• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.87-98
• /
• 2012

A river boundary is defined as the intersection between a main stream of a river and the land. Mapping of the river boundary is important for the protection of the properties in river areas, the prevention of flooding and the monitoring of the topographic changes in river areas. However, the utilization of the ground surveying technologies is not efficient for the mapping of the river boundary due to the irregular surfaces of river zones and the dynamic changes of water level of a river stream. Recently, the spatial information data sets such as the airborne LiDAR and aerial images are widely used for coastal mapping due to the acquisition of the topographic information without human accessibility. Due to these advantages, this research proposes a semi-automatic method for mapping of the river boundary using the spatial information data set such as the airborne LiDAR and the aerial photographs. Multiple image processing technologies such as the image segmentation algorithm and the edge detection algorithm are applied for the generation of the 3D river boundary using the aerial photographs and airborne topographic LiDAR data. Check points determined by the experienced expert are used for the measurement of the horizontal and vertical accuracy of the generated 3D river boundary. Statistical results show that the generated river boundary has a high accuracy in horizontal and vertical direction.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.89-101
• /
• 2013

Recently, importance of indoor space is on the rise, as larger and more complex buildings are taking place due to development of building technology. Accordingly, range of the target area of spatial information service is rapidly expanding from outdoor space to indoor space. Various demands for indoor spatial information are expected to be created in the future through development of high technologies such as IT Mobile and convergence with various area. Thus this research takes a look at available methods for building indoor spatial information and then builds high accuracy three-dimensional indoor spatial information using indoor high accuracy laser survey and 3D vector process technique. The accuracy of built 3D indoor model is evaluated by overlap analysis method refer to a digital map, and the result showed that it could guarantee its positional accuracy within 0.04m on the x-axis, 0.06m on the y-axis. This result could be used as a fundamental data for building indoor spatial data and for integrated use of indoor and outdoor spatial information.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.3
• /
• pp.383-405
• /
• 2007

In this paper we estimate knowledge production function for 15 South Korean industry sectors using panel data. To accommodate the influence of inter-sectoral interactions on the creation of knowledge, we estimate parameters for related knowledge production functions using the Dynamic Seemingly Unrelated Regression(DSUR) model proposed by Mark et al. (2005). We find the elasticity of knowledge production with respect to the size of research staff to be 0.25 and that with respect to the existing stock of knowledge to be 0.35. The fact that the elasticity of new knowledge creation with regard to the existing knowledge stock is below 1 in South Korea corroborates the view that the rate of long-term growth of her economy is chiefly determined by the elasticity related to production functions of goods and services and the rate of population growth, and that her government policy, to ensure a continued growth for the Korean economy, must shift the focus of R&D policies from the current direct intervention-centered model to one consisting of indirect measures, namely supporting knowledge management and diffusion and the creation of a knowledge sharing system. In terms of R&D policy implications it could be consider that the national knowledge production system should strengthen the cumulative process of knowledge accumulation and population for research and development. Our country R&D policy, also, need to adopt a global approach to increase knowledge stock at the highest levels of a country.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.607-613
• /
• 2021

Long-bone examination is mainly used for inspection of the lower extremities. Recently, a long length detector (FXRD-1751S, VIEWORKS, Korea) with three digital detectors attached has been developed. High energy X-rays are used because pelvic areas require high image quality. In this case, X-rays are transmitted a lot in thin areas such as an ankle, and it is not suitable for diagnosing an image. Therefore, this study use copper filters made with 3D printers to increase image quality in the Long-bone inspection. A copper filter was manufactured in consideration of the overall thickness of the lower part. The experiment was conducted in anterior-posterior (AP) and lateral (LAT) positions, depending on the presence or absence of the filter. 5x5 pixels of region of interest (ROI) were selected from the pelvis, knee, and ankle areas. X-rays were irradiated under the conditions of 70 kVp and 40 mAs for AP, 80 kVp, and 63 mAs for lat when without filters, 90 kVp and 80 mAs for AP, 90 kVp and 100 mAs for lat when with filters. signal to noise ratio(SNR) ratio and contrast to noise (CNR) values were measured 1106.38, 14.34 before applying the filter and 1189.32, 70.43 after the filter. For the knee area, 650.44, 97.61 before applying the filter, and 1013.17, 444.24 after applying the filter. For the ankle area, 206.65, 23.68 before applying the filter and 993.50, 136.11 after applying the filter. In the Long-bone examination, SNR and CNR were greatly measured when the filter was applied, confirmed the availability of using the copper additional filter.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.289-294
• /
• 2014

Recently, the various web service and applications are provided to the user. As to these service, because of providing the service to the authenticated user, the user undergoes the inconvenience of performing the authentication with the service especially every time. The OAuth(Open Authorization) protocol which acquires the access privilege in which 3rd Party application is limited on the web service in order to resolve this inconvenience appeared. This OAuth protocol provides the service which is convenient and flexible to the user but has the security vulnerability about the authorization acquisition. Therefore, we propose the method that analyze the security vulnerability which it can be generated in the OAuth 2.0 protocol and secure user authority authentication method.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.305-313
• /
• 2015

