• 패션비즈니스
• /
• 제20권3호
• /
• pp.30-42
• /
• 2016

The objective of this study was to perform 3D solid modeling from 3D scanned surface images of cotton and silk in order to calculate the thermal heat transfer responses using numerical simulations. Continuing from the previous methodology, which provided 3D surface data for a fabric through optical measurements of the fabric microstructure, a simplified 3D solid model, containing a defined unit cell, pattern unit and fabric structure, was prepared. The loft method was used for 3D solid-model generation, and heat transfer calculations, made for the fabric, were then carried out using the 3D solid model. As a result, comprehensive protocols for 3D solid-model generation were established based on the optical measurements of real fabric samples. This method provides an effective means of using 3D information for building 3D models of actual fabrics and applying the model in numerical simulations. The developed process can be used as the basis for other analogous research areas to investigate the physical characteristics of any fabrics.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.73-83
• /
• 2016

PURPOSES : The purpose of this study is to develop a method for improving the accuracy of analysis results obtained from a two-dimensional (2-D) numerical analysis model of continuously reinforced concrete pavement (CRCP). METHODS : The analysis results from the 2-D numerical model of CRCP are compared with those from more rigorous three-dimensional (3-D) models of CRCP, and the relationships between the results are recognized. In addition, the numerical analysis results are compared with the results obtained from field experiments. By performing these comparisons, the calibration factors used for the 2-D CRCP model are determined. RESULTS : The results from the comparisons between 2-D and 3-D CRCP analyses show that with the 2-D CRCP model, concrete stresses can be overestimated significantly, and crack widths can either be underestimated or overestimated by a slight margin depending on the assumption of plane stress or plane strain. The behaviors of crack width in field measurements are comparable to those obtained from the numerical model of CRCP. CONCLUSIONS : The accuracy of analysis results from the 2-D CRCP model can be improved significantly by applying calibration factors obtained from comparisons with 3-D analyses and field experiments.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1287-1292
• /
• 2007

Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze 1D or 2D stream flow that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed 3D numerical analysis for correct stream flow interpretation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimenson RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as ${\kappa}-{\varepsilon}$, RNG ${\kappa}-{\varepsilon}$ and LES. Those numerical analysis results have been illustrated by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows around the piers at Jangwall bridge in urbarn stream.

• Geomechanics and Engineering
• /
• 제14권3호
• /
• pp.293-299
• /
• 2018

This paper has the aim of estimating the applicability of a numerical approach to the Hyperstatic Reaction Method (HRM) for the analysis of segmental tunnel linings. For this purpose, a simplified three-dimensional (3D) numerical model, using the $FLAC^{3D}$ finite difference software, has been developed, which allows analysing in a rigorous way the effect of the lining segmentation on the overall behaviour of the lining. Comparisons between the results obtained with the HRM and those determined by means of the simplified 3D numerical model show that the proposed HRM method can be used to investigate the behaviour of a segmental tunnel lining.

• Steel and Composite Structures
• /
• 제15권3호
• /
• pp.247-266
• /
• 2013

This paper presents a comparison of results obtained by a newly developed numerical model for predicting the behaviour of structures under fire with experimental study carried out on heated and simply supported steel beam elements. A newly developed numerical model consists of three submodels: 3D beam model designed for calculating the inner forces in the structure, 2D model designed for calculation of stress and strain distribution over the cross section, including the section stiffness, and 3D transient nonlinear heat transfer model that is capable of calculating the temperature distribution along the structure, and the distribution over the cross section as well. Predictions of the calculated temperatures and vertical deflections obtained by the numerical model are compared with the results of the inhouse experiment in which steel beam element under load was heated for 90 minutes.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.245-250
• /
• 2002

