• 한국의류학회지
• /
• 제37권8호
• /
• pp.1075-1094
• /
• 2013

This study analyzed the lower body type of women aged 20 to 30 to understand their respective characteristics. The research method was restricted to the use of direct measurements data and 3D measurements data of the Sixth Size Korea. Factor analysis, cluster analysis, ANOVA, Duncan's test, discriminant analysis, t-test, and ${\chi}^2$-test were performed for the statistical analysis of the data using SPSS Win 20.0 program. The results of this study are as follows. Lower body type based on 3D measurements were classified into 3 types (obese lower body, long lower body, and small lower body). Lower body type based on direct measurements were classified into 3 types (obese lower body, thick and long lower body, and small lower body). Lower body type based on the direct measurement of sitting pose were classified into 3 types (obese lower body, long and thin lower body, and short lower body). The age differences in the lower body types could be analyzed by an evaluation of the 3D simulation of the lower body.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.911-913
• /
• 2004

This paper presents characteristic analysis of claw-pole type generator. The analysis is performed using 2D equivalent model by 2D FEM. 3D FEM is used to check whether 2D equivalent model reflects the magnetic characteristics of the actual machine. Initially, 2D equivalent model of the claw-pole type generator is designed only by 3D geometry. Using 2D equivalent model, back emf characteristics are estimated and compared to measurements. The analysis results agree with measurements well and take less time comparing to 3D FEM.

• 한국의류학회지
• /
• 제43권6호
• /
• pp.930-940
• /
• 2019

This study analyzes the facial data required for sheet design in order to pursue the facial compatibility of disposable sheets used in facial mask products that are increasing in popularity as self-care methods. The subjects of the study were 23 facial measurements of 1,001 women in their 20s to 60s from Size Korea's 6th 3D data. Through factor analysis, sheet-related facial measurements were collected into six factors included in the vertical length of each part of the face: length of face surface from the ear to each part of the face, width of eyes, nose, lips, length of nose, vertical length of lower face, width of the head and width of chin. Three sheet face types were classified using six factor scores as variables, and the characteristics of each type differed according to age group. As a result of the discriminant analysis to identify the dimension items that classify the three cluster types, 12 contributing items were extracted out of 23 items. This study provides useful information and data for further studies of products requiring facial fitness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1211-1224
• /
• 2004

Two round jets. impinged and pulsed. were measured with high-resolution 3D-PTV technique. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. Two fitness functions were introduced in a genetic algorithm in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The velocity profiles of the impinged jet obtained by the constructed 3D-PTV system were compared with those of LDV measurements made in this study. The head vortex of the jet was visualized by LIF and was reconstructed by the constructed high-resolution 3D-PTV system for comparisons.

• 한국방사선학회논문지
• /
• 제17권3호
• /
• pp.315-325
• /
• 2023

본 연구는 복부 비만도에 따라 콩팥 크기의 상관관계를 분석하여 3차원 전산화단층영상(3-Dimensional Computed Tomography, 3D CT)의 콩팥 크기 계측으로 복부 비만도를 예측하고자 하였다. 대상자는 전주 예수병원 건강의학센터에서 종합검진을 받은 자로 기저질환이 없는 건강한 성인 178명으로 하였다. 복부 비만도는 CT의 배꼽 주변의 횡단면에서 내장지방 면적, 피하지방 면적, 비만도로 구분하여 측정하였다. 복부 비만도 간에 따라 분류한 콩팥 크기의 평균 비교는 일원배치 분산분석(One-way analysis of variance, ANOVA) 및 Scheffe 사후 검정을 통해 시행하였다. 모든 계측 값의 상관관계는 Pearson 상관분석 하였다. 그 결과 복부 비만도에 따른 콩팥 크기 ANOVA 분석 결과는 다음과 같다. 내장 지방도 간에 따른 콩팥 계측치의 평균은 모든 콩팥 계측치에서 유의한 차이가 있었다(p<0.05). 피하 지방도 간에 따른 콩팥 계측치의 평균은 3D CT 우측 콩팥 너비 계측 시 중증 비만군에서 유의한 차이를 보였다(p<0.05). 비만도 간에 따른 콩팥 계측치의 평균은 3D CT 우측 콩팥 너비와 좌측 콩팥 너비 계측 시 중증 비만군에서 유의한 차이를 보였다(p<0.05). 콩팥 계측치와 CT 복부 비만도 간의 Pearson 상관분석 결과 내장지방 면적은 3D CT 좌측 콩팥 너비와 상대적으로 높은 양의 상관관계(r=0.467)를 보였으며 피하지방 면적은 3D CT 우측 콩팥 너비와 양의 상관관계(r=0.249)를 보였다. 비만도에서는 3D CT 좌측 콩팥 너비와 양의 상관관계(r=0.291)를 보였다.

• International Journal of Human Ecology
• /
• 제14권1호
• /
• pp.41-55
• /
• 2013

The purpose of this study was to analyze human upper body surface changes at the shoulder and back area. The body surface data were analyzed in terms of muscle and bone displacement in dynamic postures. Body surface data were collected with a 3D body scanner. The body surface was scanned at the static and four baseball batting postures. The body surface dimensions over the deltoids, scapulae and trapezius were measured. The results show that the vertical measurements of the deltoids increased by 20%. The horizontal measurements of the axilla of the back increased. The surface of the trapezius was elongated by over 10%, and the lower back musculature was elongated by about 50%. The results of this study showed that changes in back body surface caused by upper arm movements. It was influenced by the deltoid articulated with the humeri and the scapulae and trapezius. These body surface changes caused by muscle activities and ranges of motion can be used to design functional clothing.

