• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.45-68
• /
• 2009

An aim of the study is to develop an efficient numerical simulation technique that can handle the two-scale analysis of fluid permeation filters fabricated by the partial sintering technique of small spherical ceramics. A solid-fluid mixture homogenization method is introduced to predict the mechanical characters such as rigidity and permeability of the porous ceramic filters from the micro-scale geometry and configuration of partially-sintered particles. An extended finite element (X-FE) discretization technique based on the enriched interpolations of respective characteristic functions at fluid-solid interfaces is proposed for the non-interface-fitted mesh solution of the micro-scale analysis that needs non-slip condition at the interface between solid and fluid phases of the unit cell. The homogenization and localization performances of the proposed method are shown in a typical two-dimensional benchmark problem whose model has a hole in center. Three-dimensional applications to the body-centered cubic (BCC) and face-centered cubic (FCC) unit cell models are also shown in the paper. The 3D application is prepared toward the computer-aided optimal design of ceramic filters. The accuracy and stability of the X-FEM based method are comparable to those of the standard interface-fitted FEM, and are superior to those of the voxel type FEM that is often used in such complex micro geometry cases.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.196-203
• /
• 2016

In this paper, we propose a virtual surgical planning system specialized to mandible reconstruction surgery. Mandible reconstruction surgery is one of the most difficult surgeries, even for experienced surgeons. Compared to the traditional surgical procedures, virtual surgical planning can reduce the operation time in operating room while expecting better surgical outcome with optimized planning. However, with existing software systems, it requires much time and manual operations in virtual surgical planning. To reduce preparation time and improve accuracy of virtual surgical planning, we have developed optimized functions for virtual surgical simulation of mandible reconstruction with user-friendly interface. We found that the proposed system shortened the preparation time by half compared to the existing system from the experiments. The proposed system supports surgeons to make accurate plan faster and easier. The virtually planned results are used to make surgical cutting guide by 3D printing, and this will enhance surgical performance in operating room.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.16-21
• /
• 2010

In this paper, the linear source and relay precoders are designed for AF MIMO relay systems. In order to minimize mean squared error (MSE) of received symbol vector, the source and relay precoders are proposed, and MMSE receiver which is suitable to those precoders is utilized at the destination node. As the optimal precoders for source and relay nodes are not represented in closed form and induced by iterative method, we suggest a simple precoder design scheme. Simulation results show that the performance of the proposed precoding scheme is comparable with that of optimal scheme and outperforms other relay precoding schemes. Moreover, in high SNR region, it is revealed that SNR between source and relay node is more influential than SNR between relay and destination node in terms of bit error rate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.4
• /
• pp.65-81
• /
• 2013

Urban sprawl has been the limits of traffic accommodate and the supply road. Thus, Light Rail Transit(LRT) has been proposed as the best alternative. Owing to landscape damage from construction of LRT, landscape planning should be considered seriously in the urban planning step. This paper therefore seeks to determine landscape improvement direction of LRT pier. First, the methods in this study shared landscape improvement direction type of LRT pier through previous studies such as planting of surface(30%, 60%, 90% planting of surface), graphic(character, commercial advertising, symbol), and surface treatment type(exposed concrete, white painting, pattern dies). Next, respondent evaluated 3D simulated landscape image accordingly shared types by preference and landscape adjectives using in streetscape evaluation. As a result, visual preference was the highest in planting type of surface and the lowest in the surface treatment type. Covering 60%(4.48) in planting type of surface was the highest. Because it is similar to the golden ratio considering the visual principle, we will need to take advantage through the result of this paper. Also, most landscape improvement direction which satisfied with significant level showed a positive effect from landscape improvement. Comprehensively based on these results, it suggests desirable landscape improvement direction of LRT pier in the city for solution of landscape inhibition problem.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.28-37
• /
• 1999

Differentially Responsible Adaptive Critic Learning technique is proposed for learning the control technique with multiple control inputs as in robot system using reinforcement learning. The reinforcement learning is a self-learning technique which learns the control skill based on the critic information Learning is a after a long series of control actions. The Adaptive Critic Learning (ACL) is the representative reinforcement learning structure. The ACL maximizes the learning performance using the two learning modules called the action and the critic modules which exploit the external critic value obtained seldomly. Drawback of the ACL is the fact that application of the ACL is limited to the single input system. In the proposed Differentially Responsible Action Dependant Adaptive Critic learning structure, the critic function is constructed as a function of control input elements. The responsibility of the individual control action element is computed based on the partial derivative of the critic function in terms of each control action element. The proposed learning structure has been constructed with the CMAC neural networks and some simulations have been done upon the two dimensional Cart-Role system and robot squatting problem. The simulation results are included.

• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.377-400
• /
• 2016

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.20-31
• /
• 1999

In this paper, we have chosen KimPo International Airport as an area for estimating the flutter interference, in order to analyze the flutter interference. The field test at 25 points around KimPo International Airport and the simulation have been performed for estimating the flutter interference. We consider the received power of a direct wave, the height of an antenna, the ERP of a transmitting point, transmit frequency, and the reflection coefficients of an airplane, the transmit/receive point coordinates as estimation functions for the flutter. From the results, we have found that the flutter interference from flights is very serious around the route of flight circumference, and often occurs when the height of an airplane is low, range from 40 to 240 m. Besides, the degree of the flutter interference can be changed according to the distance between an airplane and a transmitting point, elevation angle, and the reflection coefficients of an airplane.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.304-310
• /
• 2009

This paper proposes a successive MAP (maximum a posteriori probability) detection scheme with SoIC(soft interference cancellation) to reduce the receiver complexity of hierarchical M-ary QAM system. For the successive MAP detection, modulation symbols generated from the other data streams are treated as Gaussian noise or eliminated as the soft interference according to their priorities. The log-likelihood ratio of the a posteriori probability (LAPRP) of each bit is calculated by the MAP detector with an adjusted noise variance in order to take the elimination and Gaussian assumption effect into account. By separating the detection process into the successive steps, the detection complexity is reduced to increase linearly with the number of bits per hierarchical M-ary QAM symbol. Simulation results show that the proposed detection provides a small performance degradation as compared to the optimal MAP detection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.21-27
• /
• 2002

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. A number of visual or optical technologies have been successfully applied to measure three-dimensional surfaces. However, those conventional visual or optical methods have inherent shortcomings such as occlusion and variant surface reflection. X-ray vision system can be a good solution to these conventional problems, since we can extract the volume information including both the surface geometry and the inner structure of any objects. In the x-ray system, the surface condition of an object, whether it is lambertian or specular, does not affect the inherent characteristics of its x-ray images. In this paper, we propose a three-dimensional x-ray imaging method to reconstruct a three dimensional structure of an object out of two dimensional x-ray image sets. To achieve this by the proposed method, two or more x-ray images projected from different views are needed. Once these images are acquired, the simultaneous algebraic reconstruction technique(SART) is usually utilized. Since the existing SART algorithms have several shortcomings such as low performance in convergence and different convergence within the reconstruction volume of interest, an advanced SART algorithm named as USART(uniform SART) is proposed to avoid such shortcomings and improve the reconstruction performance. Because, each voxel within the volume is equally weighted to update instantaneous value of its internal density, it can achieve uniform convergence property of the reconstructed volume. The algorithm is simulated on various shapes of objects such as a pyramid, a hemisphere and a BGA model. Based on simulation results the performance of the proposed method is compared with that of the conventional SART method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.103-103
• /
• 2000

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the agility to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed unit simulator can construct a proper virtual manufacturing line along with the required process of products using several kinds of operator and work cell. A user with the simulator can utilize an interface that makes one to manage the separate task process for each manu(acturing module, change operator components and work cells, and easily teach tasks of each task module. The developed simulator was made for users convenience by Microsoft Visual C++ 6.0 that can develop a program supplying graphic user interface environment and by OpenGL of the Silicon Graphics as a graphic library to embody 3D graphic environment. Also, we show that the simulator can be used efficiently for the agile manufacturing by the communication among the factories being linked by TCP/IP and a hybrid database system made by a hierarchical model and a relational model being developed to standardize the data information.