• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.107-114
• /
• 2004

4D 모델은 프로젝트 수행 이전에 다양한 공정대안을 비교 검토해볼 수 있는 기능을 제공하나 아직 그 활용이 미비한 실정이다. 이는 4D 모델의 구현에 수반되는 기술적, 경제적 문제에 기인하는 바 크다. 본 논문에서는 3D모델 정보의 활용을 통해 이러한 문제의 해결방안을 제시하였다. 즉, 기 생성된 3D 모델 정보를 가공하여 동일한 3D 모델에 대해 여러 가지 공정대안을 신속하게 생성해내는 공정 자동생성 기능을 이용함으로써 기존 4D시스템 연구에서 문제점으로 지적되었던 정보 변경에 따른 4D 모델 재구현 문제를 상당부분 개선하였다. 또한, 특정 작업기간에 따른 소요물량을 간편하게 산출해내는 물량정보 검색 기능을 통해 4D 모델의 대안검토 기능을 보완하였다. 특히 공정 자동생성 기능에서는 수평 및 수직적 우선순위의 조정을 통해 부재간, 층간 우선순위를 결정할 수 있도록 함으로써 공정순서를 신속하게 생성해낼 수 있는 환경을 제공하였다. 이것은 3D 모델이 변경되지 않은 상태에서 다양한 공정대안의 신속한 생성을 통한 비교 검토에 효과적으로 활용할 수 있으며, 3D 모델이 변경된 경우에도 4D 모델 생성을 위한 이후의 작업과정을 손쉽게 진행시켜 나갈 수 있는 장점이 있다. 아울러 3D 모델로부터 생성되는 물량정보와 공정계획 결과로부터 생성되는 일정정보를 연계시킴으로써 간편하게 일정별 소요물량 정보를 검색할 수 있게 하였다.

• Journal of Periodontal and Implant Science
• /
• 제44권4호
• /
• pp.184-193
• /
• 2014

Purpose: The aim of the present study was to evaluate the in vivo accuracy of flapless, computer-aided implant placement by comparing the three-dimensional (3D) position of planned and placed implants through an analysis of linear and angular deviations. Methods: Implant position was virtually planned using 3D planning software based on the functional and aesthetic requirements of the final restorations. Computer-aided design/computer-assisted manufacture technology was used to transfer the virtual plan to the surgical environment. The 3D position of the planned and placed implants, in terms of the linear deviations of the implant head and apex and the angular deviations of the implant axis, was compared by overlapping the pre- and postoperative computed tomography scans using dedicated software. Results: The comparison of 14 implants showed a mean linear deviation of the implant head of 0.56 mm (standard deviation [SD], 0.23), a mean linear deviation of the implant apex of 0.64 mm (SD, 0.29), and a mean angular deviation of the long axis of $2.42^{\circ}$ (SD, 1.02). Conclusions: In the present study, computer-aided flapless implant surgery seemed to provide several advantages to the clinicians as compared to the standard procedure; however, linear and angular deviations are to be expected. Therefore, accurate presurgical planning taking into account anatomical limitations and prosthetic demands is mandatory to ensure a predictable treatment, without incurring possible intra- and postoperative complications.

• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.90-94
• /
• 2014

Reconstruction of the mandible after ablative oral cancer surgery requires esthetic and functional rehabilitation. Restoring facial symmetry and dentition need accurate preoperative surgical planning and meticulous surgical technique. Free fibular flap is most useful tools to reconstruct mandible because of its adequate length and height, simultaneous harvest of soft and hard tissues and placing dental implants. In this case report, recurred squamous cell carcinoma in the right mandible had been resected and free fibular flap was utilized for mandible reconstruction using 3D rapid prototype. Simulation surgery before dental implant placement has been performed for esthetic and functional prosthodontics.

