• 제목/요약/키워드: 3D structure

검색결과 6,801건 처리시간 0.04초

최소 침습적 충진 및 통상적 인레이 법으로 수복한 대구치의 응력 분포: 3-D 유한 요소 해석 (Stress distribution of molars restored with minimal invasive and conventional technique: a 3-D finite element analysis)

  • 양선미;김선미;최남기;김재환;양성표;양홍서
    • 구강회복응용과학지
    • /
    • 제34권4호
    • /
    • pp.297-305
    • /
    • 2018
  • 목적: 다양한 형태의 공동 설계 및 재료를 이용한 하악 대구치의 치아 구조 및 intracoronal 수복물에서 발생하는 응력 분포 및 최대 von Mises 응력을 분석하고자 하였다. 연구 재료 및 방법: 콤포지트레진 및 금으로 수복한 통상적 교합면 와동과(OR-C, OG-C) 인접면 와동(MR-C, MG-C) 및 콤포지트레진으로 충전한 최소 침습적 와동을 갖는 교합면 와동(OR-M) 및 인접면 와동(MR-M)의 형상을 하악 삼차원 입체 모델로 설계했다. 저작력을 부여하기 위해 총 교합력 200 N의 정적 축 방향 하중을 10개의 교합 접촉점에서 치아에 적용했다. 유한 요소 해석은 교합 하중에 의해 생성 된 응력 분포를 예측하기 위해 수행되었다. 결과: 최소 침습적 설계를 가진 수복물은 통상적 와동 설계(341.9 MPa - 397.2 MPa)에 비해 von Mises 응력(OR-M 모델: 26.8 MPa, MR-M 모델: 72.7 MPa)의 값이 현저하게 낮았다. 치아 내부에서 최대 von Mises 응력의 크기는 통상적 와동 설계(372.8 - 412.9 MPa) 및 최소 와동 설계(361.1 - 384.4 MPa) 모델에서 유사했다. 결론: 최소 침습성 모델은 수복물 중에서 최소의 von Mises 응력이 생성되었다. 법랑질 내에서는 최대 von Mises 응력이 최소 공동 설계와 기존 설계의 모델에서 유사한 크기로 관찰되었다.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

영주댐 유사조절지 상류의 용존유기물 (Dissolved Organic Matter) 특성과 물리·화학 및 생물학적 환경 요인과의 연관성 연구 (A Study on the Dynamics of Dissolved Organic Matter Associated with Ambient Biophysicochemical Factors in the Sediment Control Dam (Lake Youngju))

  • 오혜지;김도균;최지수;채연지;오종민;신경훈;최광순;김동균;장광현
    • 생태와환경
    • /
    • 제54권4호
    • /
    • pp.346-362
    • /
    • 2021
  • 유사조절지는 하천 하류로 이동하는 모래 등을 조절하기 위해 설치된 인공 횡단구조물로, 하천의 유황을 변화시켜 수체 내 용존유기물질 변화에 영향을 줄 수 있다. 내성천 상류의 영주댐 유사조절지를 대상으로 3차원 형광 EEM (Excitation-Emission Matrix) 및 PARAFAC 분석(Parallel Factor Analysis) 기법을 통해 수중 용존유기물의 주요 성분을 분석한 결과, 4개의 휴믹 유사계열 성분(C1-C3, C5)과 3개의 단백질-트립토판 유사계열 성분(C2, C6-C7)이 검출되었으며 이 중 내·외부로부터 기원된 휴믹계물질(C1-C3)이 주를 이루는 것으로 나타났다. 유기물 성분의 총량과 성분별 조성비는 유광층 내 광량에 따른 수심별 차이를 보이지 않았다. 영주댐 유사조절지에서는 유입된 외부 유기물이 지속적으로 분해되어 내부 유기물로 전환되며 이로 인해 유기물 지수는 조사기간 중 내부 기원 유기물의 우점을 나타냈다. 수체 내 내부 기원 유기물의 증가는 식물플랑크톤 현존량, 특히 남조류의 상대풍부도 및 박테리아와 윤충류 현존량의 증가와 연동되는 경향을 보여 수체 내 부영양화로 인한 녹조 발생은 미생물 먹이망 활성화와 밀접한 관계를 가지는 것으로 나타났다. 수중 유기물 특성에 대한 연구는 물리·화학적 측면에서의 수질 관리뿐만 아니라 생물학적 환경 요인과의 관계 분석을 통해 동·식물플랑크톤을 포함한 미생물 먹이망을 통한 물질 순환 이해에도 중요한 것으로 사료된다.

