• 한국정보통신학회논문지
• /
• 제7권3호
• /
• pp.485-491
• /
• 2003

본 논문에서는 디지털 위성방송 지상 리피터에 적용하고자 고 이득 저 잡음특성을 갖는 소형 채널증폭기를 설계하였다. 채널증폭기를 설계함에 있어서 각각의 증폭 단에서의 잡음지수와 이득 및 안정도를 서로 절충하여 최적화 시켰다. 채널증폭기는 첫째 단에서 저 잡음특성을 나타내도록 임피던스를 정합시켰으며 둘째 단 이상에서는 균일한 이득과 고 안정 동작상태를 유지하고 최종 출력 단에서 고 이득특성을 나타내었다. 설계된 6단의 고 이득 저잡음특성을 나타내는 채널증폭기에 대하여 디지털 위성방송 지상주파수 11.7GHz∼12.7GHz의 대역에서 실험한 결과 68dB의 증폭이득과 2.4dB의 잡음지수를 나타내었으며 63dB의 동작범위를 나타내어 위성방송 지상리피터용 채널증폭기에 적용할 수 있음을 확인하였다.

• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.66-75
• /
• 1997

We derive the system design parameters to implement the receiving system for the PCS mobile station to satisfy the J-sTD-018 which is the PCS mobile station(MS) minimum performance. Also we analyze the system performance and intermodulation spurious due to the values of a device cause the system performance degradation, is proposed. The simulation shows the receiver's maximum system noise figure to satisfy the receiver selectivity is approximately 11 dB. While the MS noise figure is 10dB with system margin 1 dB, the minimum selectivity is -71 dB at 1.25MHz frequency offset from the carrier frequency. And the input 3rd order intercept point of the MS class I and the MS class II~V is -9.5 dBm and -14dBm respectively. When the interference power level at the receiver is small, the receiver has better performance as we increase the gain of the LNA. However, when the interference level at the receiver is large, the receiver performance is heavily affected by the spurious as we increase the gain of the LNA. Thus, we proved the effectiveness of the LNA On/Off switching technique as to reduce the effect of the spurious.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.17-17
• /
• 2003

tRNA (m¹ G37) methyltransferase (TrmD) catalyze s the trans for of a methyl group from S-adenosyl-L-methionine (AdoMet) to G/sup 37/ within a subset of bacterial tRNA species, which have a residue G at 36th position. The modified guanosine is adjacent to and 3' of the anticodon and is essential for the maintenance of the correct reading frame during translation. We have determined the first crystal structure of TrmD from Haemophilus influenzae, as a binary complex with either AdoMet or S-adenosyl-L-homocysteine (AdoHcy), as a ternary complex with AdoHcy/phosphate, and as an apo form. The structure indicates that TrmD functions as a dimer (Figure 1). It also suggests the binding mode of G/sup 36/G/sup 37/ in the active site of TrmD and catalytic mechanism. The N-terminal domain has a trefoil knot, in which AdoMet or AdoHcy is bound in a novel, bent conformation. The C-terminal domain shows a structural similarity to DNA binding domain of trp or tot repressor. We propose a plausible model for the TrmD₂-tRNA₂ complex, which provides insights into recognition of the general tRNA structure by TrmD (Figure 2).

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1651-1664
• /
• 2023

It is very difficult to capture the multi-dimensional phenomena such as asymmetric flow and temperature distributions with the one-dimensional (1D) model, obviously, due to its inherent limitation. In order to overcome such a limitation of the 1D representation, many state-of-the-art system codes have equipped a three-dimensional (3D) component for multi-dimensional analysis capability. In this study, a standard multi-dimensional analysis model of APR1400 (Advanced Power Reactor 1400) has been developed using TRACE (TRAC/RELAP Advanced Computational Engine). The entire reactor pressure vessel (RPV) of APR1400 has been modeled using a single 3D component. The fuels in the reactor core have been described with detailed and coarse representations, respectively, to figure out the impact of the fuel description. Using both 3D RPV models, a comparative analysis has been performed postulating a double-ended guillotine break at a cold leg. Based on the results of comparative analysis, it is revealed that both models show no significant difference in general plant behavior and the model with coarse fuel model could be used for faster transient analysis without reactor kinetics coupling. The analysis indicates that the asymmetric temperature and flow distributions are captured during the transient, and such nonuniform distributions contribute to asymmetric quenching behaviors during blowdown and reflood phases. Such asymmetries are directly connected to the figure of merits in the LBLOCA analysis. Therefore, it is recommended to employ a multi-dimensional RPV model with a detailed fuel description for a realistic safety analysis with the consideration of the spatial configuration of the reactor core.

