• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.313-318
• /
• 1990

Forty-two outbred female Sprague-Dawley rats weighing 145 g were used to study the effects of a beta-agonist, cimaterol, on growth, body composition and urinary excretion of 3-methylhistidine (MH) at 3, 6 and 18 d. Cimaterol (CIM) was administered in the feed at 10 mg/kg. The growth promoting effect of CIM was most evident during the initial part of the feeding period, followed by a gradual decrease in the magnitude of the response with no significant effect at 18 d. The action of CIM was confined to skeletal and cardiac muscles with no stimulating effect on other organs. The amount of urine excretion and urinary MH excretion was reduced (p<.01) at 3 d in the CIM group. No difference was found at 6 d, followed by an increased urine excretion (p<.05) and MH excretion (p<.01) at 18 d. An inverse relationship between growth rate and urinary MH excretion suggested that the increased growth rate of CIM-fed rats during the initial part of the feeding period is primarily attributed to the decreased protein degradation rate. It was further suggested that both fractional synthesis rate and fractional degradation rate increased during the later part of the feeding period.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1463-1473
• /
• 2024

Objective: Three experiments were conducted to evaluate the effects of Saccharomyces yeast postbiotics (SYP) in feeds for sows on the growth of offspring (Exp. 1), for nursery pigs on their growth (Exp. 2), and for nursery and finishing pigs on their growth (Exp. 3). Methods: Exp. 1 had 80 sows at breeding assigned to 4 groups with SYP at 0, 0.050, 0.175, and 0.500 g/kg. Offspring were fed a common diet for 126 d. Exp. 2 had 144 barrows at 8 kg body weight (BW) allotted to CON (no SYP); YPC (SYP at 0.175 g/kg; d 0 to 42); and YPD (SYP at 1.25, 0.75, and 0 g/kg; d 0 to 7, d 8 to 21, and d 22 to 42, respectively) with 8 pens/treatment (6 pigs/pen). Exp. 3 had 96 barrows at 8 kg BW allotted to CON (no SYP); YPN (SYP at 0.175 g/kg; d 0 to 42); YPF (SYP at 0.100 g/kg; d 43 to 119); and YPA (SYP at 0.175 and 0.100 g/kg; d 0 to 42 and d 43 to 119, respectively) with 8 pens/treatment (3 pigs/pen). Results: In Exp. 1, increasing SYP increased (p<0.05, quadratic) the sow body score (maximum at 0.30% SYP), reduced (p<0.05, quadratic) the days-wean-to-estrus (minimum at 0.27% SYP), and increased (p<0.05) offspring BW at weaning and their average daily gain (ADG) and feed efficiency (G:F) at d 126. In Exp. 2, ADG, average daily feed intake (ADFI), and G:F of YPC were the greatest (p<0.05). The ADG and ADFI of YPD were greater (p<0.05) than CON. Fecal score of YPC and YPD was smaller (p<0.05) than CON. In Exp. 3, YPA had the greatest (p<0.05) ADG and YPN and YPF had greater (p<0.05) ADG than CON. Conclusion: SYP enhanced sow performance, offspring growth, growth of nursery and growing pigs with the greater efficacy at 0.27 to 0.32 g/kg feed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.657-659
• /
• 2022

Hydroponics and aquaponics are attracting attention as they enable automated farm management and stable production thanks to the spread of smart farms. There are issues that need to be addressed in applying smart farm, but one of them is to be able to respond flexibly to demand by automatically deciding when to ship, which requires a method for automatically determining the growth level of crops. In this paper, we focused on the simple fact that the area and volume occupied by crops increase with the growth of them, and showed that it is possible to monitor the growth process of crops with 2D and 3D cameras, and to determine the degree of growth of crops by calculating the area and volume. It is necessary to verify the method by applying it to various environments and crops, but in the case of common crops in hydroponics and aquaponics, it is possible to determine the growth level through the analysis of the acquired image through 2D and 3D camera.

• Particle and aerosol research
• /
• v.9 no.3
• /
• pp.163-171
• /
• 2013

Soot particles emitted from combustion processes are often coated by non-absorbing organic materials, which enhance the global warming effect of soot particles. It is of importance to study the condensation characteristics of soot particles experimentally and theoretically to reduce the uncertainty of the climate impact of soot particles. In this study, the condensational growth of soot particles in a tubular coater was modeled by a one-dimensional (1D) plug flow model and a two-dimensional (2D) laminar flow model. The effects of 2D heat and mass transports on the predicted particle growth were investigated. The temperature and coating material vapor concentration distributions in radial direction, which the 1D model could not accounted for, affected substantially the particle growth in the coater. Under the simulated conditions, the differences between the temperatures and vapor concentrations near the wall and at the tube center were large. The neglect of these variations by the 1D model resulted in a large error in modeling the mass transfer and aerosol dynamics occurring in the coater. The 1D model predicted the average temperature and vapor concentration quite accurately but overestimated the average diameter of the growing particles considerably. At the outermost grid, at which condensation begins earliest due to the lowest temperature and saturation vapor concentration, condensing vapor was exhausted rapidly because of the competition between condensations on the wall and on the particle surface, decreasing the growth rate. At the center of the tube, on the other hand, the growth rate was low due to high temperature and saturation vapor concentration. The effects of Brownian diffusion and thermophoresis were not high enough to transport the coating material vapor quickly from the tube center to the wall. The 1D model based on perfect radial mixing could not take into account this phenomenon, resulting in a much higher growth rate than what the 2D model predicted. The result of this study indicates that contrary to a previous report for a thermodenuder, 2D heat and mass transports must be taken into account to model accurately the condensational particle growth in a coater.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.105-148
• /
• 2023

