• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.358-365
• /
• 2008

A differential-gain-controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8GHz$ UWB system. In high gain mode, measurements show a differential power gain of $14.1{\sim}15.8dB,\;13.3{\sim}15dB$, respectably, an input return loss higher then 10dB, an input IP3 of -19.3 dBm, a noise figure of $4.85{\sim}5.09dB$, while consuming only 19.8 mW of power from a 1.8V DC supply. In low gain mode, measurements show a differential power gain of $-6.1{\sim}-4.2dB,\;-7.6{\sim}-5.6dB$, respectably, an input return loss higher then 10dB, an input IP3 of -1.45 dBm, a noise figure of $8.8{\sim}10.3dB$, while consuming only 5.4mW of power from a 1.8V DC supply.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.19-25
• /
• 2002

Ternary $xSrO-yB_2O_3-0.1Al_2O_3$ and $xSrO-yB_2O_3-0.1SiO_2$ glasses were prepared as a function of R(${\equiv}x/y$). The fraction of four-coordinated brans ($N_4$), symmetric three-coordinated barons ($N_{3S}$), and asymmetric three-coordinated barons ($N_{3A}$) were determined quantitatively to study the structures of these glasses by $^{11}B$ NMR. The values of $Q_{cc}$ and ${\eta}$ for $BO_3$ unit in the glasses were 2.74MHz and 0.22, those for $BO_3{^-}$ unit were 2.54MHz and 0.55, and those for $BO_4$ unit 0.60~0.75MHz and 0.00, respectively. The structure of SrBAl glass at $R_{1st}$ consisted of tetraborate ($[B_8O_{13}]^{-2}$) units and 1st-modified diborate ($[B_2Al_2O_7]^{-2}$) units, and those for the glass at $R_{max}$consisted of diborate ($[B_4O_7]^{-2}$) units, metaborate ($[BO_2^{-1}]$), 1st-modified diborate units, and 2nd-modified diborate ($[B_2Al_2O_8]^{-4}$) units. Due to the oxygens introduced from the strontium oxide. $AlO_4$ units were preferably formed rather than $BO_4$ units. And, the structure of SrBSi glasses in the region $R{\leq}0.5$ could be viewed as binary $SrO-B_2O_3$ glasses structure diluted by silicate oxide: therefore, the Si atoms of the glasses did not contributed to the change the configuration around the boron atoms. The silicate oxide was formed the $SiO_4{^-}$ units rather than the $BO_3{^-}$ units by the oxygens introduced from the storntium oxide in the region of $R{\geq}R_{max}$, and structure of those glass at $R_{max}$ consisted of diborate units, metaborate units loose $BO_4([BO_2]^{-1})$, and $SiO_4{^-}([SiO_{2.5}]^{-1})$ units.

• Journal of the Korean Mathematical Society
• /
• v.34 no.3
• /
• pp.673-693
• /
• 1997

In this work, the irreducible complex representations of degree 4 of $B_4$, the braid group on 4 strings, are classified. There are 4 families of representations: A two-parameter family of representations for which the image of $P_4$, the pure braid group on 4 strings, is abelian; two families of representations which are the composition of an irreducible representation of $B_3$, the braid group on 3 strings, with a certain special homomorphism $\pi : B_4 \longrightarrow B_3$; a family of representations which are the tensor product of 2 irreducible two-dimensional representations of $B_4$.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.351-363
• /
• 1990

A mutant was selected by NTG treatment of Mycobacterium sp. NRRL B-3805, which was capable of degrading plant sterol to androsta-4-ene-3, 17-dione and yields was higher than NRRL B-3805. Also this mutant produced androst-4-ene-3, 17-dione faster than NRRL B-3805. It described the mode of sitosteroidal degradation, and the interrelation between cell membrane and its attachment to substrate during the sterol degradation process by this mutant and it was compared with Mvcobacterium sp. NRRL B-3805.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.260-268
• /
• 2010

