• Quality Improvement in Health Care
• /
• v.3 no.1
• /
• pp.144-152
• /
• 1996

Background : Because of introduction of nationwide health care system in 1989 and the improvement of socioeconomic status of population the number of outpatient visiting university hospital has good facilities and manpower has increased. So the waiting time for medical service at university hospital are lengthened. Particularly outpatients complain that waiting for prescribed drugs at pharmacy depart are long. Reducing waiting time at pharmacy depart door-to-door delivery system that the patients applying for door-to-door delivery receive prescribed drug at home without waiting at pharmacy depart were studied. The objective of this study is to analysis the opinion of outpatients for door-to-door delivery system, to study the appropriateness of adopting the system and to produce ideal model for the system. Method : Outpatients waiting drug at pharmacy depart were questioned about door-to-door delivery system. to find the factors affect utilizing the system the logistic regression was used. Result : 83.3% of the patients want to utilize the system without charging, and 72.9% of the patients want to utilized system with charging. 68.3% of patients with charging want to use this system because of long waiting time at pharmacy depart. 50% of patients who do not want to use door-to-door do not use this system because of incorrect delivery. The affecting factors to utilize the system were sex, waiting time, fee. Conclusion : The model for door to door delivery system. 1. door-to-door personnel reside in hospital and the patient want to utilize the system apply for the delivery with charging. 2. The applied drugs dispense at spare time. 3. Delivery company gathers drug at appointed time and delivers. 4. The delivery fee is 2,000-3,000 won. 5. To prevent from loss and changing the drug the name of patient on packet are printed and drug packet are sealed. 6. The company submit the confirm sheet which are written that the patient received drug correctly to hospital. 7. The delivery time of drug is reserved for the convenience of receiving.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.52-57
• /
• 2012

Proper door effort is required for the safety of passenger and pedestrian while securing door operating convenience. 3D finite element analyses for a hybrid door checker were carried out to estimate door checker arm resistance force. And, from the estimated door checker arm resistance force and theoretically calculated self-closing force, door effort was predicted. The analysis results at checker arm peaks showed excellent correlation with the test results. Also, in order to reduce solving time, a modified model with simple spring element was investigated. Finally an equation to easily calculate checker arm resistance force from checker arm shape and spring constant was suggested and its usefulness in early design stage was discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.131-137
• /
• 2003

Proper door effort, required force to open or close a vehicle door, is an essential door design factor for the safety of passengers and pedestrians. Section shape of the door checker arm is the most influential design parameter for achieving a door effort design target. In this research. an analysis procedure to predict door effort using a simplified plane strain finite element model wes investigated for two passenger cars, for which mechanism of checker systems were: different. The variation of checker arm force to be required during moving on arm in opening and closing direction was estimated through analysis, and the result was transformed to the door effort with respect to door opening angle by considering door characteristics. Also, the self·closing force due to door weight was theoretically calculated and added to the door effort from checker arm force. Finally the estimated results of door effort were compared with test results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2017

Objectives: The objective of this study was to evaluate the exposure levels of door-to-door deliverers to fine particulate matter (PM2.5). Another objective was to confirm the general working patterns of door-to-door deliverers via survey. Methods: In the city of Daegu, ten door-to-door deliverers who wished to join the study were recruited. The general working characteristics of door-to-door deliverers were surveyed using self-reported questionnaires. In the cabin of each car driven by a deliverer, a real-time PM2.5 sampler (Sidepak, Model AM510, TSI Inc., MN, USA) and a GPS device (GPS 741, Ascen, Korea) were installed. Each deliverer was monitored for four days per week so that each day could be monitored at least four times. Results: A total of 40 measurements of PM2.5 concentrations were taken during delivery of parcels. The average exposure levels of door-to-door deliverers to PM2.5 was $44.62{\mu}g/m^3$ ($7-9443{\mu}g/m^3$. Exposure levels to PM2.5 according to the day of the week and coverage areas were not significantly different (p>0.05). Door-to-door deliverers using trucks with older diesel engines manufactured before 2006 had significantly higher exposure levels to PM2.5 than in the case of trucks with diesel engines manufactured after 2006 (p<0.05). Many of the door-to-door deliverers reported the status of having windows open during the delivery task. During delivery services, the working hours spent in residential areas were higher than on roadsides, but exposure levels to PM2.5 in residential areas and on roadsides were $46.17{\mu}g/m^3$ and $49.90{\mu}g/m^3$, respectively. Real-time PM2.5 exposure levels were significantly different between roadways and residential areas (p<0.001). Conclusions: PM2.5 exposure levels of door-to-door deliverers were found to be affected by higher vehicle emissions from the roadsides near their vehicle during deliveries and while driving to other locations compared to by PM2.5 from the diesel engines of their own trucks. Particle concentrations from roadsides and emissions from nearby vehicles through open windows were the main source of PM2.5.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.361-370
• /
• 2017

