의 폭경을 측정하기 위하여 건전한 치은 및 치주조직을 가진 10명의 남자를 대상으로, 기능적인 방법과 조직화학적인 방법을 이용하여 부착치은 경계부인 Mucogingival Junction에서부터 Marginal gingva의 Crrest까지를 측정하였다. 이때 측정된 부위로, 상, 하악 공히 우측 제일대구치 원심면 Papilla로부터 시작하여 좌측 제일대구치 원심면 Pailla까지 각각 25개 부위로 구분하여 모두 50개 부위를 측정 하였다. 따라서 상기한 방법에 의한 측정을 토대로 다음과 같은 결과를 얻었다. 1. 기능적인 방법을 이용하여 측정한 측정치는 조직화학적인 방법에 의한 측정치보다 약 0.30~0.80mm의 높은 수치로 나타났다. 2. 측정치중 가장 높은 폭경을 나타내는 부착치은의 부위는 상악측절치 근심면(9.03~8.84mm 기능적인 방법, 8.49~8.12mm 조직화학적인 방법)이며, 가장 적은 측정치를 나타낸 부위는 하악제일소구치 Cervical부위이다. (3.87~3.70기능적인 방법, 2.82~2.77mm 조직화학적 방법). 3. Frenum 부착부위 치은폭경은 상악 6.27~6.56mm, 하악 6.95~6.07mm 4. 부착치은 폭경 중 가장 측정키 어려운 하악 제 1대구치 cervical부위는 4.17~3.82mm기능적인 방법, 3.86~3.49mm조직화학적인 방법

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.223-232
• /
• 2012

The purpose of this study was to investigate the effect of various thickness of porcelain on shear bond strength between metal coping and porcelain. So, various thickness of feldspathic porcelain and heat-pressed porcelain were built up and compared. 120 metal cube($4{\times}4{\times}4mm$) specimens were prepared. 60 specimens were applied to feldspathic porcelain and the others were applied to heat-pressed porcelain by 1mm, 1.5mm, 2mm, 2.5mm, 3mm and 3.5mm thickness. The measurement of shear bond strength was performed by Instron universal testing machine. The following results were obtained from this study. 1. As thickness of feldspathic porcelain increases, shear bond strength has decreased. Feldspathic specimens with 1mm porcelain thickness were significantly stronger than other feldspathic subgroups. 2. There was no significant difference of shear bond strength according to porcelain thickness in heat-pressed porcelain group. 3. In comparison between subgroups with same thickness, feldspathic porcelain group had stronger shear bond strength than heat-pressed porcelain. There were significant difference between 1mm and 3mm porcelain thickness group. 4. In almost cases, fracture surface was found on both metal and porcelain surfaces. As thickness of porcelain was increased, metal exposure was decreased.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.533-540
• /
• 1999

We observed that the thick outer bark layer of Quercus variabilis hindered oak longicorn beetle (Moechotypa diphysis) from laying its eggs in inner bark (secondary phloem tissues). The outer bark thickness of Q. variabilis was average of 7.4mm, while those of Q. mongolica. Q. serrata and Q. acutissima were average of 1.1mm, 1.3mm and 2.0mm, respectively. Inner bark thickness was 4.8mm in Q. acutissima and 3.6-3.9mm in the other oak species. The outer shape of ovipositional holes on the bark by the longicorn beetle was $8-12mm{\times}6-8mm$ wide oval in Q. variabilis, whereas $5-9mm{\times}1-5mm$ narrow fusiform in the other oak species. Oak longicorn beetle drilled average of three ovipositional holes per a 1.2m-long log in a few Q. variabilis logs and its ovipositional rate was 15%. Compared to this, the longicorn beetle preferred Q. mongolica. All the 32 investigated logs of this oak species were drilled to have 20 ovipositional holes per a log and ovipositional rate was 56%. One third of the eggs laid already hatched in early June to damage the inner bark. It seems that oak longicorn beetle prefers oak species with smooth, thin and stable outer bark surface.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.2
• /
• pp.197-206
• /
• 2021

