• 한국측량학회지
• /
• 제33권6호
• /
• pp.557-567
• /
• 2015

With the increasing demands of 3D spatial information in urban environment, the importance of point clouds generation techniques have been increased. In particular, for as-built BIM, the point clouds with the high accuracy and density is required to describe the detail information of building components. Since the terrestrial LiDAR has high performance in terms of accuracy and point density, it has been widely used for as-built 3D modelling. However, the high cost of devices is obstacle for general uses, and the image-based 3D reconstruction technique is being a new attraction as an alternative solution. This paper compares the image-based 3D reconstruction technique and the terrestrial LiDAR in point of establishing the as-built BIM of outdoor structures. The point clouds generated from the image-based 3D reconstruction technique could roughly present the 3D shape of a building, but could not precisely express detail information, such as windows, doors and a roof of building. There were 13.2~28.9 cm of RMSE between the terrestrial LiDAR scanning data and the point clouds, which generated from smartphone and DSLR camera images. In conclusion, the results demonstrate that the image-based 3D reconstruction can be used in drawing building footprint and wireframe, and the terrestrial LiDAR is suitable for detail 3D outdoor modeling.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.12-15
• /
• 2016

Functional and esthetic reconstruction after segmental mandibulectomy is one of the most challenging surgeries in microsurgical reconstruction field. Simulation surgery before free flap reconstruction has been performed for efficient surgery and successful results. Fibula free flap is the flap of the choice for reconstruction of the segmental mandibular defect. Straight nature of the fibula bone requires multiple segmentations to fit into mandible. 3D rapid prototype (RP) model gives a lot of information for mandibular reconstruction. The purpose of this study was to report mandibular reconstruction with free fibular flap using simulation surgery. A total of 30 consecutive patients were included for functional and esthetic evaluation. Among 30 patients, two flaps showed necrosis after radiotherapy. The other flaps were all survived and showed successful reconstruction in both function and esthetics.

• Investigative Magnetic Resonance Imaging
• /
• 제11권1호
• /
• pp.33-38
• /
• 2007

목적: 반얼굴 연축 환자에서 새로운 삼차원 중첩 자기공명 혈관 조영술 기법(3-D overlapped reconstruction MR angiographic technique, 3-D ORMRA) 을 기존의 MRA 원천영상과 비교하여 그 유용성을 알아보고자 하였다. 대상 및 방법: 수술로 반얼굴 연축이 증명된 총 27명을 대상으로 하였다. 모든 환자에서 전향적으로 기존의 MRA 원천영상과 3-D fast imaging employing steady state acquisition (FIESTA) 영상을 얻었다. 이 후 작업대 (workstation)에서 3-D MRA 영상을 만들고 GE A/W 4.2 add/sub software를 이용하여 이를 FIESTA영상과 겹쳐 3-D ORMRA영상을 얻었다. 그리고 나서 기존의 MRA 원천영상과 3-D ORMRA영상에서 각 각 얼굴신경의 신경근출구부와 병적 압박혈관 사이의 관계를 분석하였다. 결과: 기존의 MRA원천영상에서는 27명중 25명의 환자에서 얼굴 신경근출구부에서의 병적 압박혈관을 구별 할 수 있었고, 3-D ORMRA영상에서는 모든 환자에서 병적 압박혈관을 구별 할 수 있었으며, 이는 수술소견과 일치하였다. 무엇보다 3-D ORMRA영상에서 얼굴 신경근출구부와 병적 압박혈관 사이의 공간적인 관계를 좀 더 분명하게 볼 수 있었다. 결론: 3-D ORMRA 기법은 기존의 MRA 영상기법과 비교하여, 반얼굴 연축 환자에서 매우 유용하고 더 정확한 정보를 주는 방법이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3721-3737
• /
• 2015

3D reconstruction based on binocular data is significant to machine vision. In our method, we propose a new and high efficiency 3D reconstruction approach by using a consumer camera aiming to: 1) address the configuration problem of dual camera in the binocular reconstruction system; 2) address stereo matching can hardly be done well problem in both time computing and precision. The kernel feature is firstly proposed in calibration stage to rectify the epipolar. Then, we segment the objects in the camera into background and foreground, for which system obtains the disparity by different method: local window matching and kernel feature-based matching. Extensive experiments demonstrate our proposed algorithm represents accurate 3D model.