• 한국컴퓨터정보학회논문지
• /
• 제16권6호
• /
• pp.1-10
• /
• 2011

멀티코어 프로세서를 설계하는데 있어서 구성요소들을 연결하는 와이어 길이의 증가로 인한 지연 현상은 성능향상에 큰 걸림돌이 되고 있다. 멀티코어 프로세서의 와이어 지연 문제를 해결하기 위하여 최근에는 3차원 구조의 멀티코어 프로세서 설계 기술이 많은 주목을 받고 있다. 3차원 구조 멀티코어 프로세서 설계 기술은 코어들을 수직으로 적층함으로써, 물리적인 연결망 길이를 크게 감소시켜 성능향상과 함께 연결망에서 소비되는 전력을 줄일 수 있다. 하지만 많은 전력을 소모하는 회로를 수직으로 적층함으로써 전력밀도가 증가하여 프로세서 내부의 온도가 크게 상승하는 문제를 가지고 있다. 본 논문에서는 3차원 구조 멀티코어 프로세서에서의 발열문제를 해결 할 수 있는 플로어플랜 방법을 제안하기 위해 칩 내부에 적층되는 코어의 수직적 배치 형태를 다양하게 변화시키면서 그에 따른 온도 변화를 살펴보고자 한다. 실험 결과를 통해, 프로세서 내부의 온도 감소를 위해서는 코어와 L2 캐쉬를 수직으로 인접하게 적층함으로써 코어의 온도를 낮추는 기법이 매우 효과적임을 알 수 있다. 코어와 코어가 수직으로 상호 인접하는 플로어플랜과 비교하여, 코어와 L2 캐쉬를 수직으로 인접하게 배치시키는 기법이 4-레이어 구조의 경우에는 평균 22%, 2-레이어 구조의 경우 평균 13%의 온도 감소 효과를 보임을 알 수 있다.

• Korean Journal of Mathematics
• /
• 제29권3호
• /
• pp.581-591
• /
• 2021

In this paper, we discuss and investigate the existence of the inclusion L^p(.),𝜃 (𝜇) ⊆ L^q(.),𝜃 (𝜈), where 𝜇 and 𝜈 are two finite measures on (X, Σ). Moreover, we show that the generalized variable exponent grand Lebesgue space L^p(.),𝜃 (Ω) has a potential-type approximate identity, where Ω is a bounded open subset of ℝ^d.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.85-89
• /
• 2011

PURPOSE. The purpose of this study was to evaluate the amount of resorption and thickness of labial bone in anterior maxillary implant using cone beam computed tomography with Hitachi CB Mercuray (Hitachi, Medico, Tokyo, Japan). MATERIALS AND METHODS. Twenty-one patients with 26 implants were followed-up and checked with CBCT. 21 OSSEOTITE $NT^{(R)}$. (3i/implant Innovations, Florida, USA) and 5 $OSSEOTITE^{(R)}$. implants (3i/implant Innovations, Florida, USA) were placed at anterior region and they were positioned vertically at the same level of bony scallop of adjacent teeth. Whenever there was no lesion or labial bone was intact, immediate placement was tried as possible as it could be. Generated bone regeneration was done in the patients with the deficiency of hard tissue using $Bio-Oss^{(R)}$. (Geistlich, Wolhusen, Switzerland) and $Bio-Gide^{(R)}$. (Geistlich, Wolhusen, Switzerland). Second surgery was done in 6 months after implant placement and provisionalization was done for 3 months. Definite abutment was made of titanium abutment with porcelain, gold and zirconia, and was attached after provisionalization. Two-dimensional slices were created to produce sagittal, coronal, axial and 3D by using OnDemand3D (Cybermed, Seoul, Korea). RESULTS. The mean value of bone resorption (distance from top of implant to labial bone) was $1.32 \;{\pm}\; 0.86\; mm$ and the mean thickness of labial bone was $1.91 \;{\pm}\; 0.45 \;mm$. CONCLUSION. It is suggested that the thickness more than 1.91 mm could reduce the amount and incidence of resorption of labial bone in maxillary anterior implant.

• Korean Journal of Radiology
• /
• 제1권2호
• /
• pp.65-72
• /
• 2000

Objective: To compare the efficacy of suprapapillary and transpapillary methods of transhepatic biliary metallic stent placement in malignant biliary strictures and to specify the indications of each method applied. Materials and Methods: Stents were placed in 59 patients. Strictures were categorized as type A (within 3 cm of the ampulla, n = 27), type B (over 3 cm from ampulla, n = 7), type C (within 3 cm of the bending portion, n = 9), or type D (over 3 cm above the bending portion, n=16). The stenting method was suprapapillary in 34 cases and transpapillary in 25. The rates of initial and long-term patency and of early recurrence were compared. Results: Initial patency rates for the suprapapillary and transpapillary methods were 1/7 (14.3%) and 20/20 (100%) respectively for type A (p < 0.0001), 4/5 (80.0%) and 2/2 for type B, 3/7 (42.9%) and 2/2 for type C, and 15/16 (93.8%) and 0/0 for type D. Early recurrence rates were 7/30 (23.3%) using the suprapapillary method and 4/29 (13.8%) using the transpapillary method (p = 0.51). The long-term patency rate did not differ significantly according to either type (p = 0.37) or method (p = 0.62). Conclusion: For good initial patency, the transpapillary method is recommended for strictures of the distal extrahepatic duct near the ampulla and just above the bending portion. Long-term patency is not influenced by the stenting method employed.