• 한국전자파학회논문지
• /
• 제28권5호
• /
• pp.430-433
• /
• 2017

본 논문은 0.25 um GaN HEMT 공정을 이용하여 S/C/X-대역에서 저항 피드백 구조의 저잡음 증폭기 MMIC에 관한 연구이다. GaN 소자는 높은 항복 전압과 에너지 밴드갭 그리고 고온에서 안정성을 갖는 고출력 소자로서 장점을 가진다. 따라서 높은 선형성을 가지는 GaN 소자를 이용한 수신기는 리미터 없이 구현할 수 있기 때문에 수신기의 잡음 지수가 개선되고, 수신기 모듈의 크기를 줄일 수 있다. 제안한 GaN 저잡음 증폭기 MMIC는 S/C/X-대역에서 15 dB 이상의 이득, 3 dB 이하의 잡음 지수, 13 dB 이상의 입력 반사 손실, 그리고 8 dB 이상의 출력 반사 손실을 가진다. GaN 저잡음 증폭기 MMIC는 드레인 전압 20 V, 게이트 전압 -3 V일 때, 70 mA의 전류를 소모한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.371-379
• /
• 2000

The 4-pole linear homopolar synchronous motor (LHSM), so called linear inductor motor, is composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. To reduce the calculation time, the simplified 3D finite element model with equivalent reluctance and/or permanent magnet is presented. To obtain a clear understanding, propriety and usefulness of the developed model, we compare with the results of simplified 3D FEA, general 3D FEA and test. Consequently, the results of simplified and 3D FEM analysis are nearly identical, but much larger than that of static test at d-axis armature excitation. Therefore the improved FEA model, such as full model with half slot, is needed for the precise analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.3-5
• /
• 1999

The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. Three dimensional model of LHSM provided the equivalent reluctance and PM model for 2D FEA. From these 2D FEA models, when the motor was fed by DC and 3-phase currents, the magnetic field were calculated and compared with the results of 3D FEA.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.31-35
• /
• 2005

A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. A demonstrator of this concept is made. We will discuss measurements and numerical simulations of the key optical characteristics of this display. The switching characteristics of LC-filled lenticular lenses are discussed and the overlap of the view distributions is introduced as a figure of merit for crosstalk. The 0.62 overlap in our present demonstrator design, gives an excellent 3D image quality, combined with a good depth impression.

• 한국전자파학회논문지
• /
• 제19권3호
• /
• pp.358-365
• /
• 2008

본 논문에서는 CMOS 0.18 um 공정을 이용하여 UWB(Ultra Wide Band) 시스템의 낮은 대역 $3.1{\sim}4.8GHz$에서 사용할 수 있는 단일 입력-차동 출력 이득 제어 저잡음 증폭기를 설계하였다. 측정 결과는 높은 이득 모드에서 차동 출력 전력 이득은 각각 $14.1{\sim}15.8dB,\;13.3{\sim}15dB$로, 입력 반사 계수는 -10dB 이하로, lIIP3는 -19.3dBm, 잡음 지수는 $4.85{\sim}5.09dB$로 측정되었으며, 이때 전원 전압 1.8V에서 사용 전력은 19.8 mW를 사용하였다. 낮은 이득 모드에서 차동 출력 전력 이득은 각각 $-6.1{\sim}-4.2dB,\;-7.6{\sim}-5.6dB$로, 입력 반사 계수는 -10dB 이하로, IIP3는 -1.45 dBm, 잡음 지수는 $8.8{\sim}10.3dB$로 측정되었으며, 이때 전원 전압 1.8V에서 사용 전력은 5.4mW를 사용하였다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2269-2275
• /
• 2008

This paper examined the simulation results after applying not only spiral inductor's 3D EM simulation but also de-embedding technique to reduce the pad's RF effects. When calculating standard deviation with measurement results not only the gain at 0.5GHz${\sim}$4GHz but also noise figure at 1.8GHz${\sim}$4GHz, the simulation results includes de-embedded inductor' model improved gain deviation by 0.171 and noise figure deviation by 0.151 than the results from simulation with foundry inductor equivalent circuit models.