• STI Policy Review
• /
• v.2 no.3
• /
• pp.35-44
• /
• 2011

Korea has rapidly increased R&D investment over the last few decades and the intensity of R&D investment is among the highest in the world; however, there are serious concerns about R&D performance and R&D efficiency. This study is to improve the economic assessment methodology regarding a feasibility study for national R&D programs that are thought to be one of the most prominent ways to enhance R&D efficiency. In order to improve the methodology of economic assessment, a few of important factors such as technical or market uncertainty, spillover effect, and R&D contribution ratio should be covered in the model. The focus of this article is technological and market uncertainty that has a close relation with strategic flexibility and utilization potential to increase the value of R&D programs. To improve the current linear and definitive R&D process, a new framework with strategic flexibility is suggested, in which the result of economic assessment that considers technological and market uncertainty is reflected in planning. That kind of feedback process is expected to enhance the value of the program/project as well as R&D efficiency.

• Smart Structures and Systems
• /
• v.15 no.1
• /
• pp.99-117
• /
• 2015

The Stonecutters Bridge (SCB) in Hong Kong is the third-longest cable-stayed bridge in the world with a main span stretching 1,018 m between two 298 m high single-leg tapering composite towers. A Wind and Structural Health Monitoring System (WASHMS) is being implemented on SCB by the Highways Department of The Hong Kong SAR Government, and the SCB-WASHMS is composed of more than 1,300 sensors in 15 types. In order to establish a linkage between structural health monitoring and maintenance management, a Structural Health Rating System (SHRS) with relevant rating tools and indices is devised. On the basis of a 3D space frame finite element model (FEM) of SCB and model updating, this paper presents the development of an SHR-oriented 3D multi-scale FEM for the purpose of load-resistance analysis and damage evaluation in structural element level, including modeling, refinement and validation of the multi-scale FEM. The refined 3D structural segments at deck and towers are established in critical segment positions corresponding to maximum cable forces. The components in the critical segment region are modeled as a full 3D FEM and fitted into the 3D space frame FEM. The boundary conditions between beam and shell elements are performed conforming to equivalent stiffness, effective mass and compatibility of deformation. The 3D multi-scale FEM is verified by the in-situ measured dynamic characteristics and static response. A good agreement between the FEM and measurement results indicates that the 3D multi-scale FEM is precise and efficient for WASHMS and SHRS of SCB. In addition, stress distribution and concentration of the critical segments in the 3D multi-scale FEM under temperature loads, static wind loads and equivalent seismic loads are investigated. Stress concentration elements under equivalent seismic loads exist in the anchor zone in steel/concrete beam and the anchor plate edge in steel anchor box of the towers.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.418-421
• /
• 2007

It is important to maintain information by application or 3D modeling through the satellite and UAV image which is a real world. The prevention business has recognized the need for accurate 3-D geospatial information around the disaster region to identify objects to 3D modeling. In this paper, we presented an approach to create 3D model and loading, processing the image using GIS techniques, and the digital topographic maps were used for the DEM and the features of the area. The result is a implementation of the simple application that illustrates the objects in 3-D. The presented approach will be used for identifying objects and assisting in regional planning around the airfields.

• Journal of Sensor Science and Technology
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2014

Vision is the most important sensing capability for both men and sensory smart machines, such as intelligent robots. Sensed real 3D world and its 2D camera image can be related mathematically by a process called camera calibration. In this paper, we present a novel linear solution of camera calibration. Unlike most existing linear calibration methods, the proposed technique of this paper can identify camera parameters explicitly. Through the step-by-step procedure of the proposed method, the real physical elements of the perspective projection transformation matrix between 3D points and the corresponding 2D image points can be identified. This explicit solution will be useful for many practical 3D sensing applications including robotics. We verified the proposed method by using various cameras of different conditions.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.127-136
• /
• 2009

This paper describes a 3D modeling system in Augmented Reality environment, named 3DARModeler. It can be considered a simple version of 3D Studio Max with necessary functions for a modeling system such as creating objects, applying texture, adding animation, estimating real light sources and casting shadows. The 3DARModeler introduces convenient, and effective human-computer interaction to build 3D models. The 3DARModeler targets nontechnical users. As such, they do not need much knowledge of computer graphics and modeling techniques. All they have to do is select basic objects, customize their attributes, and put them together to build a 3D model in a simple and intuitive way as if they were doing in the real world.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1933-1940
• /
• 2013

