3차원 순차적 집적회로에서 열에 의한 손상으로 생성되는 계면 포획 전하가 트랜지스터의 드레인 전류-게이트 전압 특성에 미치는 영향을 소개한다. 2차원 소자 시뮬레이터를 이용해서 산화막 층에 계면 포획 전자 분포를 추출한 결과를 설명한다. 이 계면 포획 전자분포를 고려한 3차원 순차적 집적회로에서 Inter Layer Dielectric (ILD)의 길이에 따른 하층 트랜지스터의 게이트 전압의 변화에 따라서 상층 트랜지스터의 문턱전압 $V_{th}$의 변화량에 대해서 소개한다. 상대적으로 더 늦은 공정인 상층 $HfO_2$층 보다 하층 $HfO_2$층과 양쪽 $SiO_2$층이 열에 의한 영향을 더 많이 받았다. 계면 포획 전하 밀도 분포를 사용하지 않았을 때 보다 사용 했을 때 $V_{th}$ 변화량이 더 적게 변하는 것을 확인 했다. 3차원 순차적 인버터에서 ILD의 길이가 50nm이하로 짧아질수록 점점 더 $V_{th}$ 변화량이 급격히 증가하였다.
본 논문에서는 3차원 얼굴 스캔 데이터와 사진 이미지를 이용하여 고화질의 3차원 얼굴 모델과 모핑 애니메이션을 생성하는 시스템 개발에 대해 기술한다. 본 시스템은 얼굴 특징점 입력 도구, 얼굴 텍스처매핑 인터페이스, 3차원 얼굴 모핑 인터페이스로 구성되어 있다. 얼굴 특징점 입력 도구는 3차원 텍스처매핑과 모핑 애니메이션을 위한 보조 도구로서 얼굴의 특징점을 입력하여 텍스처매핑과 임의의 두 얼굴간의 모핑 영역을 정할 때 사용된다. 텍스처매핑은 3D 스캐너로부터 획득한 얼굴의 기하 데이터에 세 방향의 사진 이미지를 이용하여 매핑한다. 3D 얼굴모핑은 얼굴 특징점 입력 도구로부터 얻은 특징점을 중심으로 얼굴 영역을 분류하여 임의의 두 얼굴 간의 영역간 매핑을 실현한다. 본 시스템은 사용자가 별도의 프로그래밍 작업 없이 대화형 인터페이스에서 3D 스캐너에서 획득한 얼굴 메쉬 데이터를 이용하여 사진 이미지로 텍스처 매핑을 실행하여 사실적인 3D 얼굴 모델을 얻을 수 있고, 임의의 서로 다른 얼굴 모델들간의 모핑 애니메이션을 쉽게 실현할 수가 있다.
최근 가상현실 기술의 발전으로 가상의 3D 객체와 자연스러운 상호작용이 가능하도록 하는 사용자 친화적인 손 제스처 인터페이스에 대한 연구가 활발히 진행되고 있다. 그러나 대부분의 연구는 단순하고 적은 종류의 손 제스처만 지원되고 있는 실정이다. 본 논문은 가상환경에서 3D 객체와 보다 직관적인 방식의 손 제스처 인터페이스 방법을 제안한다. 손 제스처 인식을 위하여 먼저 전처리 과정을 거친 다양한 손 데이터를 이진 결정트리로 1차 분류를 한다. 분류된 데이터는 리샘플링을 한 다음 체인코드를 생성하고 이에 대한 히스토그램으로 특징 데이터를 구성한다. 이를 기반으로 학습된 MCSVM을 통해 2차 분류를 수행하여 제스처를 인식한다. 본 방법의 검증을 위하여 3D 블록을 손 제스처를 통하여 조작하는 'Virtual Block'이라는 게임을 구현하여 실험한 결과 16개의 제스처에 대해 99.2%의 인식률을 보였으며 기존의 인터페이스보다 직관적이고 사용자 친화적임을 알 수 있었다.
The demand for metal-polymer joining technology have been increasing, especially in the industrial fields of automotive and aerospace, which require the manufacturing of various lightweight parts. Conventional joining processes have technical hurdles on aspects such as thermal degradation, need for chemical surface treatment, or complicated process settings. These issues can be alleviated by employing interlocking structures for the metal-polymer joined interface. In this study, we joined 3D-printed metal and polymer parts, which were featured with 3D-printed interlocking structures at their interface. By using high frequency induction heating, the joined region could be locally heated to reduce the thermal degradation and distortion of polymer parts. In addition, through the adjustment of interface morphologies and compression conditions, the polymer flow could be optimized to completely fill the interlocking grooves on metal parts, thereby achieving high joining strength. This suggests feasible guidelines for manufacturing metal-polymer joined structures involving 3D-printed architectures.
