• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.1-9
• /
• 2003

In this paper, we designed a highly suppressed sidelobe ladder type RF SAW bandpass filter based on 1-port resonator, for 800 MHz mobile communication system. In order to get the highest device characteristics, we optimized some important parameters such as the electrode thickness, electrode lambda weghting of the reflectors, and static capacitance ratio. Furthermore, we fabricated the Tx and Rx. filter using optimized parameters. Implemented filters can be used in 800 MHz mobile communication system and external impedance matching circuits are not needed. RF filter was fabricated on 36$^{\circ}$LiTaO$_3$ substrates with Al-Cu (W 3 %)and mounted 3.8mm$\times$3.8mm$\times$1.5mm SMD package. Developed filters has 2.3 dB insertion loss in the 25 MHz pass-band, 33MHz with 3-dB insertion loss, stop-band rejection of 30 dB, passband ripple is less than 0.5 The power durability of the filters measured about 3.5W and the maximum temperature variation within -2$0^{\circ}C$~8$0^{\circ}C$ was 0.09 dB/$^{\circ}C$ of 3-dB insertion loss.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.1.1-13
• /
• 1990

Authors have performed the sensory evaluation tests according to each given items after selecting various lines in order to assess the visual effects by the lines in cloth designing. The evaluations were done by means of ranking tests followed by paired comparison tests. The results obtained were as follows : 1. In the item in than "Shoulder width looks wide", the design C3 showed the best visual effect, and then B1, F8, and A5 comes in order. In "Shoulder width looks narrow", they were A2, F5, F7, and B2 in order. 2. In "Bust looks big", the effect was best in F9, and then B1, F5, C3, and A5 and order. "Bust looks small" item showed A3, C1, and F1 in order. 3. In "Waist looks thick", they were B2, D1, and F7 while in "Waist looks thin", they were B3, F8, and D6 in order. 4. In the item in that "Hip looks big", the best effect was in F9, and then E3, C2, and B4 in order. In "Hip looks small", the best one was C1, and then comes. E1, F6, and F8. 5. In "Upper body looks thick", they were D2, D4, F8, C3 and A5 in order whild in "Upper body looks thin", they were A1, F5, and D7 in order. 6. In the item "Lower body lookds thick", they were F9, C2, E3, B3, and D3 in order. In "Lower body looks thin", the best one was C1, and then D1, E2, F6, and F8 comes in order. 7. In "whole body looks thick", they were F9, F3, D3, and A5, and in "Whole body looks thin", they were F5, A1, C1, and D6 in order. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. F9, B4, D2, and D1.

• YAKHAK HOEJI
• /
• v.54 no.6
• /
• pp.441-448
• /
• 2010

In present study, classification and quality control of Genus Polygonatum were developed using the isolated from Polygonati Odorati Rhizoma and Polygonati Rhizoma. 3 components were isolated from Butanol fractions of Polygonati Rhizoma, and 2 components were isolated from Hexane and Butanol fractions of Polygonati Odorati Rhizoma. All the components were obtained using silica gel and ODS column chromatography. The compounds were identified as adenosine, 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside, 22-O-methyl-14-hydrocxyfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-Dgalactopyranosyl-26-O-${\beta}$-D-glucopyranoside, ${\beta}$-Sitosteryl-3-O-${\beta}$-D-D-glucopyranoside, 14-hydoxylfurost-5-ene-3-O-${\beta}$-Dglucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-($1{\rightarrow}3$)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranoside through physicochemical data, spectroscopic methods ($^1H$-NMR, $^{13}C$-NMR, Mass) according references. The quality control of genus Polygonatum were conducted using HPLC quantitative analysis of 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\beta}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside, 14-hydoxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-($1{\rightarrow}3$)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranoside in 30 samples collected throughout Korea and China. This method provided a tool for standardization of mix or misusing the commercial Odorati Rhizoma and Polygonati Rhizoma. As a result, contained quantity of 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside was measured $0.008{\pm}0.006%$ and 14-hydoxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-(13)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-Dgalactopyranoside was measured $0.026{\pm}0.012%$.

• Archives of Pharmacal Research
• /
• v.29 no.7
• /
• pp.535-540
• /
• 2006

Several novel 1-[2-(1H-tetrazol-5-yl) ethyl]-1H-benzo[d][1,2,3]triazoles (3a-h) have been synthesized by the condensation of 1-[2-(1H-tetrazol-5-yl)-ethyl]-1H-benzotriazole (2) and appropriate acid chlorides. 1-[2-(1H-tetrazol-5-yl)-ethyl]-1H-benzotriazole (2) was synthesized by reacting 3-(1H-benzo[d][1,2,3]triazol-1-yl)propanenitrile with sodium azide and ammonium chloride in the presence of dimethylformamide. The synthesized compounds were characterized by IR and PMR analysis. The titled compounds were evaluated for their in vitro antibacterial and antifungal activity by the cup plate method and anticonvulsant activity evaluated by the maximal electroshock induced convulsion method in mice. All synthesized compounds exhibited moderate antibacterial activity against Bacillus subtilis and moderate antifungal activity against Candida albicans. Compounds 5-(2-(1 H-benzo[d][1,2,3]triazo-1-yl)ethyl)-1H-tetrazol-1-yl)(4-aminophenyl)methanone 3d and 5-(2-(1 H-benzo[d][1,2,3]triazo-1-yl)ethyl)-1H-tetrazol-1-yl)(2-aminophenyl)methanone 3e elicited excellent anticonvulsant activity.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.161-165
• /
• 2005

