• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.281-291
• /
• 2021

PURPOSE. To evaluate the wear of computer-aided design/computer-aided manufacturing (CAD-CAM) dental ceramic materials opposed by enamel as a function of increased chewing forces. MATERIALS AND METHODS. The enamel cusps of healthy human third molar teeth (n = 40) opposed by materials from CAD-CAM dental ceramic groups (n = 10), including Vita Enamic^® (ENA), a polymer-infiltrated ceramic network (PICN); GC Cerasmart^® (CERA), a resin nanoceramic; Celtra^® Duo (DUO), a zirconia-reinforced lithium silicate (ZLS) ceramic; and IPS e.max ZirCAD (ZIR), a polycrystalline zirconia, were exposed to chewing simulation (1,200,000 cycles; 120 N load; 1 Hz frequency; 0.7 mm lateral and 2 mm vertical motion). The wear of both enamel cusps and materials was quantified using a 3D laser scanner, and the wear mechanisms were evaluated by scanning electron microscopy (SEM). The results were analysed using Welch ANOVA and Kruskal Wallis test (α = .05). RESULTS. ZIR showed lower volume loss (0.02 ± 0.01 mm³) than ENA, CERA and DUO (P = .001, P = .018 and P = .005, respectively). The wear of cusp/DUO [0.59 mm³ (0.50-1.63 mm³)] was higher than cusp/CERA [0.17 mm³ (0.04-0.41 mm³)] (P = .007). ZIR showed completely different wear mechanism in SEM. CONCLUSION. Composite structured materials such as PICN and ZLS ceramic exhibit more abrasive effect on opposing enamel due to their loss against wear, compared to uniform structured zirconia. The resin nano-ceramic causes the lowest enamel wear thanks to its flexible nano-ceramic microstructure. While zirconia appears to be an enamel-friendly material in wear volume loss, it can cause microstructural defects of enamel.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.176-182
• /
• 2020

Purpose: To evaluate the effects of load direction, number of implants, and alignment of implant position on stress distribution in implant, prosthesis, and bone tissue. Materials and Methods: Four 3D models were made to simulate posterior mandible bone block: two implants and 3-unit fixed dental prosthesis (FDP) with a pontic in the center (model M1), two implants and 3-unit FDP with a cantilever pontic at one end (model M2), FDP supported by three implants with straight line placement (model M3) and FDP supported by three implants with staggered implant configuration (model M4). The applied force was 120 N axially or 120 N obliquely. Results: Peak von Mises stresses caused by oblique occlusal force were 3.4 to 5.1 times higher in the implant and 3.5 to 8.3 times higher in the alveolar bone than those stresses caused by axial occlusal force. In model M2, the connector area of the distal cantilever in the prosthesis generated the highest von Mises stresses among all models. With the design of a large number of implants, low stresses were generated. When three implants were placed, there were no significant differences in the magnitude of stress between staggered arrangement and straight arrangement. Conclusion: The effect of staggering alignment on implant stress was negligible. However, the number of implants had a significant effect on stress magnitude.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.368-377
• /
• 2011

This paper explains the hardware structure of SURF(Speeded Up Robust Feature) based feature point extractor and its FPGA verification result. SURF algorithm produces novel scale- and rotation-invariant feature point and descriptor which can be used for object recognition, creation of panorama image, 3D Image restoration. But the feature point extraction processing takes approximately 7,200msec for VGA-resolution in embedded environment using ARM11(667Mhz) processor and 128Mbytes DDR memory, hence its real-time operation is not guaranteed. We analyzed integral image memory access pattern which is a key component of SURF algorithm to reduce memory access and memory usage to operate in c real-time. We assure feature extraction that using a Vertex-5 FPGA gives 60frame/sec of VGA image at 100Mhz.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.18-26
• /
• 2009

Image resolution enhancement algorithm is a basic technique for image enlargement and restoration. The main problem is the image quality degradation such as blurring or blocking effects. In this paper, we propose loss information estimation and image resolution enhancement method using low level interpolation method. In the proposed method, loss information is computed by downsampling -interpolation process of obtained low resolution image. We estimate loss information of high resolution image using interpolation of the computed loss information. Lastly, we add up interpolated high resolution image and the estimated loss information which is applied a weight factor. Our experiments obtained the average PSNR 1.4dB which is improved results better than conventional algorithm. Also subjective image quality is more clearness and distinctness. The proposed method may be helpful for various video applications which required improvement of image.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.118-121
• /
• 2014

Image interpolation is a method of determining the value of new pixel coordinate in the process of image scaling. Recently, image contents are likely to be a large-capacity, interpolation algorithm is required to generate fast enhanced result image. In this paper, fast multiple mixed image interpolation for image resolution enhancement is proposed. The proposed method estimates expected 12 shortfalls from four sub-images of a input image, and generates the result image that is interpolated in the combination of the expected shortfalls with the input image. The experimental results demonstrate that PSNR increases maximum value of 1.9dB, SSIM increases maximum value of 0.052, and the subjective quality is superior to any other compared methods. Moreover, it is known by algorithm running time comparison that the proposed method has been at least three times faster than the compared conventional methods. The proposed method can be useful for application on image resolution enhancement.

