• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.253-261
• /
• 1997

In general, the transformation of coordinates in GPS is carried out by 3 dimensional transformation method with 3-10 parameter. In korea, the coordinates of transformation points ware determined are adjusted in-dependently by planimetry and the height, and also the weight of observations were not properly applied to the adjustment. In this study, two different transformation methods are tested and analysed by the field test, and it is finally found that 2 dimensional method is more efficient way than 3 dimensional classical transformation method.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1463-1468
• /
• 2007

Emission of methyl bromide(MeBr) of soil fumigant was implicated in stratospheric ozone depletion. To determine the environmental fate for 1,3-dichloropene(1,3-D) of alternatives fumigants for MeBr, this paper researched the transformation for 1,3-D in water and soil. Half lives of cis-1,3-D in water with first-order kinetics are 9.9day and 1.7day at $25^{\circ}C\;and\;40^{\circ}C$, half lives of trans-1,3-D are 8.6day and 1.5day at $25^{\circ}C\;and\;40^{\circ}C$, respectively. Transformation for 1,3-D in water at high temperature faster then at low temperature. Hydrolysis for 1,3-D in water are unaffected at $pH\;2.5{\sim}pH\;10.0$, but hydrolysis for 1,3-D at pH 11.5 higher then at $pH\;2.5{\sim}pH\;10.0$. Half lives of cis-1,3-D in soil are 11.5day and 7.7day at 3% and 10% of soil moisture, half lives of trans-1,3-D are 9.9day and 6.9day at 3% and 10% of soil moisture, respectively. Transformation for 1,3-D in water increased with increasing soil moisture. Transformation for trans-1,3-D isomer are more rapid then cis-1,3-D isomer in water and soil. This research has identified that transformation for 1,3-dichloropropene are affected by temperature, pH, soil moisture, and isomer of cis and trans in water and soil.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.249-255
• /
• 2011

The free-stereo mosaics image without GPS/INS and ground control data can be generated by using relative orientation parameters on the 3D model coordinate system. Its origin is located in one reference frame image. A 3D coordinate calculated by conjugate points on the free-stereo mosaic images is represented on the 3D model coordinate system. For determining 3D coordinate on the 3D absolute coordinate system utilizing conjugate points on the free-stereo mosaic images, transformation methodology is required for transforming 3D model coordinate into 3D absolute coordinate. Generally, the 3D similarity transformation is used for transforming each other 3D coordinates. Error of 3D model coordinates used in the free-stereo mosaic images is non-linearly increased according to distance from 3D model coordinate and origin point. For this reason, 3D model coordinates used in the free-stereo mosaic images are difficult to transform into 3D absolute coordinates by using linear transformation. Therefore, methodology for transforming nonlinear 3D model coordinate into 3D absolute coordinate is needed. Also methodology for resampling the free-stereo mosaic image to the geo-stereo mosaic image is needed for overlapping digital map on absolute coordinate and stereo mosaic images. In this paper, we propose a 3D non-linear transformation for converting 3D model coordinate in the free-stereo mosaic image to 3D absolute coordinate, and a 2D non-linear transformation based on 3D non-linear transformation converting the free-stereo mosaic image to the geo-stereo mosaic image.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.133-141
• /
• 2023

In the recent context of the Fourth Industrial Revolution, there is growing interest in digital transformation and smart factory as a focal point. But, the Aerospace and Defense (A&D) sector has seen limited research on digital transformation, primarily concentrating on digitally-driven areas. The study validates hypotheses pertaining to the factors that facilitate successful digital transformation within the A&D sector and the influence of digital leadership and dynamic capabilities, employing statistical tools like SPSS and AMOS. The comprehensive analysis reveals that, similar to manufacturing industries, digital leadership in A&D companies exerts an influence on successful digital transformation through dynamic capabilities. Furthermore, digital transformation within the A&D sector has a positive impact on firm performance. This paper offers empirical insights into digital transformation within the A&D sector, shedding light on how successful digital transformation can be achieved within the domestic A&D industry.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.49-54
• /
• 2007

As digital contents based on 3D graphics are increased, the requirement for low power 3D graphic hardware for mobile devices is increased. We design a transformation engine for mobile 3D graphic processor. We propose a simplified transformation engine for mobile 3D graphic processor. The area of the transformation engine is reduced by merging a mapping transformation unit into a projective transformation unit and by replacing a clipping unit with a selection unit. It consists of a viewing transformation unit a projective transformation unit a divide by w nit, and a selection unit. It can process 32 bit floating point format of the IEEE-754 standard or a reduced 24 bit floating point format. It has a pipelined architecture so that a vertex is processed every 4 cycles except for the initial latency. The RTL code is verified using an FPGA.