In this paper we presented numerical method for the simulation of powder injection molding filling process, which is one of the key processes in powder injection molding. Rheological properties of powder binder mixture such as slip phenomena and yield stress were introduced into the numerical analysis model of powder injection molding filling simulation. Numerical model can be classified into two types. One is 2.5D model which can be introduced to a arbitrary thin geometry and the other is full 3D model which can be applied to a general 3D shape. For 2.5D model we showed the validity of our CAE system with several verification examples. Finally we suggested flow analysis model for 3D powder injection molding filling simulation.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.859-871
• /
• 2014

본 연구에서는 염분과 온도차에 의한 밀도류를 해석하기 위하여 기존의 3차원 파동장 모델(LES-WASS-3D ver. 1.0)을 토대로 염분과 온도에 관한 상태방정식 및 3차원 이류-확산 방정식을 도입하여 새로운 수치모델(LES-WASS-3D ver. 2.0)을 개발하였다. 새롭게 개발한 수치모델의 적용성을 검토하기 위하여 기존의 수리모형실험결과와 비교 분석하였다. 그 결과, 이류-확산하는 해수의 형태 및 연직 염분농도 뿐만 아니라 방출하는 온수의 유속 및 온도를 매우 잘 재현하는 것으로 나타났다. 이로써 본 연구에서 개발한 수치모델의 타당성 및 유효성이 검증되었다.

• Wind and Structures
• /
• 제7권1호
• /
• pp.13-28
• /
• 2004

A method of numerical analysis without conducting 3D wind tunnel model tests was examined in our previous study for predicting vortex-induced oscillation of bridge girders with span-wise varying geometry. The aerodynamic damping forces measured for plural wind tunnel 2D models were used in the analysis. A further study was conducted to examine the precision of solution obtained by this method. First, the responses of vortex-induced oscillation of two rocking models and a taut-strip bridge girder model with span-wise varying geometry were measured. Next, the responses of these models were numerically analyzed by means of this method, and then a comparison was made between the obtained $Vr-A-{\delta}_a$ contour diagram of each 3D model in the wind tunnel test and the diagram in the numerical analysis. Since close correlations were observed between each two $Vr-A-{\delta}_a$diagrams obtained in the model test and in the analysis in cases where the 3D model did not have strong three-dimensionality, our findings revealed that the predicted solution proved to be reasonably accurate.

• 한국해안해양공학회지
• /
• 제18권4호
• /
• pp.383-389
• /
• 2006

소파호안과 같은 해역구조물을 통한 월파량 산정에 수치해석기법을 적용하기 위하여 투과성 구조물의 취급 및 쇄파현상의 재현이 가능한 수치해석기법을 발판으로 하여 쇄파발생으로 인한 기포의 유입과 호안 배후의 월파로 인한 물방울의 자유낙하 및 사면유하 등을 고려할 수 있는 기법을 추가한 새로운 3차원 수치해석기법을 제안하여, 기존의 수리모형실험과 비교함으로써 그 타당성을 검증하였다. 소파호안을 대상으로 Ursell 수($=L^2H/h^3$)가 커질수록 3차원 계산에 의해 얻어지는 월파유량은 증가하였으며 실험결과와도 잘 일치하고 있는 것을 확인하였다. 또한, 월파량 산정에 2차원 및 3차원수치해석기법을 이용할 경우의 차이점에 관하여 논의하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1726-1731
• /
• 2006

본 연구에서는 임하다목적댐의 비상여수로 설계를 위하여 수리모형실험과 수치모형실험을 수행하였다. 수치모의에는 3차원 수치모형인 FLOW-3D를 사용하였다. 비상여수로 설계를 위하여 접근수로부, 월류웨어부, 천이부 및 도류부, 그리고 감세부로 나누어 수리모형실험과 수치모형실험의 수리현상 결과를 비교하였다. 최적의 비상여수로 설계를 위하여 기본계획안에 대하여 모의하고 이에 대한 보완점과 문제점들을 찾아내고 해결책을 제시하였다. 수치모의를 통하여 수리모형실험에서 쉽게 수행하기 어려운 다양한 조건을 모의하고 최적의 결과에 찾아 이를 수리모형실험으로 검증함으로써 비상여수로 기본설계안을 도출하였다.