• Journal of Plant Biotechnology
• /
• v.44 no.2
• /
• pp.171-177
• /
• 2017

A callus-mediated regeneration protocol for sea-milkwort, an endangered coastal plant species in South Korea, is reported here. The explants of in vitro-plantlets generated from a node culture revealed distinguishable responses in callus induction depending on genotype, explant source, light condition, and 2,4-D concentration. Especially, continuous darkness exclusively facilitated callus induction from explants prior to other treatments. The calli initiated on the media with 2,4-D ranging from 0.1 mg/L to 3.0 mg/L in the dark vigorously proliferated when subcultured on the same media in continuous darkness. Given 1.0 mg/L zeatin in addition to darkness to the calli of the 'Pistachio' genotype, normal adventitious shoots were only regenerated from nodular structures that formed earlier from the calli at the frequency of 24.4 percent. Regenerated shoots easily grew into plantlets with roots and green color on a phytohormone-free MS medium under lighted condition, that were used for node culture as plant materials. Node culture effectively multiplied plantlets in accordance with protocol by Bae et al. (2016). Acclimatized plantlet clusters developed mature plant clusters under inland environment, followed by flowering the following April. Results were merged with node culture protocol suggested by Bae et al. (2016), which, as an in vitro propagation system for sea-milkwort, may contribute to natural habitat restoration.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.393-407
• /
• 2019

In this study, we prepared lignocellulosic artificial soil that contains Bacillus subtilis (peat moss/perlite/ steam-exploded oak wood/microbial culture = 3:1:3:3, w/w/w/w) for use in the restoration of damaged soil areas. The prepared lignocellulosic artificial soil was mixed with soil at ratios of 0%, 25%, 50%, 75%, and 100%. These mixed soils were then applied to fields, and the resultant physicochemical properties and their effects on the plant growth of Lespedeza cyrtobotrya were observed. The mixture of the prepared artificial soils (mixed at ratios of 25%-100%) with soil had a bulk densities of <$0.04g/cm^3$, porosities of >85%, pH values between 4.3 and 4.7, electrical conductivities of <0.5 dS/m, C/N ratios between 15.0 and 26.5, organic matter content between 23.6% and 43.2%, and bacterial densities between $157{\times}10^6$ and $624{\times}10^6CFU/g$. In addition, the prepared artificial soils mixed with soil at ratios of 25%-50% exhibited higher plant growth rates for L. cyrtobotrya compared with the control. Overall, we identified positive correlations between the plant growth of L. cyrtobotrya and soil bulk density, porosity, water-holding capacity, C/N ratio, organic matter, and bacterial densities.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.561-570
• /
• 2016

This research was a technical case study for the authentic restoration of the seven-storied Simgoksa stone pagoda after disassembly and reconstruction using three-dimensional image analysis. During disassembly and reconstruction, the pagoda's properties were analyzed in terms of the overall modification and displacement of the pagoda. Distortion was minimized by ensuring structural stability during the reconstruction process. Also, the original site of the pagoda was examined in order to utilize it fully during rebuilding. Before reconstruction of the pagoda, moss and lichen on the stone surfaces were removed by scientific surface cleaning. The foundation of the pagoda was reinforced with rammed earth than was similar to the original foundation using a mixture of soil and quicklime. The results are expected to provide valuable data for the reconstruction of other stone pagodas.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.201-206
• /
• 2022

This study is a study that provides basic data and direction related to the cultural city policy of Wanju-gun. The goal of this study is to provide policy implications by analyzing domestic and overseas cases that have succeeded in cultural city policy based on case documents. This study consists of the instruction of Chapter 1, the review of cultural city policies in Chapter 2, the analysis of domestic cases in Chapter 3, the analysis of overseas cases in Chapter 4, and the conclusion of Chapter 5. Chapter 2, the Cultural City Policy Review, deals with the concept and types of cultural cities, and policy-related development projects. Chapter 3, Domestic Case Analysis, analyzed the Seoul City Urban Renewal Project, Seoul Cheonggyecheon Stream Restoration Project, and Changwon Public Art Project. Chapter 4, Overseas Case Analysis, analyzed the Kanazawa Civic Art Village in Japan, Bant 1929 in Yokohama, Japan, and Zollverein in Germany. Through these cases, we'd like to provide the successful policy direction and basic data of the cultural city of Wanju-gun.