This study was conducted to investigate the relationship of happiness, happiness promoting activities and self-reflection. Need of happiness is as important as right of life and freedom in the convergence society and heating up according to appearance of positive psychology. Subjects were 366 nursing students. Data were collected Oct. 2-8(2014), and analyzed using t-test/ANOVA and correlation by SPSS. Self-reflection showed statistically significant differences according to grade, and experience of practice. Happiness and happiness promotion activities showed statistically significant difference according to economic state. Happiness promotion activities were positively correlated with self-reflection and happiness. The factors affecting happiness were happiness promotion, economic state, and self-reflection which accounted for 26.3%. Repeated research which include various variables of happiness and self-reflection is needed, and suggest qualitative research about happiness.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.354-360
• /
• 2018

PURPOSE. To compare and analyze trueness and precision of provisional crowns made using stereolithography apparatus and subtractive technology. MATERIALS AND METHODS. Digital impressions were made using a master model and an intraoral scanner and the crowns were designed with CAD software; in total, 22 crowns were produced. After superimposing CAD design data and scan data using a 3D program, quantitative and qualitative data were obtained for analysis of trueness and precision. Statistical analysis was performed using normality test combined with Levene test for equal variance analysis and independent sample t-test. Type 1 error was set at 0.05. RESULTS. Trueness for the outer and inner surfaces of the SLA crown (SLAC) were $49.6{\pm}9.3{\mu}m$ and $22.5{\pm}5.1{\mu}m$, respectively, and those of the subtractive crown (SUBC) were $31.8{\pm}7.5{\mu}m$ and $14.6{\pm}1.2{\mu}m$, respectively. Precision values for the outer and inner surfaces of the SLAC were $18.7{\pm}6.2{\mu}m$ and $26.9{\pm}8.5{\mu}m$, and those of the SUBC were $25.4{\pm}3.1{\mu}m$ and $13.8{\pm}0.6{\mu}m$, respectively. Trueness values for the outer and inner surfaces of the SLAC and SUBC showed statistically significant differences (P<.001). Precision for the inner surface showed significance (P<.03), whereas that for the outer surface showed no significance (P<.58). CONCLUSION. The study demonstrates that provisional crowns produced by subtractive technology are superior to crowns fabricated by stereolithography in terms of accuracy.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.291-307
• /
• 2018

Australia is the world's top gold, nickel, iron ore, lead, zinc and uranium, and is ranked in the top five in many other important minerals. Extension to existing resources will continue to support well-established local production. There are perceptions by some that Australia is a mature exploration destination where the easily won near-surface deposits were largely discovered many decades ago. In recent years, Australia faces increasing global competition for investment spending in all jurisdictions in which mineral exploration is encouraged. Many regional communities face the threat of losing their main economic driver as a number of long-term mines are reaching the end of their economic life. However, given the trend of increasing mineral demand due to the 4th industrial revolution, it is considered that Korea is also an opportunity to acquire global competitiveness of geoscience and mining technology by smart and digital mining, and by ICT-convergence technology R&D.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.3
• /
• pp.1155-1178
• /
• 2018

Future automobiles are evolving into movable living spaces capable of eco-friendly autonomous driving. The role of electrically processing, controlling, and commanding various information in the vehicle is essential. It is expected that the automotive semiconductor will play a key role in the future automobile such as self-driving and eco-friendly automobile. In order to foster the automotive semiconductor industry, it is necessary to grasp technology trends and to acquire technology and quality that reflects the requirements in advance, thereby achieving technological innovation with industrial competitiveness. However, there is a lack of systematic analysis of technology trends to date. In this study, we analyzed the technology trends of automotive semiconductors using patent analysis and topic model, and confirmed technologies such as electric cars, driving assistance, and digital manufacturing. The technology trends showed that element technology and technical characteristics change according to technology convergence, market needs, and government regulations. Through this research, it is expected that it will help to make R&D policy for automotive semiconductor industry and to make decision for industrial technology strategy establishment. In addition, it is expected that it will be used effectively in detail research direction and patent strategy establishment by providing detailed classification of technology and trend analysis result of technology.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2002

The technology for the three-dimensional terrain perspective view can be used as an important factor in planning and designing for the various construction projects. In this study, the stereo image perspective view has been generated for the multi-dimension analysis by combining useful digital map and remotely sensed satellite images. In the course of experimenting with the three-dimensional topography generated by the combination of the orthopimage by the precise GCP and DEM from the contour line, the technology has been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This stereo image bird's eye view has made it possible to make multi-dimensional analysis on the terrain, which provides real-time virtual access to the designated construction sites and will be a versatile application for development planning and construction projects.