• 한국유체기계학회 논문집
• /
• 제10권4호
• /
• pp.47-54
• /
• 2007

Simultaneous 3-D LDV measurements of the in-cylinder flows of three different engine setups were summarized for the quantification of the flow characteristics in each vertical or horizontal plane, and in entire cylinder volume. The ensemble averaged-velocity, tumble and swirl motions, and turbulent kinetic energy during the intake and compression strokes were examined from the measured velocity data (approximately 2,000 points for each engine setup). The better spatial resolution of the 3-D LDV allows measurements of the instantaneous flow structures, yielding more valuable information about the smaller flow structures and the cycle-to-cycle variation of these flow patterns. Tumble and swirl ratios, and turbulent kinetic energy were quantified as planar and volumetric quantities. The measurements and calculation results were animated for the visualization of the flow, and hence ease to analysis.

• Applied Microscopy
• /
• 제46권2호
• /
• pp.71-75
• /
• 2016

The scanning electron microscope (SEM) offers two-dimensional (2D) micrographs of three-dimensional (3D) objects due to its inherent operating mechanisms. To overcome this limitation, other devices have been used for quantitative morphological analysis. Many efforts have been made on the applications of software-based approaches to 3D reconstruction and measurements by SEM. Based on the acquisition of two stereo images, a multi-view technique consists of two parts: (i) geometric calibration and (ii) image matching. Quantitative morphological parameters such as height and depth could be nondestructively measured by SEM combined with special software programs. It is also possible to obtain conventional surface parameters such as roughness and volume of biomedical specimens through 3D SEM surface reconstruction. There is growing evidence that conventional 2D SEM without special electron detectors can be transformed to 3D SEM for quantitative measurements in biomedical research.

• Imaging Science in Dentistry
• /
• 제33권3호
• /
• pp.171-178
• /
• 2003

Purpose: The purpose of this study was to report the reproducibility of intra-observer and inter-observer consistency of cephalometric measurements using three-dimensional (3D) computed tomography (CT), and the degree of difference of the cephalometric measurements. Materials and Methods: CT images of 16 adult patients with normal class I occlusion were sent to personal computer and reconstructed into 3D images using V-Works 3.5/sup TM/(Cybermed Inc., Seoul, Korea). With the internal program of V-Works 3.5/sup TM/, 12 landmarks on regular cephalograms were transformed into 21 analytic categories and measured by 2 observers and in addition, one of the observers repeated their measurements. Intra-observer difference was calculated using paired t-test, and inter-observer by two sample test. Results: There were significant differences in the intra-observer measurements (p < 0.05) in four of the categories which included ANS-Me, ANS-PNS, Cdl-Go (Lt), GoL-GoR, but with the exception of Cdl-Go (Lt), ZmL-ZmR, Zyo-Zyo, the average differences were within 2 mm of each other. The inter-observer observations also showed significant differences in the measurements of the ZmL-ZmR and Zyo-Zyo categories (p < 0.05). With the exception of the Cdl-Me (Rt), ZmL-ZmR, Zyo-Zyo categories, the average differences between the two observers were within 2 mm, but the ZmL-ZmR and Zyo-Zyo values differed greatly with values of 8.10 and 19.8 mm respectively. Conclusion: In general, 3D CT images showed greater accuracy and reproducibility, with the exception of suture areas such as Zm and Zyo, than regular cephalograms in orthodontic measurements, showing differences of less than 2 mm, therefore 3D CT images can be useful in cephalometric measurements and treatment planning.

• 대한두개안면성형외과학회지
• /
• 제14권1호
• /
• pp.11-15
• /
• 2013

Background: In cleft lip patients, the necessity of a thorough preoperative analysis of facial deformities before reconstruction is unquestioned. The surgical plan of cleft lip patient is based on the information gained from our preoperative anthropometric evaluation. A variety of commercially available three-dimensional (3D) surface imaging systems are currently introduced to us in plastic surgery for these use. However, few studies have been published on the soft tissue morphology of unrepaired cleft infants described by these 3D surface imaging systems. Methods: The purpose of this study is to determine the accuracy of facial anthropometric measurements obtained through digital 3D photogrammetry and to compare with direct anthropometry for measurement in unilateral cleft lip patients. We compared our patients with three measurements of dimension made on both sides: heminasal width, labial height, and transverse lip length. Results: The preoperative measurements were not significantly different in both side of labial height and left side of heminasal width. Statistically significant differences were found on both side of transverse lip length and right side of heminasal width. Although the half of preoperative measurements were significantly different, trends of results showed average results were comparable. Conclusion: This is the first study in Korea to simultaneously compare digital 3D photogrammetry with traditional direct anthropometry in unilateral cleft lip patients. We desire this study could contribute the methodological choice of the many researchers for proper surgical planning in cleft lip reconstruction field.