• Journal of Korean Neurosurgical Society
• /
• 제47권3호
• /
• pp.185-190
• /
• 2010

Objective : The aneurysm remnants rate was evaluated via three-dimensional digital subtraction angiography (3D-DSA) in the postoperative evaluation of clipped aneurysms. Methods : Data on surgically clipped aneurysms of anterior circulation obtained via postoperative 3D-DSA from February 2007 to March 2009 were gathered. The results of the postoperative 3D-DSA and of two-dimensional digital subtraction angiography (2D-DSA) for the detection of aneurysm remnants were compared, and an investigation was performed as to why 2D-DSA had missed some aneurysm remnants that were detected in the 3D-DSA. Various surgical factors that revealed aneurysm remnants in the 3D-DSA were also evaluated. Results : A total of 39 neck remnants of 202 clipped aneurysms (19.3%) were confirmed in 3D-DSA, and these were classified according to Sindou's classification of aneurysm remnants. Patients with only a neck remnant found in the 3D-DSA represented 17.3% (35/202 aneurysms) of the whole series, and those with a residuum of neck plus sac found in the 3D-DSA represented 1.9% (4/202 aneurysms). The causes of aneurysm remnants were no full visualization (14/39, 35.9%), parent and perforator artery protection (10/39, 25.6%), clip design problems (8/39, 20.5%), and broadnecked aneurysm (7/39, 17.9%). Conclusion : Patients with ${\leq}2$mm aneurysm remnants showed an increased risk of undetectable aneurysm remnants in the 2D-DSA. The most frequent location of the missed aneurysm in 2D-DSA was the anterior communicating artery. 3D-DSA showed more aneurysm remnants than what is indicated in the existing literature, the 2D-DSA.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.709-721
• /
• 2019

This paper investigates the framework of vision-based dense displacement and strain measurement of miter gates with the approach for the quantitative evaluation of the expected performance. The proposed framework consists of the following steps: (i) Estimation of 3D displacement and strain from images before and after deformation (water-fill event), (ii) evaluation of the expected performance of the measurement, and (iii) selection of measurement setting with the highest expected accuracy. The framework first estimates the full-field optical flow between the images before and after water-fill event, and project the flow to the finite element (FE) model to estimate the 3D displacement and strain. Then, the expected displacement/strain estimation accuracy is evaluated at each node/element of the FE model. Finally, methods and measurement settings with the highest expected accuracy are selected to achieve the best results from the field measurement. A physics-based graphics model (PBGM) of miter gates of the Greenup Lock and Dam with the updated texturing step is used to simulate the vision-based measurements in a photo-realistic environment and evaluate the expected performance of different measurement plans (camera properties, camera placement, post-processing algorithms). The framework investigated in this paper can be used to analyze and optimize the performance of the measurement with different camera placement and post-processing steps prior to the field test.

• 디지털콘텐츠학회 논문지
• /
• 제19권4호
• /
• pp.815-819
• /
• 2018

본 논문에서는 Foot Placement Estimator (FPE)를 사용하여 point foot을 갖는 이족 로봇의 3차원 시뮬레이션을 진행하고 이족로봇의 균형유지를 연구하였다. FPE 방법은 에너지 보존에 근거한 제어 방법으로서 보행 중인 로봇의 모든 에너지가 위치 에너지로 변환되는 지점에 로봇이 발을 디뎌 몸체가 넘어지지 않고 균형을 유지하며 이동하도록 하는 제어방법이다. 본 연구에서는 로봇이 이동하지는 않고 제자리에서 균형을 유지하며 서 있는 시뮬레이션을 진행하였다. 이를 위해 point foot을 갖는 6자유도 이족 로봇을 모델링하였으며 바닥과의 접촉 및 마찰 환경을 구현하였다. 로봇의 무게는 1kg이며 지면과 무게 중심점과의 거리는 1m로, 무게중심점은 로봇 몸체의 정 중앙에 위치하도록 설계하였다. 다음으로 로봇 몸체의 각속도와 직선속도 그리고 무게 중심점의 높이로 부터 FPE 지점을 계산하고 로봇이 해당 지점을 디뎌 균형을 유지하게 끔 하였다. 몸체의 초기 각도를 $5^{\circ}$, $-5^{\circ}$로 변화시키며 시뮬레이션 한 결과, 모든 초기 조건에서 로봇이 쓰러지지 않고 자세의 균형을 유지하며 서 있는 것을 확인할 수 있었다.