Objectives: This study evaluated the diesel engine exhaust (DEE) exposure levels of door-to-door deliverers in Daegu from July to September. Methods: We measured exposure levels of DEE surrogates for the same door-to-door deliverers who joined the particulate matter 2.5 exposure study previously published in this journal. Black carbon(BC) concentrations were measured using real-time BC monitoring devices with 1 minute interval. $NO_2$ concentrations were monitored using passive badges. DEE exposure data were analyzed using the same characteristics and GPS information as the first study. Results: A total of 40 measurements of BC concentrations and $NO_2$ concentrations were collected during delivery of parcels. The average exposure levels to BC, and $NO_2$ were $2.23{\mu}g/m^3$ ($0.001-350.85{\mu}g/m^3$) and 21.26 ppb(3.3-61.37 ppb), respectively. Exposure levels to BC according to the day of a week and coverage areas were not significantly different(p>0.05). Delivery trucks manufactured before 2006 caused significantly higher exposure to BC than the trucks manufactured after 2006(p<0.05). Exposure levels of BC integrated for each time in residential area and roadsides were $1.96{\mu}g/m^3$ and $3.46{\mu}g/m^3$, respectively, and the difference was statistically significant(p<0.001). The Pearson correlation coefficients between the ambient $PM_{2.5}$ and BC was significant, r=0.26(p<0.01); however, the correlations between $PM_{2.5}$ and ambient $PM_{2.5}$, and between BC of DEE and $PM_{2.5}$ of DEE did not show a significant correlation Conclusions: BC and $NO_2$ exposure levels were significantly lower when door-to-door deliverers drove newer trucks. BC exposure levels of deliverers were higher in roadsides than in residential area. DEE from nearby vehicles through open windows might be the main source of BC exposure.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.66-71
• /
• 2013

The purpose of this study is to assess the criteria on a floor hinge and door closer for the optimum design of the access door of a smoke control room. The door opening force due to differential pressure is 60.75 N, 40.5 N, 32.91 N and 12.66 N when the differential pressure is 60 Pa, 40 Pa, 32.5 Pa and 12.5 Pa, respectively. The door opening force of the floor hinge and door closer to which the criteria of KS F 2806 are applied is 27.5 N, 40 N, 75 N, 100 N and 125 N for the Nos. 1, 2, 3, 4 and 5 class floor hinges and door closers, respectively. This study compared the differential pressure and opening force limits of floor hinges and door closers with the values specified in NFSC 501A and found that they exceeded the criteria specified in NFSC 501A. Therefore, it is necessary to reflect the differential pressure and smoke control wind speeds as well as the opening forces specified in NFSC 501A on the design of floor hinges and door closers. The installation conditions of floor hinges and door closers of access doors differ depending on the type and name of a smoke control damper. This study found that Nos. 1, 2 and 3 floor hinges and door closers could be installed for access doors with low differential pressure and that Nos. 1 and 2 floor hinges and door closers could be installed for access doors with normal differential pressure.

