• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.18-27
• /
• 2012

This paper proposes a management method for a coastal black pine forest landscape considering the parallax effect. For the study, 10 coastal black pine forests in Gangneung were investigated about the average width of the coastal forests, the average diameters, and the intervals of the pines. Categorizations were realized for the 3 types of scene(sea, field, mountain, residential area, commercial area), diameter(16cm, 22cm, 28cm) and interval(5m, 7m, 10m) to produce a total of 45 scenic simulations. An investigation was made on the scenic preferences using 45 simulation images with S.D, and Likert Scales. The results were as follows: According the comparison of scenic preferences, natural landscapes(sea, field, and mountain) ranked high among preferences, with fabricated landscapes(residential area, commercial area) ranked low. The highest scenic preferences were shown with the seascape and an interval of 7m between the trees. On the contrary, the interrelationship was very low between the visual quantity of the scenic's elements(green, sky, building, road etc.) and the scenic preferences. As the results of the factor analysis, the 3 sense factors of "Depth(78.0%)" "Diversity(l5.6%)" and "Spatiality(6.4%)" explained coastal scenic preferences. "Spatiality" showed significant differences at intervals of 5~7m, and 10m between trees. This shows coastal forest management based on the interval of 10m standard affecting scenic preference.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.304-310
• /
• 2003

This study was conducted to estimate the internal dissolved organic carbon (DOC) loading from sediment in eutrophic shallow Lake Kasumigaura. Contents of water and organic carbon were about 80% and 6.3% with depth in the sediment, respectively. The highest DOC concentration in porewater (104 mg C/l) was observed in September suggesting that the porewater could play an important role as an internal loading of DOC. Results of DOC release experiments showed that the labile-DOC (L-DOC) release was not detected in the oxic condition, while refractory-DOC(R-DOC) release was detected. The L-DOC and R-DOC release rates in the anoxic codition ranged from 14.5${\sim}$ 48.6, 14.4 ${\sim}$27.3 mgC $m^{-2}$ $d^{-2}$, respectively. The current study showed that L-DOC released in the oxic condition was rapidly utilized by aerobic bacteria, in contrast, L-DOC and R-DOC released in anoxic codition were slowly utilized by anaerobic bacteria. These results suggested that L-DOC and R-DOC were closely related to sediment release and most of the R-DOC released could be an important source of DOC in eutrophic lakes during summer. Therefore, R-DOC pool should be added as one of the important energy source for microbial-based aquatic food webs in eutrophic lakes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.580-586
• /
• 2000

Data collected between 1981 and 1991 at the Philippine Carabao Center at Central Luzon State University (PCC-CLSU) were used for the comparison of growth, milk yield and draughtability of Murrah-Philippine crossbred and Philippine native buffaloes. Body weights and body measurements were available at 3-month intervals from birth to 36 months of age for a total of 34 $Murrah{\times}Philippine$ native buffalo F1 crossbreds (CBB; 21 cows, 13 bulls) and 32 Philippine native buffaloes (PNB; 16 cows, 16 bulls). Lactation records were available for 14 CBB and 19 PNB cows. Data for draughtability under wet and dry ploughing conditions were available for 4 CBB and 4 PNB steers. The results indicate that crossbreds grow faster (0-9 months of age: cows $442{\pm}19$ vs. $301{\pm}21g/day$, bulls $305{\pm}23$ vs. $296{\pm}21g/day$; 9-36 months of age: cows $227{\pm}10$ vs. $147{\pm}12g/day$, bulls $282{\pm}13$ vs. $138{\pm}12g/day$), mature earlier and produce more milk (1st lactation: $1139{\pm}153$ vs. $450{\pm}112kg$; 2nd lactation: $1115{\pm}132$ vs. $488{\pm}136kg$) than native buffaloes, but have a poorer draughtability (wet ploughing; force as % of body weight $8.8{\pm}0.2$ vs. $12.2{\pm}0.6$; dry ploughing: cut depth $10.98{\pm}0.25$ vs. $11.92{\pm}0.13cm$, velocity $0.50{\pm}0.03$ vs. $0.60{\pm}0.02m/sec$, force as % of body weight $9.0{\pm}0.6$ vs. $11.3{\pm}0.7$). The correlation coefficients between body weight and body measurements at birth and at 3-month intervals indicate that heart girth has a relatively high correlation with body weight, especially in crossbreds. It is concluded that in Philippine smallholder farming systems in which meat and milk production are secondary to draught power, the native buffalo is preferable from the point of view of input needed to maintain the number of animals kept for a required draught force.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.81-93
• /
• 2015