동적 원심모형실험에 의한 점성토 지반에 근입된 말뚝지지 기초의 응답 스펙트럼 분석 (Assessment of Response Spectrum by Dynamic Centrifuge Test for the Pile Foundation into the Clay)

  • 김상연;박종배;박용부;김동수
    • 토지주택연구
    • /
    • 제5권2호
    • /
    • pp.115-120
    • /
    • 2014
  • 현재 국내 내진설계기준에서 제시하고 있는 지반분류 방법 및 지반 증폭계수는 기반암이 주로 30m 이내에 위치하는 일반적인 국내 지반특성을 제대로 반영하지 못하고 있다. 따라서, 본 연구에서는 점성토 지반에 근입된 비정형 말뚝기초(PHC 500, 중심 간격 3D)에 대한 동적 원심모형 실험을 실시하여 자유장과 기초판의 응답 스펙트럼 결과를 비교하였다. 장주기 영역에서는 SE 지반의 설계 스펙트럼 가속도보다 기초와 자유장에서 계측된 실제 스펙트럼 가속도가 작게 나타났고, 기초에서 발생한 스펙트럼 가속도는 지진 하중이 커지면 SD 지반의 설계 스펙트럼 가속도와 유사해지는 것을 확인할 수 있었다. 이것은 연약한 지반(SE 지반)에 대한 현행 설계기준이 지진 하중을 과대평가하고 있으며 비경제적 설계를 할 수 있음을 의미한다. 1.5초 이상의 장주기 영역에서는 실험에서 측정된 스펙트럼 가속도가 SC 지반의 표준설계응답스펙트럼 가속도보다 작게 나타났고 기초 및 자유장 조건에 의한 스펙트럼 가속도 차이가 거의 발생하지 않았다. 따라서, 실제 아파트에 해당하는 1.5초 이상의 장주기에서는 국내 지반조건을 고려하여 실험에서 측정된 스펙트럼 가속도를 설계에 적용하면 표준설계스펙트럼을 적용할 때 보다 경제적인 설계가 가능한 것으로 나타났다.

응력 및 변형률 수준을 고려한 궤도 흙노반의 변형계수 특성 분석 (Investigation of Stiffness Characteristics of Subgrade Soils under Tracks Based on Stress and Strain Levels)

  • 임유진;김대성;조호진;사공명
    • 한국철도학회논문집
    • /
    • 제16권5호
    • /
    • pp.386-393
    • /
    • 2013
  • 본 연구에서는 궤도 하부 노반상에서 다짐도 확인 및 강화노반 두께 결정을 위하여 사용되는 변형계수 $E_{v2}$ 측정방법의 적절성과 측정값의 유효성을 검토하였다. 이를 위하여 반복평판재하시험(RPBT)을 실시하고 평판직하부에서 발생하는 압축변형률을 파악하였다. 동일 흙노반재료에 대한 공진주시험으로부터 획득된 전단탄성계수감소곡선과 $E_{v2}$를 비교하였다. 실 현장 RPBT의 발생변형률 수준과 변형계수의 크기가 합리적인지를 분석하기 위하여 응력조건과 대표 평균변형률계수($I_z$) 보정에 의해 반복평판재하시험 변형계수($E_{v2}$)를 재평가하였다. PLAXIS 프로그램을 이용하여 깊이에 따른 변형률 영향계수($I_z$)를 재산정하여 반복평판재하시험 결과($E_{v2}$) 해석에 미치는 변형률 영향계수의 영향을 분석하였으며 ABAQUS를 이용하여 3D궤도구조에서 노반이 받는 변형률수준을 확인하였다. 궤도하부구조가 경험하는 변형률수준에서의 변형계수 $E_{v2}$를 획득하기 위해서는 노반의 비선형성을 구현할 수 있도록 현 반복평판재하시험의 하중단계를 세분화할 필요성을 확인하였다.