The 3D Image which embodies real object to 3D space of computer enables various geometrical analysis as well as visualization of complex 3D shape by giving sense for the real and cubic effect that can not be offered in 2D image. Human gives real object to same physical properties in 3D space imagination world of computer, and it is expected that this enables offering of various information by user strengthening interface between human-computer to observe object in real condition. In this study, formal style routine of 3D image creation applying digital photogrammetry was designed for more practical, highly trusty 3D image creation, and the system was emboded using object-oriented technique which strengthen user interface. Also, the discontinuity information about rock slope using 3D image is acquired that is orientation, persistence, spacing and aperture etc.
Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the data exchange between the contractors, designers, fabricators and constructors. Therefore, a readily accessible information model interface module based on BIM technology is essential for their communication during a project life-cycle. In this study, BIM based information model interface module for a modular pier was developed. For the information models, the PBS(Product Breakdown Structure) and LOD(Level of Development) were defined. Next, all components of a modular pier were conducted by the parametric modeling technique, and then 3D cell library interface was developed. An nterface module was also developed using VBA(Visua basic Application) for exchanging a data from 3D model library to other softwares such as Microstation, AutoCad and Excel and was connected with MS Access database. The developed information model interface module would improve the design quality of the modular pier and reduce the time and cost for design. Updated 3D information models could be utilized for the fabrication, assembly, and construction process for modular piers.
3D/가상환경 애플리케이션을 위한 3D 인터랙션에 관한 연구는 이동(navigation), 선택(selection), 조작 (manipulation), 시스템 제어(system control)와 같은 기본적인 4가지 형태의 상호작용으로 정의하고 광범위하게 연구되어 왔으며, 일반적으로 현실세계나 가상환경에서 작은 물체라도 상호작용하기에 적합한 기술로 여겨져 왔다. 그러나 이러한 비직관적인 상호작용 방법은 최근 산업계에서 필요시 되고 있는 가상 훈련이나 가상 디자인/사용성 평가 시스템과 같이 사용자가 도구나 장치를 사용하여 간접적으로 물체를 조작해야 하는 비직관적인 상호작용 방법이 아닌, 자신의 손으로 직접 물체를 만지거나 조작할 수 있는 직관적인 상호작용 방법이 필요한 고품질, 고정밀 애플리케이션을 지원하기에는 적합하지 않은 방법이었다. 따라서 본 연구에서는 직관적이며 자연스러운 상호작용을 지원하기 위한 방법으로 고정밀 핸드 조작과 사실적 역.촉감을 제공하는 장갑형 핸드 인터페이스 장치 및 햅틱 장갑 장치와 6자유도 햅틱 장치로 구성된 핸드 햅틱 인터페이스를 제시하고자 한다.
본 연구는 비접촉식 제스처 기반 조형 태스크의 직관성 향상을 위한 다중 모달리티 인터페이스 디자인 GSS를 제안하였다. 디자인 조형 과정 및 조형 형태에 대한 사용자 경험을 조사한 후, 기술 발전에 따른 세대별 조형 시스템을 분석하였다. 또, 비접촉 3D 조형 시스템상에서의 조형 제작 프로세스, 조형 제작 환경, 제스처와 조형 태스크 간의 관계성, 자연스러운 손 조합 패턴과 사용자 손동작 요소들을 정의하였다. 이후, 기존 비접촉 3D 조형 시스템상에서 비접촉식 제스처 인터랙션을 관찰하고 자연스러운 조형 제작을 위해 조형 작성자의 행동체계가 반영된 인터페이스의 시각적 메타포와 자연스러운 제스처 인터랙션을 유도할 수 있는 행동적 메타포를 도출하였다. 프로토타입을 개발한 후, 제안된 주요 조형 태스크별 제스처 세트의 직관성을 알아보기 위해 기존 조형 시스템들과 비교하여 사용성 평가를 진행하였다. 제안된 GSS 시스템의 제스처는 이해도, 기억성, 오류율에서 우수성을 보였다. 제스처 인터페이스는 사용자의 경험에 기반한 시각적/행동적 메타포를 바탕으로 시각적 모달리티가 함께 사용된 제스처 인터페이스를 사용자들에게 제공되어야 한다는 것을 확인하였다.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.