microRNA-361-3p (miR-361-3p) is involved in the carcinogenesis of oral cancer and pancreatic catheter adenocarcinoma, and has anti-carcinogenic effects on non-small cell lung cancer (NSCLC). However, its effect on multiple myeloma (MM) is less reported. Here, we found that upregulating the expression of miR-361-3p inhibited MM cell viability and promoted MM apoptosis. We measured expressions of tumor necrosis factor receptor-associated factor 6 (TRAF6) and miR-361-3p in MM cells and detected the viability, colony formation rate, and apoptosis of MM cells. In addition, we measured expressions of apoptosis-related genes Bcl-2, Bax, and Cleaved caspase-3 (C caspase-3). The binding site between miR-361-3p and TRAF6 was predicted by TargetScan. Our results showed that miR-361-3p was low expressed in the plasma of MM patients and cell lines, while its overexpression inhibited viability and colony formation of MM cells and increased the cell apoptosis. Furthermore, TRAF6, which was predicted to be a target gene of miR-361-3p, was high-expressed in the plasma of patients and cell lines with MM. Rescue experiments demonstrated that the effect of TRAF6 on MM cells was opposite to that of miR-361-3p. Upregulation of miR-361-3p induced apoptosis and inhibited the proliferation of MM cells through targeting TRAF6, suggesting that miR-361-3p might be a potential target for MM therapy.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.1
• /
• pp.41-49
• /
• 2010

Return flow rate of irrigation water was estimated by water balance method. Daepyeong pumping district to irrigate 75.8 ha of rice paddy in the Geum river basin was selected to install gauging instruments to collect data such as weather, water levels, infiltration rate and evapotranspiration during irrigation season (May 27 to Sept. 20) in 2003 and 2004. Irrigation and drainage discharge were calculated from the rating curve and evapotranspiration was estimated both by the modified Penman formula and by the lysimeter. The results were as followed : 1. Total amounts of pumping water during irrigation season were $1,076,000\;m^3$ in 2003 and $1,848,000\;m^3$ in 2004. Total amounts of rainfall were 1336.0mm and 1003.0mm respectively during the irrigation season in 2003 and 2004. 2. It was surveyed that the amount of infiltration was 196.5 mm (2.2 mm/day). The gauged evapotranspiration was 311.0 mm (3.5 mm/day) and the calculated evapotranspiration was 346.0 mm (3.9 mm/day) during irrigation period in 2003. It was surveyed that the amount of infiltration was 169.9 mm (2.4 mm/day). The amount of gauged evapotranspiration was 377.3 mm (5.3 mm/day) and the calculated evapotranspiration was 454.5 mm (6.6 mm/day) during irrigation period in 2004. 3. The rates of quick and delayed return flow were 52.4 % and 17.7 % respectively, and so return flow rate was 70.1 % in 2003. The rates of quick and delayed return flow were 45.4 % and 16.1 % respectively, and so return flow rate was 61.5 % in 2004. It means that average return flow rate in the Daepyeong pumping district was assumed to be 65 %.

• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.77-80
• /
• 2000

This study was carried out to investigate infection process, symptoms and $LD_{50}$ values of the entomopathogenic fungus cordyceps, Paecillomyces japonica, on the domestic silkworm, Bombyx mori. Susceptibility of infection in the silkworms by cordyceps, Paecillomyces japonica, was 100% in $10^{7}$ block, 96% in $10^{6}$ block, 76% in $10^{5}$ block, 44% in $10^{4}$ block, 28% in $10^{3}$ block and 8% in $10^{2}$ block. Cordyceps, Paecillomyces japonica, was highly infectious to the silkworms. A pathogenicities of cordyceps, Paecillomyces japonica, may be highly virulent because of the low resistance or high susceptibility of the silkworms. Dosage of the pathogen of $LD_{50}$ was $3.78{\times}10^{3}\;spores/mm^{3}$.