수열합성을 이용한 ZnO 마이크로 구조의 성장 및 전사 (Fabrication of Vertically Oriented ZnO Micro-crystals array embedded in Polymeric matrix for Flexible Device)

  • 양동원;이원우;박원일
    • 마이크로전자및패키징학회지
    • /
    • 제24권4호
    • /
    • pp.31-37
    • /
    • 2017
  • 최근, 유연하며 몸에 부착 가능한 소자들에 대한 관심이 늘어나고 있다. 이런 관심을 뒷받침 하여 이와 관련된 다양한 연구들이 진행되고 있는데, 기존 딱딱한 성질을 가진 소자에 사용되던 무기물 기반의 재료의 경우 유연 소자로 만들기에 여러 가지 제약이 있어 유연하게 제작할 수 있는 유기물 반도체나 탄소 나노튜브 필름 등을 이용한 소자들이 주로 연구되고 개발되어 왔다. 하지만 이런 재료들을 이용한 소자의 경우 유기물 분자와 분자 사이 또는 탄소 나노튜브와 나노튜브 사이에서 전하들이 산란되는 등 재료 자체의 한계로 인해 기존의 재료를 사용한 소자들보다 전기적 성능이 떨어지는 단점을 가지고 있다. 이런 단점들을 해결하기 위하여 이 연구에서는 수직 정렬된 반도체 결정 어레이를 투명 유연한 폴리머와 결합하는 방법을 이용, 고품질 나노/마이크로 반도체 결정을 유연한 기판으로 전사 시킬 수 있는 방법을 제시한다. 위와 같은 구조는 재료에 가해지는 힘을 완화 시켜줄 수 있으며, 이로 인해 큰 변형에도 재료의 손상이 없는 소자 제작이 가능하다. 이런 구조를 구현하기 위해 위치 및 크기가 정교하게 제어된 ZnO 나노막대 단결정을 저온에서 용액공정을 통하여 합성시킨다. 이후 성장시킨 ZnO 단결정 어레이와 polydimethylsiloxane (PDMS) 폴리머를 결합시킨 후 단단한 기판에서 기계적으로 박리시켜 ZnO/폴리머 복합체를 분리해 낸다. 추가적으로 전사된 ZnO의 결정성을 확인하기 위하여 photoluminescent 분석을 진행하였으며, ZnO/폴리머 복합체를 이용한 외부 힘에 반응하는 압력 센서를 제작하였다.

Effects of thickness of GIZO active layer on device performance in oxide thin-film-transistors

  • Woo, C.H.;Jang, G.J.;Kim, Y.H.;Kong, B.H.;Cho, H.K.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.137-137
    • /
    • 2009
  • Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

  • PDF

지역별.연령별 중국 성인여성(地域別.年齡別 中國 成人女性)의 체형구성 요인(體型構成 要因)과 유형 비교 연구(類型 比較 硏究) (A Comparative Study on Chinese Adult women's constitutional components and Somatotype Characteristic)

  • 위혜정;손희순
    • 패션비즈니스
    • /
    • 제10권5호
    • /
    • pp.58-73
    • /
    • 2006
  • The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

MBE로 성장된 $In_{0.5}Ga_{0.5}As/GaAs$ 양자점 원적외선 수광소자의 수소화 처리가 광학적 특성에 미치는 특이영향 (Anomalous Effect of Hydrogenation on the Optical Characterization $In_{0.5}Ga_{0.5}As$ Quantum Dot Infrared Photodetectors)

