• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.157-169
• /
• 2002

In the initial stages of ship design, designers represent geometry, arrangement, and dimension of hull structures with 2D geometric primitives such as points, lines, arcs, and drawing symbols. However, these design information(‘2D geometric primitives’) defined in the drawing sheet require more intelligent translation processes by the designers in the next design stages. Thus, the loss of design semantics could be occurred and following design processes could be delayed. In the initial design stages, it is not easy to adopt commercial 3D CAD systems, which have been developed f3r being used in detail and production design stages, because the 3D CAD systems require detailed input for geometry definition. In this study, a semantic product model data structure was proposed, and an initial structural CAD system was developed based on the proposed data structure. Contents(‘product model data and design knowledges’) of the proposed data structure are filled with minimal input of the designers, and then 3D solid model and production material information can be automatically generated as occasion demands. Finally, the applicability of the proposed semantic product model data structure and the developed initial structural CAD system was verified through application to deadweight 300,000ton VLCC(Very Large Crude oil Carrier) product modeling procedure.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.107-121
• /
• 2018

This study investigates the effects of the Kano model on the product quality and quality satisfaction on the FDM low cost 3D printer, which is used by consumer and makers. 3D printer product quality is analyzed in terms of functionality, usability, durability, reliability and safety based on the inherent quality of the product itself. This study were tested using Kano analysis to calculate the product detail characteristics and Timko coefficient to calculate the degree of satisfactory effects of the 3D printer. As a result, this study becomes product size, the output speed, durability against external impact as attractive quality and the safety part is regarded as One-dimensional quality. With the exception of surface resolution, the Timko customer satisfaction index was the same as the Kano model.

• IE interfaces
• /
• v.24 no.1
• /
• pp.58-70
• /
• 2011

As more individuals and organizations participate in the complex design process of manufacturing industry, collaborative product development and management of the global supply chain have become more popular. Although the product quality concerns once focused on the manufacturing process, they are now directed at earlier stages of the design cycle where the engineering product is created as a 3D CAD model. In this paper, we describe the current state of product data quality activities in the manufacturing industry and the yardstick to measure 3D CAD data quality. Moreover we introduce a quality assurance method through the result of statistical analysis of 3D CAD models and suggest a six sigma level of CAD data quality by analyzing 76 samples provided from three Korean automotive companies.

• The KIPS Transactions:PartA
• /
• v.18A no.3
• /
• pp.81-92
• /
• 2011

There has been a number of attempts to apply 3D CAD data created in the design stage of product life cycle to various applications of the other stages in related industries. But, 3D CAD data requires a large amount of computing resources for data processing, and it is not suitable for post applications such as distributed collaboration, marketing tool, or Interactive Electronic Technical Manual because of the design information security problem and the license cost. Therefore, various lightweight visualization formats and application systems have been suggested to overcome these problems. However, most of these lightweight formats are dependent on the companies or organizations which suggested them and cannot be shared with each other. In addition, product structure information is not represented along with the product geometric information. In this paper, we define a dataset called prod-X3D(Enhanced X3D Dataset for Web-based Visualization of 3D CAD Product Model) based on the international standard graphic format, X3D, which can represent the structure information as well as the geometry information of a product, and propose a translation method from 3D CAD data to an prod-X3D.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2012

A 3D scanner scans and captures the shape of a real-world object. The captured shape can be used to construct three-dimensional model for CAD/CAM applications. In this study we have tried to design a cell phone cover by using the 3D scanner and reverse engineering. A 3D scanner is used to capture the shape of a cell phone. The 3D scanner generates a point cloud as the shape information. A three-dimensional CAD model for the cell phone is constructed from the point cloud. A cell phone cover is designed based on the CAD model of the cell phone. To check the integrity of this design process a prototype of the cover is made and assembled with the cell phone.

• Journal of Engineering Education Research
• /
• v.25 no.1
• /
• pp.46-54
• /
• 2022

This study attempted non-face-to-face collaborative product development practice that can respond to the spread of COVID-19 by expanding existing product data management system-based product development practice. For the complete non-face-to-face product development practice, it utilized prototype development using a 3D paper model, an online class management system and social media for classes and meetings. As a result of applying the non-face-to-face method, product developments of 26 practice teams have been completed without any failures. Therefore, through this study, the author can confirm that it is possible to provide the complete non-face-to-face collaborative product development practice based on product data management systems.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2013

This study utilizes a S-O-R model to investigate the effects of apparel product presentations using a 3D avatar model in Internet fashion malls for pleasure(emotional state) and approach behavior. We chose a 3D avatar model to present a fashion product in this study. The model walked for about one minute on stage; subsequently, respondents completed a questionnaire after they viewed it. The questionnaire consists of telepresence, pleasure and approach behavior. Respondents are limited to females 20s and 30s years old who have purchased fashion products in an Internet mall and are highly interested in fashion products. A total of 226 samples were used for the final analysis. Cronbach's alpha, correlation analysis, confirmatory factor analysis, and structural equation modeling were utilized in this study. The results are as follows. First, telepresence has a significant influence on pleasure; subsequently, pleasure influenced consumer approach behavior. Second, telepresence positively influenced the approach behavior (directly and indirectly). This verified the effectiveness of a 3D avatar model using S-O-R. A 3D avatar model can be a strategic alternative in the fiercely competitive Internet shopping sector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5385-5391
• /
• 2013

As on-line purchases is activated, customers' demand increases for the realistic and accurate digital information of a product design. In this paper, we propose a practical method that can generate a realistic 3D model of a real product using a 3D geometry obtained by a 3D scanner and its photographic images. In order to register images to the 3D geometry, the camera focal length, the CCD scanning aspect ratio and the transformation matrix between the camera coordinate and the 3D object coordinate must be determined. To perform this 2D-3D registration with consideration of computational complexity, a three-step method is applied, which consists of camera calibration, determination of a temporary optimum translation vector (TOTV) and nonlinear optimization for three rotational angles. A case study for a metallic coated industrial part, of which the colour appearance is hardly obtained by a 3D colour scanner has performed to demonstrate the effectiveness of the proposed method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.146-153
• /
• 2012

RP system which is widely used to reduce the time of product development is to resolve the problem of cutting work. It is a method using laminated thin films to produce many forms. The RP equipment used for this experiment is FDM system. This can produce 3D model with using 3D CAD designed file within a relatively short time. Not only this, this system also through 3D file preparation, 3D product manufacture, removal support these 3 step operating process can easily produce goods, but product can be different from original design. This research has been conducted to minimize this error. To apply to the circular product made a circular specimen and measured several times with 3D scanner and find out average 99.622% of accuracy. This result is applied to RP system, and with this changed design produced a specimen, and found out the accuracy is increased to 99.958%. If this is applied to circular products, we can produce more precise products with less process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1505-1510
• /
• 2018

Product modeling technology for graphics is rapidly developing. And 3D data application and usability are increasing.modeling of product design is a very important factor in constructing. 3D modeling in product design takes a lot of production time. Recently, the reverse design method is very useful because of application of 3D data and shortening of production time. In this study, first, 3D point cloud and mesh data are generated using photographs based on image data. The second is to modify the design and the third is to make the prototype with the 3D printer. This product design and production process suggests the utilization and possibility of image data, the shortening of 3D modeling production time and efficient processes. Also, the product design process proposes a model of a new product development system to adapt to the production environment.