• The Journal of Korean Physical Therapy
• /
• v.18 no.5
• /
• pp.13-23
• /
• 2006

Purpose: This study was to investigate two-point discrimination(TPD) and related factors in rural community residents. Methods: The sample consisted of 68 people who have been living in rural community in June 2005 studied. TPD was measured from the tips of the thumb, index, middle, ring, and little finger of each hand with the TPD esthesiometer. The research was designed to be a cross-sectional measured study. SAS statistical software was used for the analysis. The characteristics of the study sample were described by mean and standard deviation(SD) for continuous variables and by frequency and percentage for categorical variables. The Student's t-test and analysis of variance (ANOVA) were used to compare TPD in gender and diabetes mellitus. A Pearson's correlation analysis was conducted for relationship among values of 5 fingers. Multiple regression analysis was performed to determine the factors associated with TPD. Results: A total of 68 residents were measured, their average $age{\pm}SD$ was $54.2{\pm}23.2$ years(range: $12{\sim}88\;yr$). The mean TPD for 5 fingers tips in dominated side was 4.76mm(thumb 3.98mm, index 4.22mm, middle 4.79mm, ring 5.17mm, and little finger 5.65mm, respectively). 4.91mm for thumb finger of women was significantly higher than 3.54mm that of men's in difference between gender(p=.01l4), also women(4.39mm) was higher than men(3.71mm) in median nerver area(p=.0318). There was a statistically significant difference in age(p=.0022), which were under age of 20(3.36mm), 30 years(3.61mm), 40 years(5.38mm), 50 years(4.84mm), 60 years(5.28mm), 70 years(5.18mm), and over age of 80(5.29mm). Factors related to TPD of fiver fingers by multiple regressions were gender(${\beta}=.03$, p=.0001). Conclusions: Taken together, gender and age were significantly associated with TPD. We recommend that further research should measure TPD by using larger sample sizes and more sensitive measurement instruments.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.567-577
• /
• 1996

탈회냉동건조골 (DFDBA)과 ePTFE막을 사용한 경우와 ePTFE만을 사용한 경우의 조직유도 재생술의 효과를 관찰하였다 . 12명의 환자에서 12개의 골내낭결손부(한 환자당 하나의 결손부)를 통상적인 치주수술 시행한 경우를 대조군(GFS)으로 , 12명의 환자에서 12개의 결손부는 ePTFE(GTR)막 만으로 , 또 다른 환자의 12개결손부는 ePTFE+DFDBA로 시행하였다. 창상안정과 감염방지를 강조한 술후계획이 사용되었다. 술후 6개월째 임상적 치유상태를 평가 하였다. 대조군에서 치주낭깊이, 부착수준, 탐침골깊이, 치은퇴축의 각각의 평균치는 $3.4{\pm}1.3mm$, $2.0{\pm}1.2mm$, $1.3{\pm}2.0mm$, $-1.7{\pm}0.8mm$, GTR 군에서는 $4.3{\pm}l.3mm$, $3.1{\pm}1.5mm$, $4.2{\pm}2.2mm$, $-11{\pm}1.4mm$ 그리고 GTR+DFDBA 군에서는 $3.4{\pm}2.1mm$, $2.4{\pm}1.9mm$, $2.6{\pm}1.6mm$, $-1.2{\pm}1.7mm$를 보였다. 대조군과 GTR+DFDBA 군의 술전 평균 치주낭깊이는 각각 $6.9{\pm}1.1$, $7.4{\pm}1.2$, $7.0{\pm}2.0mm$였다. GTR, GTR+DFDBA군에서는 뚜렸한 치주낭감소와 부착획득을 보였다(P<0.01). GTR, GTR+DFDBA 에서는 대조군에 비해 탐침골수준의 뚜렷한 향상을 보였으나(P<0.001), GTR 과 GTR+DFDBA 사이에는 뚜렷한 차이가 없었다. 이 실험결과로 골내낭 결손부에서 GTR과 GTR+DFDBA의 사용은 골형성을 제외한 임상결과 에서 대조군과 유사한 결과를 보였다.