$\alpha,\omega-Vinyl$ poly(dimethyl-methylphenyl) siloxane propelymer (VPMPS ) was prepared by the equilibrium polymerization of octamethylcyclotetrasiloxane $(D_4)$, 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane $(D_3^{MePh})$, and 1,1,3,3-tetramethyl-1,3-divinylsiloxane (MVS) as end-blocker. And also, $\alpha,\omega-hydrogen$ poly(dimethyl-methyltrifluoropropyl)siloxane prepolymer (HPDMFS) was prepared from $D_4$, 1,3,5-trimethyl-1,3.5-trifluoropropylcyclotrisiloxane $(D_3^{MeF3P})$, and 1,1,3,3-tetramethyldisiloxane. Poly(organosiloxane) rubber composite containing high thermal conductive filler was prepared by compounding VPMPS, HPDMFS, spherical alumina, and catalyst in high speed dissolver. The crosslinking density of poly (organosiloxane) composite was measured by oscillation rheometer. Poly(organosiloxane) composites of TC-POXR-2 and TC-POXR-4 prepared by controlling average diameters of thermal conductive filler, spherical alumina according to Horsfield's packing model were shown to 1.13 W/mK for TC-POXR-2 and 1.19 W/mK for TC-POXR-4.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2489-2497
• /
• 1994

This paper presents the development of a 10 W solid-state hybrid power amplifier(SSPA). operating over $7.7\sim8.5GHz$. The fabrication and measurement of this amplifier are performed with 3 sections, such as the front one for high gain, the middle one for driving, and high power one, to minimize the risk of failure and to increase the easiness of development. and then the final amplifier is realized by connecting 3 sections above mentioned, DC bias circuit, and temperature compensation circuit on one housing. Total small signal gain obtained is about $45\pm1dB$, the input and output return losses are 25 and 27 dB respectively. The output power measured at 1 dB gain compression point for 3 frequencies at 7.7, 8.1, and 8.5 GHz are $39.8\sim40.4dBm$, which is about 10 W. and the 3rd-order harmonic powers of 2 tones test are 13.34 dBc at output power 37.5 dBm. These obtained results satisfies the initially required specification. and the realized SSPA can be installed as a subsystem of the microwave transponder for telecommunication.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.38.2-39
• /
• 1981

Speech reception threshold is a base for word discrimination testing, but it also serves as a check for the reliability of pure tone audiogram. In order to investigate the correlation between SRT and PTA these tests were carried out in patients with conductive hearing loss and normal hearing, using Grason-Stadler 1702 Audiometer. The results were as follows; 1) The difference between the scores of SRT and PTA's was 2.4 dB with a range of -3.3 dB∼+8.3 dB in conductive hearing loss, and was 1.9 dB with a range of -6.7 dB∼+5 dB in normal hearing group. 2) The difference between the scores of SRT and each speech frequency of PTA was 6 dB at 500 Hz, 3 dB at 1,000 Hz and 8.8 dB at 2,000 Hz in conductive hearing loss, and 3 dB at 500Hz, 2 dB at 1,000Hz, and 5dB at 2,000Hz in normal hearing group.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1407-1416
• /
• 2016

This study was conducted to investigated the effects of stocking density on growth and survival of sea cucumber, Apostichopus japonicus in the indoor multiple tank for 12 weeks. There were six treatments(stocking densities) in this experiment, i.e. 1, 2, 3, 4, 5 and 10 individuals per 10 L plastic aquarium($W41{\times}H24{\times}D11cm$, represented as D1, D2, D3, D4, D5 and D10, respectively). Each treatment had ten replicates. The results showed growth variation of sea cucumber, Apostichopus japonicus decreased with the increase of stocking densities. After the end of the experiment, no significant differences(P>0.05) between D1~D5 treatment group whereas significant differences(P<0.05) between D1 and D10 treatment group. Survival rate showed D1~D10 were 90%, 90%, 100%, 95%, 94% and 72%, respectively. Especially, significant differences(P>0.05) between D1~D5 and D10 treatment group. The results indicated optimum of stocking density for sea cucumber, Apostichopus japonicus within five individuals per 10 L plastic aquarium($0.05individuals/m^2$).

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1195-1207
• /
• 2020

With the development of GeoWeb technology, 2D/3D spatial information services through the web are also has been used increasingly in the application of disaster management. This paper is suggested to construct a web-based 3D geo-spatial information mapping platform to visualize various spatial information collected at the disaster site in a web environment. This paper is presented a web-based geo-spatial information mapping service plan for the various types of 2D/3D spatial data and large-volume LiDAR point cloud data collected at the disaster accident site using HTML5/WebGL, web development standard technology and open source. Firstly, the collected disaster site survey 2D data is constructed as a spatial DB using GeoServer's WMS service and PostGIS provided an open source and rendered in a web environment. Secondly, in order to efficiently render large-capacity 3D point cloud data in a web environment, a Potree algorithm is applied to simplifies point cloud data into 2D tiles using a multi-resolution octree structure. Lastly, OpenLayers3 based 3D web mapping pilot system is developed for web visualization of 2D/3D spatial information by implementing basic and application functions for controlling and measuring 3D maps with Graphic User Interface (GUI). For the further research, it is expected that various 2D survey data and various spatial image information of a disaster site can be used for scientific investigation and analysis of disaster accidents by overlaying and visualizing them on a built web-based 3D geo-spatial information system.