• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.3-12
• /
• 2016

Recently, the study on 5G mobile communication systems using the millimeter-wave frequency band have been actively promoted and the importance of compensation of the nonlinearity of power amplifier caused by the characteristics of millimeter-wave frequency propagation attenuation is increasing. In the paper, we propose a piecewise polynomial model based on subdivision coefficient which are characteristics of power amplifier separated linear section and a non-linear section. In addition, the structure of digital predistortion based on the proposed model and direct learning method are proposed to implement a digital predistortion. To verify the proposed model, digital predistortion based on the proposed model and direct learning method for 60 GHz power amplifier using LTE signal implemented in the FPGA. And the hardware test bench measured performance and complexity. The proposed model achieves 3.3 dB gain over the single polynomial model in terms of the ACLR and reduces 7.5 percent in terms of the complexity.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.224-230
• /
• 2009

In the latest date, medical body area networks (MBANs) are emerging as a new technology for diagnosis the human body. MBANs in the health care fields are based on short-range and low-power (e.g. ubiquitous computing) among small-sized devices, and have been used by means of medical services. In this paper, we proposed an emergency message transmission protocol using carrier sense multiple access/time division multiple access in MBANs. This scheme focuses on dependability and power-efficiency. In order to increase the reliability of the transmission, this scheme modified a MCTA slot of IEEE 802.15.3 standard to a SR-MCTA slot. SR-MCTA slot is assigned by MBAN coordinator according to requesting terminal nodes. The method, having the priority of transmission, occurs a collision packet randomly. Results from this proposed solution revel that reservation-based TDMA medical body area network(MBAN) protocol for transmitting emergency message was improved in terms of transmission delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.863-867
• /
• 2007

In this paper, We have designed miniature microstrip patch antenna based on fractal structure using L-shaped feeding structure for 4G mobile communication applications. Miniature antenna has achieved by the presence of unusual fundamental resonant mode which we call "crossed-diagonal"(CD)current. Using CST Microwave Studio 5.0, patch antenna was designed. The simulated input return loss showed the bandwidth of 1.2647[GHz]($2.944{\sim}4.209GHz$), 35.4% below -10dB. The gain of E, H-plane was achieved 8.3dBi and 8.4dBi respectively. And beamwidth of 3dB in the E, H-plane was $40.6^{\circ}$ and $81.6^{\circ}$, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.755-762
• /
• 2016

Motion graphic is the recently emerged technique which extends the ways of expression in video industry. Currently, it is worldwide trends that the image design gets more attention in the field of movie, advertisement, exhibition, web, mobile, games and new media, etc. With the development of computer's new technologies, VFX methods for the visual content is dynamically changed. Such production methods combine the real scenary and CG(Computer Graphic) to compose realistic scenes, which cannot be pictured in the ways of ordinary filming. This methods overcome the difference between the real and virtual world, maximize the expressive ways in graphics and real space. Match moving is technique of accurate matching between real and virtual camera to provide realistic scene. In this paper we propose the novel technique for motion graphic image production. In this framework we utilize the match moving methods to get the movements of the real camera into 3D layer data.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.386-391
• /
• 2011

CRU (contiguous resource unit) composed of adjacent OFDMA subcarriers is popularly adopted for recently developed cellular communication standards, e.g. IEEE 802.16e/m. If multiple CRUs having different SNR are assigned to a mobile station, and multiple packet streams are independently transmitted by using H-ARQ transmission, an achievable data rate can be varied according to the channel allocation method of re-transmission packets and new transmission packets. In this paper, the optimum channel allocation method for the above stated problem, and several sub-optimum channel allocation methods to reduce the computational complexity of the optimum allocation method are proposed. According to the simulation results, a sub-optimum allocation method assigning a CRU having good SNR to new transmission packet shows marginal performance loss compared with optimum method, however, the computational complexity can be significantly reduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.223-228
• /
• 2007

In this paper, Wideband antenna using E-shaped stacked patches has been designed and fabricated for 4th generation mobile communication(IMT-Advanced) AccessPoint application. E-shaped patch was miniature and brodband by made the movement route of current long. And inductive of coaxial probe compensates capacitive by slot. Therefore we fabricated to improve the bandwidth of proposed antenna. The E-shaped single patch antenna has an impedance bandwidth of about 13%(510[MHz]), By adding a second patch at the top of the first patch a bandwidth of 56%(2060[MHz]). The final fabricated antenna could have a good return loss(Return loss ${\leq}-10dB$) and a high gain(over 9.6dBi) at the range of 3.23 ${\sim}$ 5.29 [GHz].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.386-396
• /
• 2003

Recently, mobile communication systems have supported various services including internet from voice centric service as they evolve toward 3G. To accommodate the increasing number of users, an AAL2 multiplexing scheme is introduced in the UTRAN tub interface for link efficiency. However, limited radio resources and different requirements of various services make it difficult to guarantee the QoS requirements at radio access networks. The conventional AAL2/ATM multiplexing systems focused on the multiplexing efficiency of voice anddata services and QoS issues of real time and non real time services. In this paper, we classfy various services according to QoS requirements and propose AAL2/ATM multiplexing schemes using statistical multiplexing and scheduling with a rather simple structure to guarantee the given requirements. Simulation results show that the proposed schemes perform better than the conventional schemes to guarantee QoS requirements of various services.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2009

IEEE802.11 Wireless LAN(WLAN) is being widely used in public space such as airport, and increases the networking boundary in campus and enterprise, and it has lastly attracted considerable attention for mesh network and converged network with other 3G mobile communication networks. In WLAN, load balancing among Access Points(AP) is an important issue for efficient resource management or supporting the Quality of Service(QoS) of traffic, but most researches focused on the AP selection in network entry or roaming of Stations(STA). In this paper, we propose an AP-Initiated Flow Redirection(FR) for AP load balancing by monitoring AP's availability in the true sense. When the AP's resource becomes almost saturated, that is used more than a specific threshold, the AP queries the roaming possible neighbor APs about their availability and calculates the distribution of traffic load with statistical methods such as entropy or chi-square. Finally, the AP decides flows and new APs for redirection and performs it. Our simulation results show that our FR mechanism increases the performance in the various views.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.271-280
• /
• 2010

For the next generation mobile communication system, diverse wireless network techniques such as beyond 3G LTE, WiMAX/WiBro, and next generation WLAN etc. are proceeding to the form integrated into the All-IP core network. According to this development, Beyond 3G integrated into heterogeneous wireless access technologies must support the vertical handover and network to be used of several radio networks. However, unified management of each network is demanded since it is individually serviced. Therefore, in order to solve this problem this study is introducing the theory of Common Radio Resource Management (CRRM) based on Generic Link Layer (GLL). This study designs the structure and functions to support the vertical handover and propose the vertical handover algorithm of which policy-based and MCDM are composed between LTE and WLAN systems using GLL. Finally, simulation results are presented to show the improved performance over the data throughput, handover success rate, the system service cost and handover attempt number.