This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.249-256
• /
• 1994

By surface structure and X-ray topographic observation, growth mechanism of NAB single crystal grown by TSSG technique using a BaB4O7 flux was studied. Surface structure of grown crystals were investigated by optical microscope. Growth history and crystal defects included within grown crystal were investigated using X-ray topography. The {001} faces were grown by 2-D nucleation growth. As decreasing cooling rate, growth mechanism of {111} and {11} was changed from 2-D nucleation growth to the growth by screw dislocation. Only surface striations developed parallel to a-axis were observed on {010} faces. Growth sector of NAB crystals were divided into {001}, {111}, {010}, {021}, {11}. The inclusion which was usually trapped between {001} faces was investigated.

• Journal of Mushroom
• /
• v.3 no.2
• /
• pp.75-78
• /
• 2005

The results of studies for determining the nutrients sources of mycelial growth for optimal condition of Pleurotus cornucopiae are as follows; 1) Optimal carbon source of mycelial growth of Pleurotus cornucopiae is maltose(357mg/25ml/15d); 2) Optimal nitrogen source of mycelial growth of Pleurotus cornucopiae is peptone(347mg/25ml/15d); 3) Optimal organic acid source of mycelial growth of Pleurotus cornucopiae is glutamic acid(389mg/25ml/15d); 4) Optimal vitamin source of mycelial growth of Pleurotus cornucopiae is biotin(399mg/15d); and 5) Optimal C/N ratio for mycelial growth for determining the condition of Pleurotus cornucopiae is 40(398mg/15d).

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.81-86
• /
• 2001

This experiment was carried out to investigate watering with relation to growth, quality and yield of essential oil in sweet basil. The degree of water stress was taken as amount of watering. D1 was watered with 25mL for 2 weeks and 30mL from 4 to 5 weeks after planting in Wagner pot (1/20000a, ${\phi}24cm$). As this, 75mL and 90mL, 225mL and 270mL, and 675mL and 810mL were watered in D2, D3, and D4 treatment respectively. DFT was set up as water stress was not inflicted. The growth of basil in D3 and D4 was better than that of others, in which root activity was as much twice as that of D1. Essential oil of D1 was recorded the lowest content as 0.33%. The result of proline content, peroxidase activity, photosynthesis, stomatal conductance and stomatal resistance were proved D1 to be stressed. This treatment consequently increased the content of essential oil. In consideration of growth and essential oil content, D3 treatment was highest as 47.37mg in oil production per plant. Finally, D3 watered with 225mL for 2 weeks and 275mL from 4 to 5 weeks after planting could be selected on the purpose of both plant growth and essential oil production. Essential oil content of sweet basil was increased in response to water stress. For increase of essential oil yield, oil synthesis could be raised by giving water stress just before harvesting.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.108-115
• /
• 2018

The increasing demands for three-dimensional (3D) electronic and optoelectronic devices have triggered interest in epitaxial growth of 3D semiconductor materials. However, most of the epitaxially-grown nano- and micro-structures available so far are limited to certain forms of crystal arrays, and the level of control is still very low. In this review, we describe our latest progress in 3D epitaxy of oxide and nitride semiconductor crystals. This paper covers issues ranging from (i) low-temperature solution-phase synthesis of a well-regulated array of ZnO single crystals to (ii) systematic control of the axial and lateral growth rate correlated to the diameter and interspacing of nanocrystals, as well as the concentration of additional ion additives. In addition, the critical aspects in the heteroepitaxial growth of GaN and InGaN multilayers on these ZnO nanocrystal templates are discussed to address its application to a 3D light emitting diode array.

• Korean Journal of Pharmacognosy
• /
• v.48 no.3
• /
• pp.195-201
• /
• 2017

To develop new therapy for prevention and treatment of hair loss is very important according to increase of the number of hair loss people. The aim of this study was to investigate the hair growth promoting effects of pectin lyase-modified red ginseng extract (GS-E3D). We examined antioxidant and anti-inflammatory effects, human hair dermal papilla cells (HHDPC) proliferation, and testoterone-induced $5{\alpha}$-reductase inhibitory effects. GS-E3D show not only 1,1-diphenyl-2-picryhydrazyl (DPPH) radical scavenging activity and xanthine oxidase inhibitory effects as an anti-oxidant property, but also lip-oxygenase and hyaluronidase inhibitory effects as an anti-inflammatory property. Human hair dermal papilla cells proliferation by GS-E3D was higher than those of minoxidil or finasteride, using the positive controls. Moreover, GS-E3D exhibited $5{\alpha}$-reductase inhibitory activities after stimulating by testoterone. The present results indicate that GS-E3D has a potential to be as an hair growth promoting agent for cosmetic materials.