The lactate dehydrogenase (EC 1.1.1.27, LDH) isozymes in tissues from Channa argus were purified and characterized by biochemical, immunochemical and kinetic methods. The activity of LDH in skeletal muscle was the highest at 380.4 units and those in heart, eye and brain tissues were 13.4, 3,5 and 5.4 units, respectively. Citrate synthase (EC 4.1.3.7, CS) activity in heart tissue was the highest at 20.7 units. LDH/CS in skeletal muscle, heart, eye and brain tissues were 172.9, 0.6, 0.32 and 0.47. Protein concentration in skeletal muscle tissue was 14.7 mg/g and specific activities of LDH in skeletal muscle, heart, eye and brain tissues were 25.88, 0.79, 0.31 and 1.38 units/mg, respectively. Therefore, skeletal muscle tissue was anaerobic and heart tissue was aerobic. The LDH isozymes in tissues were identified by polyacrylamide gel electrophoresis, immunoprecipitation and Western blot with antiserum against $A_4$, $B_4$, and eye-specific $C_4$. LDH $A_4$, $A_3B$, $A_2B_2$. $AB_3$ and $B_4$ isozymes were detected in every tissue, $C_4$, $AC_3$, $A_2C_2$ and $A_3C$ were detected in eye tissue, and $A_3C$ was found in brain tissue. LDH $A_4$, $A_3B$, $A_2B_2$, $AB_3$, $B_4$, eye-specific $C_4$ isozymes were purified by affinity chromatography and Preparative PAGE Cells. The LDH $A_4$ isozyme was purified in the fraction from elution with $NAD^+$ containing buffer of affinity chromatography. Eye-specific $C_4$ isozyme was eluted right after $A_4$, after which $B_4$ isozyme was eluted with plain buffer. As a result, one part of molecular structures in $A_4$, $B_4$ and eye-specific $C_4$ were similar, but were different from each other in $B_4$ and $C_4$. Therefore the subunit A may be conservative in evolution, and the evolution of subunit B seems to be faster than that of subunit A. The activity of LDH $A_4$, $A_2B_2$, $B_4$, and eye-specific $C_4$ isozymes remained at 39.98, 21.28, 19.67 and 16.87% as a result of the inhibition by 10 mM of pyruvate, so the degree of inhibition was very high. The $Km^{PYR}$ values were 0.17, 0.27 and 0.133 mM in $A_4$, $B_4$ and eye-specific $C_4$ isozymes, respectively. The optimum pH of LDH $A_4$, $B_4$, eye-specific $C_4$, $A_2B_2$, $A_3B$, and $AB_3$ were pH 6.5, pH 8.5, pH 5.5, pH 6.0-6.5, pH 5.0 and pH 7.5. The $A_4$ and heterotetramer isozymes stabilized a broad range of pH. Especially, LDH activities in skeletal muscle tissue were high, resulting in a high degree of muscle activity.LDH metabolism in eye tissue seems to be converted faster from pyruvate to lactate by eye-specific $C_4$ isozyme as eye-specific $C_4$ have the highest affinity for pyruvate, and right after the conversion, oxidation of lactate was induced by $A_4$ isozyme. It was found that expression of Ldh-C, affinity to substrate and reaction time of $C_4$ isozyme were different according to the ecological environmental and feeding capturing patterns.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.76-82
• /
• 2001

Because the biological tissue with inhomogeneous acoustic properties does not keep a particular shape, the measurement of propagation characteristics of ultrasonic fields by the conventional scanning method with a miniature hydrophone is difficult. In this study, a two-dimensional may hydrophone was fabricated using the PVDF (Polyvinylidene fluoride) piezo-electric film and a ultrasonic field measurement system with it was established. For the acoustic field produced by a circular plan transducer with center frequency of 2.25㎒ and 13㎜ in diameter, it was possible to make a fairly accurate field measurement using the hydrophone system. The attenuation coefficients at 2.25 ㎒ for biological tissues were 0.7∼1.3 dB/cm(average; 1.0 dB/cm) in bovine liver, 1.0∼1.8 dB/cm (average; 1.6 dB/cm) in pig liver, 0.9∼2,9 dB/cm(average: 2.1 dB/cm) in bovine muscles, 1.7∼3.3 dB/cm (average; 2.5 dB/cm) in pig muscles.

