• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.557-567
• /
• 2015

With the increasing demands of 3D spatial information in urban environment, the importance of point clouds generation techniques have been increased. In particular, for as-built BIM, the point clouds with the high accuracy and density is required to describe the detail information of building components. Since the terrestrial LiDAR has high performance in terms of accuracy and point density, it has been widely used for as-built 3D modelling. However, the high cost of devices is obstacle for general uses, and the image-based 3D reconstruction technique is being a new attraction as an alternative solution. This paper compares the image-based 3D reconstruction technique and the terrestrial LiDAR in point of establishing the as-built BIM of outdoor structures. The point clouds generated from the image-based 3D reconstruction technique could roughly present the 3D shape of a building, but could not precisely express detail information, such as windows, doors and a roof of building. There were 13.2~28.9 cm of RMSE between the terrestrial LiDAR scanning data and the point clouds, which generated from smartphone and DSLR camera images. In conclusion, the results demonstrate that the image-based 3D reconstruction can be used in drawing building footprint and wireframe, and the terrestrial LiDAR is suitable for detail 3D outdoor modeling.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.12-15
• /
• 2016

Functional and esthetic reconstruction after segmental mandibulectomy is one of the most challenging surgeries in microsurgical reconstruction field. Simulation surgery before free flap reconstruction has been performed for efficient surgery and successful results. Fibula free flap is the flap of the choice for reconstruction of the segmental mandibular defect. Straight nature of the fibula bone requires multiple segmentations to fit into mandible. 3D rapid prototype (RP) model gives a lot of information for mandibular reconstruction. The purpose of this study was to report mandibular reconstruction with free fibular flap using simulation surgery. A total of 30 consecutive patients were included for functional and esthetic evaluation. Among 30 patients, two flaps showed necrosis after radiotherapy. The other flaps were all survived and showed successful reconstruction in both function and esthetics.

• Investigative Magnetic Resonance Imaging
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2007

Purpose : To investigate the applicability of the new three-dimensional overlapped reconstruction MR angiography (3-D ORMRA) technique in patients with hemifacial spasm and to compare the new 3-D reconstruction images with conventional MRA source images. Materials and Methods : The study group comprised 27 patients with surgically proven hemifacial spasm. In all patients, conventional MRA source images and 3-D fast imaging employing steady-state acquisition (FIESTA) images were obtained prospectively. After 3-D MR angiographic images were obtained, the 3-D MRA and FIESTA images were overlapped at the workstation by using GE A/W 4.2 add/sub software. We analyzed the relationship between the offending vessels and root exit zone of the facial nerve using both 3-D ORMRA images and conventional MRA source images. Results : In 25 of 27 patients, the offending vessel at the REZ of the facial nerve could be correctly identified on conventional MRA source images. In all patients, the presumed offending vessels depicted by the overlapped 3-D reconstruction MRA image corresponded well with the intraoperative findings. The 3-D reconstruction image showed more clear visualization of the spatial relationship between the offending vessels and the root exit zone of the facial nerve. Conclusion : The overlapped 3-D reconstruction MR angiography technique is very useful and informative in patients with hemifacial spasm, as compared with conventional MRA angiography technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3721-3737
• /
• 2015

3D reconstruction based on binocular data is significant to machine vision. In our method, we propose a new and high efficiency 3D reconstruction approach by using a consumer camera aiming to: 1) address the configuration problem of dual camera in the binocular reconstruction system; 2) address stereo matching can hardly be done well problem in both time computing and precision. The kernel feature is firstly proposed in calibration stage to rectify the epipolar. Then, we segment the objects in the camera into background and foreground, for which system obtains the disparity by different method: local window matching and kernel feature-based matching. Extensive experiments demonstrate our proposed algorithm represents accurate 3D model.