• Archives of Pharmacal Research
• /
• v.13 no.1
• /
• pp.97-100
• /
• 1990

A convenient route is reported for the synthesis of fused pyrrolo [2, 3-d][1, 3]-oxazine and pyrrolo [2, 3-d]-pyrimidine derivatives from 2-amino-1-benzyl-3-t-butoxy-carbonyl-4, 5-dimethylpyrrole.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.125-131
• /
• 1986

In order to obtain the optimum conditions for intact yeast cell transformation in the various yeast host-vector systems, 3 yeast plasmid vectors, YRp7, YEpl3 and YIp5 were introduced into 5 yeast hosts, Saccaromyces cervisiae Dl3-1A, DKD-5D, DBY-746, MC-16 and S2022D with various transformation conditions, and plasmid stabilities in all the transformants were also observed. The highest transformation frequencies in all the host-vector system were obtained in the 16 hour Cultured cell (5.4 $\times$ 10$^6$ - 2.4 $\times$ 10$^8$cells/$m{\ell}$) treated with 0.1-0.2 M lithium chloride in 0.1 M tris-HCl (pH 7.6), 35% polyethylene glycol 4000, and heat-shocked at 42$^{\circ}C$ for 5 minutes after 60 minutes of induction. The intact cell transformation got more transformation frequency in DKD-5D (YRp7) and DBY-746 (YEpl3) than protoplast transformation, but reverse tendency was observed in DKD-5D (YEp13) and Dl3-lA (YRp7). The transformants, D13-1A (YRp7) and DKD-5D (YRp7) were very unstable in selective medium, with 80 to 85% of the transformants losing the plasmid after 70 generations, but the transformants, DKD-5D (YEpl3) and DBY-746 (YEpl3) were quite stable, with 35% of the transformants losing the plasmid.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.911-923
• /
• 2012

Recently, 3DTV and 3D displays have been released in the market. Accordingly, the production of stereoscopic images has gained much interest. Stereoscopic image being composed of left and right images are currently delivered to viewers without any modifications. The researches on the enhancement of depth perception using high-frequency components and the re-production of natural color by color compensation have been carried out for 2D images. The application of such 2D technologies to 3D stereoscopic images is an aim of this paper. This paper proposes the enhancement of 3D perception by color transformation. For this, we propose a stereo matching method for obtaining a depth map and two color transformation methods such as contrast transformation and background darkening. The effectiveness of the proposed method was verified through experiments.

• International journal of advanced smart convergence
• /
• v.13 no.3
• /
• pp.279-286
• /
• 2024

The preservation and transmission of intangible cultural heritage, such as traditional martial arts, have historically relied on manual processes that are both resource-intensive and costly. Due to budget limitations, many of these cultural assets are at risk of deterioration or remain hidden in museum storage, inaccessible to the public. To address these challenges, we propose a Digital Historical Data Transformation mechanism utilizing metaverse development techniques. This innovative approach converts 2D images into 3D representations, allowing for the extraction and visualization of associated actions in a three-dimensional space. By applying this methodology to the "Muyedobotongji," a classic text on traditional martial arts, we aim to digitally preserve these practices in a way that is both immersive and interactive. The transformation of static 2D images into dynamic 3D visualizations will not only enhance the restoration process but also make these cultural assets more accessible and engaging for future generations. This digital approach promises a more efficient and sustainable means of preserving intangible cultural heritage, ensuring that these traditions continue to thrive in the modern world.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.525-531
• /
• 2006

Synthesized 3-D CGH of a general three dimensional object is obtained by using a new 3-D coordinates transformation technique. A CCD camera is used to record several projected images of the 3-D object from different viewing angles. The recorded data are numerically calculated and processed to yield two-dimensional complex functions, which are then encoded fer the final synthesized 3-D CGH.