• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.803-814
• /
• 2010

In this paper, we propose a frame structure for modified ATSC transmission systems which is used for a terrestrial 3D HDTV broadcasting. The modified ATSC transmission systems [2] see the potential of increasing a transmission capacity at reasonable TOV (Threshold of Visibility) by modifying channel codes of conventional ATSC systems and varying modulations. We use PN symbols (Pseudorandom Noise) in a guard interval which is used for avoiding the ISI (Inter Symbol Interference) to estimate and compensate the time-varying multi path channel effectively with a maximum transmission payload. With PN symbols in the guard interval, a CIR (Channel Impulse Response) in a time domain can be estimated and a compensation in a frequency domain can be achieved for the accurate channel estimation and compensation. The prosed frame structure is applied to the modified ATSC systems and computer simulations are performed for SER (Symbol Error Rate) performances in TU (Typical Urban)-6 Channel.

• Journal of Korea Game Society
• /
• v.13 no.4
• /
• pp.25-34
• /
• 2013

Spatial partitioning trees are needed for processing collision detections efficiently. In order to select split planes for spatial partitioning trees, the tree balance and the number of polygons overlapped with the split plane should be considered. In this paper, the heuristic algorithm controlling weight values of tree build criteria is proposed for spatial partitioning trees of 3D games. As the weight values are changed, tree build time, T-junction elimination time which can cause visual artifacts in splitting polygons overlapped with the split plane, rendering speed (frame per second: FPS) according to tree balance are analysed under 3D game simulations.

• Structural Engineering and Mechanics
• /
• v.55 no.5
• /
• pp.1015-1035
• /
• 2015

A three-dimensional (3D) numerical analysis for the train-bridge interaction (TBI) system is actively developed in this study in order to investigate the vibration characteristics of rigid-frame reinforced concrete (RC) viaducts in both vertical and lateral directions respectively induced by running high-speed trains. An analytical model of the TBI system is established, in which the high-speed train is described by multi-DOFs vibration system and the rigid-frame RC viaduct is modeled with 3D beam elements. The simulated track irregularities are taken as system excitations. The numerical analytical algorithm is established based on the coupled vibration equations of the TBI system and verified through the detailed comparative study between the computation and testing. The vibration responses of the viaducts such as accelerations, displacements, reaction forces of pier bottoms as well as their amplitudes with train speeds are calculated in detail for both vertical and lateral directions, respectively. The frequency characteristics are further clarified through Fourier spectral analysis and 1/3 octave band spectral analysis. This study is intended to provide not only a simulation approach and evaluation tool for the train-induced vibrations upon the rigid-frame RC viaducts, but also instructive information on the vibration mitigation of the high-speed railway.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.207-214
• /
• 2004

The Qis visualizational spreadsheet environment is shown to be extremely effective in supporting the visualization of multi-gigabyte multi-dimensional data sets. The Qis has a novel framestack that is the 3-D arrangement of spreadsheet elements. It enables the visualization spreadsheet to effectively manage, rapidly organize, and compactly encapsulate multi-dimensional data sets for visualization. Using several experiments with scientific users, the Qis has been demonstrated to be a highly interactive visual browsing tool for the analysis o( multidimensional data, displaying 2-D 3-D graphics, and rendering in each frame of the spreadsheet.

• Steel and Composite Structures
• /
• v.50 no.5
• /
• pp.583-594
• /
• 2024

In this paper, a Guided Simulated Annealing (GSA) algorithm is presented to optimize 2D and 3D steel frames against Progressive Collapse. Considering the nature of structural optimization problems, a number of restrictions and improvements have been applied to the decision mechanisms of the algorithm without harming the randomness. With these improvements, the algorithm aims to focus relatively on the flawed variables of the analyzed frame. Besides that, it is intended to be more rational by instituting structural constraints on the sections to be selected as variables. In addition to the LRFD restrictions, the alternate path method with nonlinear dynamic procedure is used to assess the risk of progressive collapse, as specified in the US Department of Defense United Facilities Criteria (UFC) Design of Buildings to Resist Progressive Collapse. The entire optimization procedure was carried out on a C# software that supports parallel processing developed by the authors, and the frames were analyzed in SAP2000 using OAPI. Time history analyses of the removal scenarios are distributed to the processor cores in order to reduce computational time. The GSA produced 3% lighter structure weights than the SA (Simulated Annealing) and 4% lighter structure weights than the GA (Genetic Algorithm) for the 2D steel frame. For the 3D model, the GSA obtained 3% lighter results than the SA. Furthermore, it is clear that the UFC and LRFD requirements differ when the acceptance criteria are examined. It has been observed that the moment capacity of the entire frame is critical when designing according to UFC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.248-249
• /
• 2022

In this paper, we propose a method for classifying and tracking objects based on information of multiple users obtained using RGB-D cameras. The 3D information and color information acquired through the RGB-D camera are acquired and information about each user is stored. We propose a user classification and location tracking algorithm in the entire image by calculating the similarity between users in the current frame and the previous frame through the information on the location and appearance of each user obtained from the entire image.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4956-4962
• /
• 2012

Among the various parts of automobile, automotive seat is the most fundamental item that ride comfort can be evaluated as the direct contact part with human body. Automotive seat must have the sufficient rigidity and strength at the same time with ride comfort. In this study, cushion frame and back frame at car seat are modelled with 3D. There are structural simulation analyses about 3 kinds of tests on torsion strength, vertical load strength and back frame strength. In the analysis result, the initial total deformation and the permanent total deformation has the maximum values of 5.4821 mm and 0.02539mm respectively at the torsion strength test of cushion frame. Total deformations at front and rear end parts of cushion frame become the values of 2.1159mm and 0.0606mm respectively at the test of vertical load strength of cushion frame. In case of more than this load, the maximum value of total deformation also becomes 3.1739mm. The maximum value of total deformation becomes 0.18634mm at 3 kinds of the strength tests on back frame. By the study result of no excessive deformation and no fracture cushion frame and back frame at automotive seat, the sufficient rigidity and strength to guarantee the safety of passenger can be verified.

• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.527-534
• /
• 2001

Conventional stereo image acquisition uses a pair of frame grabbers in the CAS(Computer Assisted Surgery) system. In this Paper, we developed a synchronized stereo image acquisition method with only one frame grabber Two images from left and right camera each other. were merged with different color space without time delay and thus only one frame grabber was enough toy stereo image. Due to this synchronous Property of image acquisition, we can improve spatial revolution on the computation of 3D Position. Furthermore the overall costs for 3D navigator can be down and the extraction time of stereo Position tan be shortened.