• ETRI Journal
• /
• v.40 no.6
• /
• pp.788-793
• /
• 2018

3D reconstruction of urban architecture, land, and roads is an important part of building a "digital city." Unmanned aerial vehicles (UAVs) are gradually replacing other platforms, such as satellites and aircraft, in geographical image collection; the reason for this is not only lower cost and higher efficiency, but also higher data accuracy and a larger amount of obtained information. Recent 3D reconstruction algorithms have a high degree of automation, but their computation time is long and the reconstruction models may have many voids. This paper decomposes the object into multiple regional parallel reconstructions using the clustering principle, to reduce the computation time and improve the model quality. It is proposed to detect the planar area under low resolution, and then reduce the number of point clouds in the complex area.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.288-289
• /
• 2022

In this paper, we propose a method of obtaining high density geometric information using multi-view structured light. Reconstruction error due to the difference in resolution between the projector and the camera occurs when reconstruction a 3D shape from a structured light system to a single projector. This shows that the error in the point cloud in 3D is also the same when reconstruction the shape of the object. So we propose a high density method using multiple projectors to solve such a reconstruction error.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.76-79
• /
• 2015

One of the most serious complications after head and neck radiation is osteoradionecrosis (ORN) of the jaw. The etiology of ORN is extraction, minor dental procedure or dental implant surgery. When ORN of the jaw progressed to stage III, free fibular flap is the most useful methods for reconstruction. In this case report, a 67-year-old ORN patient who underwent fibular free flap reconstruction using simulation surgery with 3-dimensional rapid prototype (3D RP) model was reviewed. After partial mandibulectomy, a osteocutaneous fibula flap was used for reconstruction. Oro-cutaneous fistula was resolved after operation. Patients reported improved food intake after operation without pus discharge. Functional and esthetic results showed successful reconstruction.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1436-1443
• /
• 2019

A fast gamma-ray dose rate assessment method for complex geometries based on stylized model reconstruction and point-kernel method is proposed in this paper. The complex three-dimensional (3D) geometries are imported as a 3DS format file from 3dsMax software with material and radiometric attributes. Based on 3D stylized model reconstruction of solid mesh, the 3D-geometrical solids are automatically converted into stylized models. In point-kernel calculation, the stylized source models are divided into point kernels and the mean free paths (mfp) are calculated by the intersections between shield stylized models and tracing ray. Compared with MCNP, the proposed method can implement complex 3D geometries visually, and the dose rate calculation is accurate and fast.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.625-630
• /
• 2009

Researches of image-based 3D reconstruction have recently produced a number of good results, but they assumed that the accurate foreground to be reconstructed is already extracted from each input image. This paper proposes a novel approach to extract more accurate foregrounds by iteratively performing foreground extraction and 3D reconstruction in a manner similar to an EM algorithm on regions segmented in an initial stage, called segments. Here, the segments should preserve foreground boundaries to compensate for the boundary errors generated by visual hull, simple 3D reconstruction to minimize the computational time, and should also be composed of the small number of sets to minimize the user input. Therefore, we utilize image segmentation using the graph-cuts method, which minimizes energy function composed of data and smoothness terms, and the two methods are iteratively performed until the energy function is optimized. In the experiments, more accurate results of the foreground, especially in boundaries, were obtained, although the proposed method used a simple 3D reconstruction method.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1204-1209
• /
• 2008

Design is important in the IT, digital appliance, and auto industries. Aesthetic and art images are being applied for better design satisfaction of the products. Various artistic image patterns are used to satisfy demand of design, but it takes much lead-time and effort to implement them for making dies and molds. In this paper, a hybrid reverse engineering method generating accurate 3D engraving models from 2D art images is proposed through image processing, 3D reconstruction, and NURBS interpolation methods. In order to generate the 3D model from the 2D artistic image, cloud points with z-depth are extracted according to intensity values of the image. An adaptive median filter and harmonic filter are used to obtain the intensity values accurately. NURBS surfaces are generated through the interpolation of the cloud points. Performance of the developed system is to be confirmed through the realization of Mona Lisa and Golden Gate Bridge.