• ETRI Journal
• /
• 제40권6호
• /
• pp.788-793
• /
• 2018

3D reconstruction of urban architecture, land, and roads is an important part of building a "digital city." Unmanned aerial vehicles (UAVs) are gradually replacing other platforms, such as satellites and aircraft, in geographical image collection; the reason for this is not only lower cost and higher efficiency, but also higher data accuracy and a larger amount of obtained information. Recent 3D reconstruction algorithms have a high degree of automation, but their computation time is long and the reconstruction models may have many voids. This paper decomposes the object into multiple regional parallel reconstructions using the clustering principle, to reduce the computation time and improve the model quality. It is proposed to detect the planar area under low resolution, and then reduce the number of point clouds in the complex area.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.288-289
• /
• 2022

In this paper, we propose a method of obtaining high density geometric information using multi-view structured light. Reconstruction error due to the difference in resolution between the projector and the camera occurs when reconstruction a 3D shape from a structured light system to a single projector. This shows that the error in the point cloud in 3D is also the same when reconstruction the shape of the object. So we propose a high density method using multiple projectors to solve such a reconstruction error.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.76-79
• /
• 2015

One of the most serious complications after head and neck radiation is osteoradionecrosis (ORN) of the jaw. The etiology of ORN is extraction, minor dental procedure or dental implant surgery. When ORN of the jaw progressed to stage III, free fibular flap is the most useful methods for reconstruction. In this case report, a 67-year-old ORN patient who underwent fibular free flap reconstruction using simulation surgery with 3-dimensional rapid prototype (3D RP) model was reviewed. After partial mandibulectomy, a osteocutaneous fibula flap was used for reconstruction. Oro-cutaneous fistula was resolved after operation. Patients reported improved food intake after operation without pus discharge. Functional and esthetic results showed successful reconstruction.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1436-1443
• /
• 2019

A fast gamma-ray dose rate assessment method for complex geometries based on stylized model reconstruction and point-kernel method is proposed in this paper. The complex three-dimensional (3D) geometries are imported as a 3DS format file from 3dsMax software with material and radiometric attributes. Based on 3D stylized model reconstruction of solid mesh, the 3D-geometrical solids are automatically converted into stylized models. In point-kernel calculation, the stylized source models are divided into point kernels and the mean free paths (mfp) are calculated by the intersections between shield stylized models and tracing ray. Compared with MCNP, the proposed method can implement complex 3D geometries visually, and the dose rate calculation is accurate and fast.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.625-630
• /
• 2009

영상기반의 3차원 복원(reconstruction)에 대한 연구가 최근 좋은 결과를 많이 내고 있지만, 이는 복원의 목적이 되는 영역이 각 입력영상으로부터 미리 정확하게 추출되어있다고 가정하기 때문이다. 본 논문에서는 다시점 영상에서 세그멘트(segment)라 불리는 초기 분할된 영역을 기반으로 전경물체 추출과 3차원 복원을 EM형식으로 반복적으로 수행하는 정교한 전경물체 추출방법을 제안한다. 본 논문에서 세그멘트는 수행시간을 최소화하기 위해 사용된 3차원 복원방법인 visual hull에 의해 발생한 외곽선 오류를 보상해야 하며, 사용자의 입력을 최소화하기 위해 적은 수의 집합으로 구성되어야 한다. 이를 위해 데이터 항과 스무드 항으로 구성된 에너지 함수를 최적화할 수 있는 그래프 컷 방법을 이용하는 영상분할을 초기단계로써 수행하며, 전경물체 추출과 3차원 복원은 에너지 함수가 최적화될 때까지 반복 수행한다. 실험에서 간단한 3차원 복원 방법을 이용함에도 불구하고 전경물체의 외곽선에서 정확한 결과를 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1204-1209
• /
• 2008

Design is important in the IT, digital appliance, and auto industries. Aesthetic and art images are being applied for better design satisfaction of the products. Various artistic image patterns are used to satisfy demand of design, but it takes much lead-time and effort to implement them for making dies and molds. In this paper, a hybrid reverse engineering method generating accurate 3D engraving models from 2D art images is proposed through image processing, 3D reconstruction, and NURBS interpolation methods. In order to generate the 3D model from the 2D artistic image, cloud points with z-depth are extracted according to intensity values of the image. An adaptive median filter and harmonic filter are used to obtain the intensity values accurately. NURBS surfaces are generated through the interpolation of the cloud points. Performance of the developed system is to be confirmed through the realization of Mona Lisa and Golden Gate Bridge.