Recently, due to improvement of computer performance and development of information devices, technology of mobile augmented reality is proliferating rapidly. However, because most of contents are passive or limitary, user can not feel interest and immersion. This paper designs interaction user interface system of 2 dimensional drawing based on mobile augmented reality to make bi-directional communication between the real world and the virtual world possible by using the vision based augmented reality and the database system.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.119-131
• /
• 2019

Time dependent creep settlements are one of the most important causes of material deteriorations for the huge water structures such as concrete faced rockfill dams (CFRDs). For this reason, performing creep analyses of CFRDs is vital important for monitoring and evaluating of the future and safety of such dams. In this study, it is observed how changes viscoplastic behaviour of a CFR dam depending the time. Ilısu dam that is the longest concrete faced rockfill dam (1775 m) in the world is selected for the three dimensional (3D) analyses. 3D finite difference model of Ilısu dam is modelled using FLAC3D software based on the finite difference method. Two different special creep material models are considered in the numerical analyses. Wipp-creep viscoplastic material model and burger-creep viscoplastic material model were rarely used for the creep analyses of CFRDs in the last are taken into account for the concrete slab and rockfill materials-foundation, respectively. Moreover, interface elements are defined between the concrete slab-rockfill materials and rockfill materials-foundation to provide interaction condition for 3D model. Firstly, dam and foundation are collapsed under its self-weight and static behaviour of the dam is evaluated for the empty reservoir conditions. Then, reservoir water is modelled considering maximum water level of the dam and time-dependent creep analyses are performed for maximum reservoir condition. In this paper, maximum principal stresses, vertical-horizontal displacements and pore pressures that may occur on the dam body surface during 30 years (from 2017 to 2047) are evaluated in detail. According to numerical analyses, empty and maximum reservoir conditions of Ilısu dam are compared with each other in detail. 4 various nodal points are selected under the concrete slab to better seen viscoplastic behaviour changes of the dam and viscoplastic behaviour differences of these points during 30 years are graphically presented. It is clearly seen that horizontal-vertical displacements and principal stresses for maximum reservoir condition are more than the empty reservoir condition of the dam and significant pore pressures are observed during 30 years for maximum reservoir condition. In addition, horizontal-vertical displacements, principal stresses and pore pressures for 4 nodal points obviously increased until a certain time and changes decreased after this time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.3035-3041
• /
• 2014

The steadicam effects is widely used in production of the 3D animation for natural camera movement. Conventional method for steadicam effects is using keyframe animation technique, which is annoying and time consuming process. Furthermore it is difficult and unnatural to simulate camera movement in real world. In this paper we propose a novel method for representing steadicam effects on virtual camera of 3D animation. We modeled a camera of real world into Maya production tools, considering gravity, mass and elasticity. The model is implemented with Python language, which is directly applied to Maya platform as a filter module. The proposed method reduces production time and improves production environment. It also makes more natural and realistic footage to maximize visual effects.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.247-252
• /
• 2008

Recently, the virtual construction system in which project participants efficiently share and control the information throughout the life-cycle of construction project using 3D object models is being developed all over the world. In this paper, a design of interface between 3D object model of structures and structural analysis system that is essential for the analysis and design of civil structures in the virtual space is treated. The relation parametric modeling technique that is needed to make the 3D object models and the construction method of product breakdown structure(PBS) that considers the several parameters for the structural analysis are presented. PBS is built so that it is possible to extract needed attribute information from 3D object model and to apply it to the structural analysis. Design methodology for interface program is proposed that several numerical values determined by the cooperative work same as structural analysis are delivered to 3D object models without additional work. An interface program between 3D object models and structural analysis system developed based on the proposed method would be effectively used to develop virtual construction system.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1122-1131
• /
• 2019

This paper covers research on terrain construction for unmanned aerial vehicle simulators using spatial information that was distributed by public institutions. Aerial photography, DEM, vector maps and 3D model data were used in order to create a realistic terrain simulator. A data converting method was suggested while researching, so it was generated to automatically arrange and build city models (vWorld provided) and classification methods so that realistic images could be generated by 3D objects. For example: rivers, forests, roads, fields and so on, were arranged by aerial photographs, vector map (land cover map) and terrain construction based on the tile map used by DEM. In order to verify the terrain data of unmanned aircraft simulators produced by the proposed method, the location accuracy was verified by mounting onto Unreal Engine and checked location accuracy.