• Journal of Families and Better Life
• /
• v.22 no.5
• /
• pp.1-16
• /
• 2004

The purpose of this study is to identify the expectation of vocational abilities and the level of the existing abilities of the door-to-door saleswomen in the cosmetic industry, in order to provide baseline information that can be used to improve sales ability. The data were collected from 1,168 respondents to a questionnaire. Major findings were as follows: 1. The most commonly expected aptitude for the door-to-door salesperson was the ability 'to gain the confidence from customers'. The other important aptitudes were 'good attitudes', 'product information' and 'pleasant personality and patience'. 2. The overall level of the abilities according to their self-evaluation when compared with the level of expected abilities was 64.9 %. The item that received the lowest self-evaluation was 'ability in developing new market and audience'. 3. Vocational ability expectation was affected most strongly by education level. The variables that affected self-evaluation were career paths, education level, income, sales volume and position.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.1-29
• /
• 2018

This article demonstrates that both the Warsaw Convention Systemand the Montreal Convention are not designed for multimodal transport, let alone for "Door to Door" transport. The polemic directed against the "Door to Door" application of the Warsaw Convention systemand the Montreal Convention is predominantly driven by the text and the drafting philosophy of the said Contentions that since 1929 support unimodalism-with the rule that "the period of the carriage by air does not expend to any carriage by land, by sea or by inland waterway performed outside an airport" playing a profound role in restricting their multimodal aspirations. The drafters of the Montreal Convention were more adventurous than their predecessors with respect to the boundaries of the Montreal Convention. They amended Art. 18(3) by removing the phrase "whether in an aerodrome or on board an aircraft, or, in the case of landing outside an aerodrome, in any place whatsoever", however, they retained the first sentence of Art. 18(4). The deletion of the airport limitation fromArt. 18(3) creates its own paradox. The carrier can be held liable under the Montreal Convention for the loss or damage to cargo while it is in its charge in a warehouse outside an airport. Yet, damage or loss of the same cargo that occurs during its surface transportation to the aforementioned warehouse and vice versa is not covered by the Montreal Convention fromthe moment the cargo crosses the airport's perimeter. Surely, this result could not have been the intention of its drafters: it certainly does not make any commercial sense. I think that a better solution to the paradox is to apply the "functional interpretation" of the term"airport". This would retain the integrity of the text of the Montreal Convention, make sense of the change in the wording of Art. 18(3), and nevertheless retain the Convention's unimodal philosophy. English courts so far remain loyal to the judgment of the Court of Appeal in Quantum, which constitutes bad news for the supporters of the multimodal scope of the Montreal Convention. According the US cases, any losses occurring during Door to Door transportation under an air waybill which involves a dominant air segment are subject to the international air law conventions. Any domestic rules that might be applicable to the road segment are blatantly overlooked. Undoubtedly, the approach of the US makes commercial. But this policy decision by arguing that the intention of the drafters of the Warsaw Convention was to cover Door to Door transportation is mistaken. Any expansion to multimodal transport would require an amendment to the Montreal Convention, Arts 18 and 38, one that is not in the plans for the foreseeable future. Yet there is no doubt that air carriers and freight forwarders will continue to push hard for such expansion, especially in the USA, where courts are more accommodating.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.10 no.2
• /
• pp.51-58
• /
• 2004

In this paper, the problem of subway platform is analyzed and the alternative as a screen door is suggested. This paper aims to improve the facility law in subway platform. Because facility law related to platform is absent, the study scope is limited to detail design that is matched to rules. Field survey is performed to 300 persons that are 150 men and 150 women in Shingil station in which the screen door is established. Also the persons are used the screen door at least 3 times. It makes the field survey credible. The study is proceeded as follows ; First, the law related to platform, the problem of platform, and the plan and status of screen door are analyzed. Second, the definition, and composition of screen door are examined. Then, kinds of screen door is analyzed and the advantage and disadvantage of each kind of screen door are compared. Third, the necessity of establishing the screen door is examined through field survey and error range of stop position is investigated. Through this flow, final results is abstracted. Direction of facility related to subway platform, applied objective and range are suggested based on this study. This study focuses the stability of platform, pleasantness, and energy saving and suggests facility improvement direction through introducing the screen door and further study.