The comprehensive master plan in November 2010 on Saemangeum internal development has been released, and there is a need for complementary measures related to in-situ monitoring methods in order to acquire water temperature (T) and salinity (S) data. Thus, these data are monitored and analyzed by Korea Rural Community Corporation continuously. The purposes of current study are to evaluate the distributions of seasonal T and S, sigma-t, and stratification parameter and to compare annual stratification system in 2011 and 2012. To achieve these objectives, monthly vertical changes of T, S, and sigma-t, which are reproduced by a kriging technique, have been analyzed. In summer, the temperature difference between surface and bottom layers varies from 2 to $3^{\circ}C$, and the stratification of T is considerably weak. The stratification of S occurs abruptly within depth of EL. (-)5 to EL. (-)10 m. Therefore, stratification is induced by sudden increasing of water inflow amount due to a localized downpour during the rainy season, and these stratification processes are strongly influenced by inflowing a fresh water from watersheds in estuary environment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.81.2-81.2
• /
• 2012

To fabricate a metal mold for injection molding, hot-embossing and imprinting process, mechanical machining, electro discharge machining (EDM), electrochemical machining (ECM), laser process and wet etching ($FeCl_3$ process) have been widely used. However it is hard to get precise structure with these processes. Electrochemical etching has been also employed to fabricate a micro structure in metal mold. A through mask electrochemical micro machining (TMEMM) is one of the electrochemical etching processes which can obtain finely precise structure. In this process, many parameters such as current density, process time, temperature of electrolyte and distance between electrodes should be controlled. Therefore, it is difficult to predict the result because it has low reliability and reproducibility. To improve it, we investigated this process numerically and experimentally. To search the relation between processing parameters and the results, we used finite element simulation and the commercial finite element method (FEM) software ANSYS was used to analyze the electric field. In this study, it was supposed that the anodic dissolution process is predicted depending on the current density which is one of major parameters with finite element method. In experiment, we used stainless steel (SS304) substrate with various sized square and circular array patterns as an anode and copper (Cu) plate as a cathode. A mixture of $H_2SO_4$, $H_3PO_4$ and DIW was used as an electrolyte. After electrochemical etching process, we compared the results of experiment and simulation. As a result, we got the current distribution in the electrolyte and line profile of current density of the patterns from simulation. And etching profile and surface morphologies were characterized by 3D-profiler(${\mu}$-surf, Nanofocus, Germany) and FE-SEM(S-4800, Hitachi, Japan) measurement. From comparison of these data, it was confirmed that current distribution and line profile of the patterns from simulation are similar to surface morphology and etching profile of the sample from the process, respectively. Then we concluded that current density is more concentrated at the edge of pattern and the depth of etched area is proportional to current density.

• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.88-95
• /
• 2017

Chogye basin, which is surrounded by country rock, has a closed-basin form. In such a basin, incident seismic energy can form multiply reflected waves, thus causing energy concentration to occur at this closed-basin area. Microtremor measurement survey was performed at the Chogye basin, which is located in Chogye-myeon and Jeokjungmyeon, Hapcheon-gun, Gyeongsangnam-do, Republic of Korea. Microtremor data were transformed into the frequency domain, and then the horizontal-to-vertical spectral ratios (HVSR) were calculated. Fundamental resonance frequencies were estimated from the HVSR results for every observation point. Using the empirical relationship between site period and thickness for sediment sites in Korea known from the previous study, the distribution of sediment thickness of the Chogye basin was estimated from the fundamental resonance frequencies. Being compared with the mountainous rim with steep slope, the measurement points inside the basin have low values of the fundamental resonance frequency with the minimum of 1.03 Hz, which corresponds to the thickness of sedimentary layer with the maximum depth of about 100 m. A three-dimensional basin model was constructed for bedrock topography of the Chogye basin by an interpolation of basin depths estimated at each measurement site.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.415-423
• /
• 2016