• Journal of Life Science
• /
• v.24 no.9
• /
• pp.1001-1005
• /
• 2014

Ginsenoside Rg3 is one of the active ingredients extracted from red ginseng, and it is an effective chemical component of the human body and well known in herbal medicine as a restorative agent. Several studies have shown that Rg3 has a potent anti-tumor effect on various cancer cell lines. However, Rg3-induced apoptosis in B16F10 melanoma cancer cells is not well understood. In the present study, we tested whether ginsenoside Rg3 could induce apoptosis in B16F10 melanoma cells. We found that Rg3 could inhibit B16F10 melanoma cell viability in a dose-dependent manner, but not normal cells, such as EA.hy.926 and NIH3T3 cells. We also found that Rg3 could induce apoptosis in B16F10 melanoma cells using tunnel-staining assay in a dose-dependent manner. Rg3 treatment induces the phosphorylation of p38 and the expression of Bax, but it inhibits the expressions of the phosphorylation of focal adhesion kinase Bcl2 and pro-caspase3. Taken together, our data suggest that Rg3 could be useful as an anti-cancer agent in B16F10 melanoma cells.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.481-485
• /
• 1992

In order to upgrade native sheep, Rambouillet (R) rams were mated to Kaghani (K) ewes to generate F1 ($R{\times}K$) crossbred ewes. Crossbred ewes were backcrossed to Rambouillet rams to produce B1 ($R{\times}F1$), B2 ($R{\times}B1$) and B3 ($R{\times}B2$) genotypes. Weaning weight of 2605 lambs and wool weight of 2378 mature ewe records, representing R, K, F1, B1, B2 and B3 genotypes, were analyzed to compare genetic variation among genotypes produced during upgrading process and identify genotypes of the highest performance. Performance of Rambouillets was also evaluated under semi-temperate climate. Data were adjusted for yearly variation considering Rambouillet as a control. Genotypes influenced lambs weaning weight (p<.01). B1 lambs were heaviest (18.4 kg) followed in order by B2, F1, B3, R and K lambs (18.3, 17.9, 16.9, 16.8 and 13.2 kg, respectively). The highest wool production was 2.5 kg from R ewes followed by B2 (2.3), B3 (2.3), F1 (2.0) and K (1.2) ewes (p < .01). Ewe mating weight, reproduction, growth and wool production of Rambouillets deteriorated significantly after the first decade of their importation. Compared with the first phase (1959-1971), ewe mating weight, litter size, birth weight, lamb weaning weight and wool production declined by 20, 23, 32 and 36%, respectively, in the second phase (1972-1988).

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.22-27
• /
• 2005

The preparation of B4C by SHS in $B_{2}O_{3}-Mg-C$ system was investigated in this study. In the preparation of B4C, the effect on reactivity and reaction products of the initial pressure of inert gas in reactor, the content of Mg and C in mixture was investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 25 atm, and as the pressure increased, the concentration of unreacted Mg decreased and combustion temperature increased. At the initial inert gas pressure in reactor of 25 atm, the optimum composition for the preparation of pure B4C was $2B_{2}O_{3}+6.3Mg +0.94C$. The B4C synthesized in this condition had an irregular shape and the particle size of $1\~3{\mu}m$.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.315-323
• /
• 2022

PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS. Additively manufactured RNC specimens were divided into 4 groups depending on the content of ceramic fillers and polymers: 0% barium silicate and 100% polymer (B0/P10, control group); 50% barium silicate and 50% polymer (B5/P5); 60% barium silicate and 40% polymer (B6/P4); 67% barium silicate and 33% polymer (B6.7/P3.3). The compressive strength (n = 15) and fracture toughness (n = 12) of the specimens were measured, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses were performed. Independent sample Kruskal-Wallis tests were performed on the compressive strength and fracture toughness test results, and the significance of each group was analyzed at the 95% confidence interval through post-tests using the Bonferroni's method. RESULTS. B6/P4 and B6.7/P3.3 exhibited much higher yield strength than B0/P10 and B5/P5 (P < .05). Compared to the control group (B0/P10), the other three groups exhibited higher ultimate strength (P < .05). The fracture toughness of B6/P4 and B6.7/P3.3 were similar (P > .05). The content of barium silicate and fracture toughness showed a positive correlation coefficient (R = 0.582). SEM and EDS analyses revealed the presence of an oval-shaped ceramic aggregate in B6/P4 specimens, whereas the ceramic filler and polymer substrate were homogeneously mixed in B6.7/P3.3. CONCLUSION. Increasing the ceramic filler content improves the mechanical properties, but it can be accompanied by a decrease in the flowability and the homogeneity of the slurry.