  • 임주영;송진동;최원준;조운조;이정일;양해석
    • 한국진공학회지
    • /
    • 제15권2호
    • /
    • pp.223-230
    • /
    • 2006
  • 분자선 에피택시 (MBE)법으로 성장된 양자점 원적외선 수광소자(Quantum Dot Infrared Photodetector: QDIP)구조의 $In_{0.5}Ga_{0.5}As/GaAs$ 자발형성 양자점에 대하여, 수소화 처리(Hydrogen Plasma treatment) 전후의 각각의 특성을 광학적인 방법으로 분석하였다. 광학적 특성은 광루미네센스(photoluminescence: PL) 그리고 광전류(Photocurrent: PC)방법으로 각각 15K 300K 10K 130k 범위에서 측정되었으며, 수소화 처리 전후의 $In_{0.5}Ga_{0.5}As$ 자발형성 양자점의 광학적 특성을 비교 분석해보면, 원시료(as-grown)의 하나의 봉우리가 수소화 처리를 통하여 두개의 봉우리로 나뉘지만 PL의 전체 세기(intensity)에는 큰 변화가 없었으며, 광전류는 수소화 처리 후에 감소함을 알 수 있다. 수소화 처리 전후의 샘플에 대해 PL의 결과로부터 활성화 에너지를 계산하여 비교해보면, 수소화 처리 전후의 활성화 에너지가 다름을 알 수 있고, 이 변화된 활성화 에너지 값은 측정된 광전류의 봉우리에 해당하는 에너지 값과 거의 일치함을 알 수 있다. 수소화 처리된 샘플은 역 수소화 처리를 통하여 PL 그래프의 모양이 원시료의 모양으로 되돌아가야 함에도 불구하고, 수소화 처리된 시료의 PL의 그래프와 동일한 모습을 보였다. 이러한 현상은 자발형성 양자점의 수소화 처리에 따른 양자점 내부의 양자점 조성의 변동에 그 원인이 있는 것으로 보인다.

산사(Crataegi Fructus) 추출물로부터 ${\alpha}-amylase$${\alpha}-glucosidase$ 저해 물질 분리 및 동정 (Isolation and Identification of Inhibitory Compound from Crataegi Fructus on ${\alpha}-amylase$ and ${\alpha}-glucosidase$)

  • 김명욱;조영제;김정환
    • Applied Biological Chemistry
    • /
    • 제50권3호
    • /
    • pp.204-209
    • /
    • 2007
  • 산사 추출물로부터 ${\alpha}-amylase$, ${\alpha}-glucosidase$ 저해활성을 탐색하고 Sephadex LH-20($5{\times}45$ cm)와 MCI-gel CHP-20를 이용하여 저해활성 물질을 정제하고 구조분석을 하였다. 산사 추출물의 페놀화합물의 함량은 물 추출물에서 22.5 mg/g, 60% ethanol 추출물에서 19.2 mg/g으로 나타났으며, 산사 물 추출물 (200 ${\mu}g/ml$)에서 ${\alpha}-amylase$, ${\alpha}-glucosidase$ 저해활성이 각각 100%와 82.6%로 나타났으나, 60% ethanol 추출물(200 ${\mu}g/ml$)에서는 ${\alpha}-glucosidase$ 저해활성이 12%로 낮은 저해활성을 나타내어 산사 물 추출물을 Sephadex LH-20를 이용하여 분획한 결과 I, II, III, IV의 4가지 분획물을 획득하고 다시 Sephadex LH-20과 MCI-gel을 이용하여 nomal phase type인 $EtOH{\rightarrow}H_2O$와 reverse phase type인 $H_2O{\rightarrow}MeOH$로 유기용매의 농도를 증가 시키며 용출하여 A, B, C, D의 compounds를 얻었다. 4가지 compound 중 compound C(200 ${\mu}g/ml$)가 ${\alpha}$-amylase, ${\alpha}$-glucosidase 저해활성이 각각 97.6%, 97.7%로 가장 높게 나타났으며, FAB-MS, NMR과 IR spectrum을 분석한 결과 chlorogenic acid로 동정되었다.