Numerous studies have been made on the negative effects of online games, as the negatives effects of the usage of online games have been recognized as social issues. However, this is a study on the positive functions of online gaming; more specifically, on how the guild activities on online games affect the user's leadership. This study has conducted in-depth interviews with online games, and drew the result using Giorgi's phenomenological analysis as for the methodology. 3 people participated in the research - a high school student, a university student, and an adult office worker - all of whom with experiences of guild leading on online games. To achieve the goal of this study, this study based the subjects' experience to analyze how online game guild activities have affected leadership on the subjects' real lives. As a result, timidity turned into initiation; not only leadership, but also decision making ability and coworking ability, as well as problem solving ability have shown improvement. Through this study, one can see that among the elements of online game, experience in guild activities is providing opportunities for enhancing leadership and possibilities for improving various other abilities. I hope more researchers continue studying interesting and diverse powers of online games based on this study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.61-71
• /
• 1995

Natural ground is a composite consisted of the three phases of water, air and soil paircies. Among the three components, water as a material is weU understood but soil particles are not in foundation engineering. Especially, weathered granite soil generally shows a large volumetric expansion when they freeze. And, the stability and durability of the soil have shown decreased with repetitive freezing and thawing processes. These unique charcteristics may cause various construction and management problems if the soil is used as a construction material and foundation layers. This project was initiated to investigate the soil's physical and engineering characteristics resulting from freezing and freezing-thawing processes. Research results may be used as a basic data in solving various problems related to the soil's unique characteristics. The following conclusions were obtained: The degree of decomposition of weathered granite soil in Kangwon-do was very different between the West and East sides of the divide of the Dae-Kwan Ryung. Soil particles distributed wide from very coarse to fine particles. Consistency could be predicted with a function of P200 as LL=0.8 P200+20. Permeability ranged from 10-2 to 10-4cm/sec, moisture content from 15 to 20% and maximum dry density from 1.55 to 1.73 g /cmΥ$^3$ By compaction, soil particles easily crushed, D50 of soil particles decreased and specific surface significantly increased. Shear characteristics varied wide depending on the disturbance of soil. Strain characteristics influenced the soil's dynamic behviour. Elastic failure mode was observed if strain was less than 1O-4/s and plastic failure mode was observed if strain was more than 10-2/s. The elastic wave velocity in the soil rapidly increased if dry density became larger than 1.5 g /cm$^3$ and these values were Vp=250, Vg= 150, respectively. Frost heave ratio was the highest around 0 $^{\circ}C$ and the maximum frost heave pressure was observed when deformation ratio was less than 10% which was the stability state of soil freezing. The state had no relation with frost depth. Over freezing process was observed when drainage or suction freezing process was undergone. Drainage freezing process was observed if freezing velocity was high under confined pressure and suction frost process was occurred if the velocity was low under the same confined process.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.335-340
• /
• 2010

This paper is about a projection method to check existence of radius groove penetration of screw after distal radius fracture operation using the T-type plate. Angle of Radius groove was analyzed by fifty one CT images that contains patients' wrist and twenty cases of radius specimens. After making radius phantom by plaster, we set the screw so that it penetrated 2.4 mm depth of radius groove. Then, we projected the phantom by X-ray in change of the elevation and supination angle of distal radius by 5 degree interval on 0~30 degree. The average value of groove angle in the wrist CT images was 14.4 degree and the radius specimens was 16.3 degree. Screws penetrating radius groove of the phantom have different lengths according to elevation angle and supination angle. Consequently, in order to confirm existence and nonexistence of radius groove penetration of the screw in tangential projection after distal radius fracture operation using the T-type plate, we recommend 5 degree of elevation angle and 20 degree of supination angle.