• 대한인간공학회지
• /
• 제28권4호
• /
• pp.117-124
• /
• 2009

To inspect the quality of data collected from a large-scale body measurement and investigation project, it is necessary to establish a proper data editing process. The three-dimensional body measurement may have measuring errors caused from measurer's proficiency or changes in the subject's posture. And it may also have errors caused in the process of algorithm expressing the information obtained from the three-dimensional scanner into numerical values, and in the course of data-processing dealing with numerous data for individuals. When those errors are found, the quality of the measured data is deteriorated, and they consequently reduce the quality of statistics which was conducted on the basis of it. Therefore this study intends to suggest a new way to improve the quality of the data collected from the three-dimensional body measurement by proposing a working procedure identifying data errors and correcting them from the whole data processing procedure-collecting, processing, and analyzing- of the 2004 Size Korea Three-dimensional Body Measurement Project. This study was carried out into three stages: Firstly, we detected erroneous data by examining of logical relations among variables under each edit rule. Secondly, we detected suspicious data through independent examination of individual variable value by sex and age. Finally, we examined scatter-plot matrix of many variables to consider the relationships among them. This simple graphical tool helps us to find out whether some suspicious data exist in the data set or not. As a result of this study, we detected some erroneous data included in the raw data. We figured out that the main errors are not because of the system errors that the three-dimensional body measurement system has but because of the subject's original three-dimensional shape data. Therefore by correcting some erroneous data, we have enhanced data quality.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• 한국의류학회지
• /
• 제45권3호
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.169-178
• /
• 2023

The extended use of polyester nowadays has increased the amount of waste polyester (PET) released into the environment. Although these materials don't directly harm living things or the ecosystem, their inability to biodegrade remains one of the major global threats, driving up the amount of solid waste made up of PET. Environmental concerns have approved an increasing interest in recycled PET however the production of recycled PET with sufficient mechanical properties is still a challenge. Recycled Polyester (rPET) yarns are inexpensive and have the potential to acquire better mechanical characteristics through physical treatments, particularly by using technically simple method like uniaxial drawing. This study inspected the drawn behavior of virgin PET yarns and rPET yarns under various drawing parameters by first analyzing the initial material characteristics of both yarn. The impact of stretching on mechanical and morphological properties was also investigated. The results showed that virgin PET has better properties than rPET yarn; however, mechanical properties resembling virgin PET are achieved after optimizing the draw ratio.

• 감성과학
• /
• 제16권3호
• /
• pp.397-408
• /
• 2013

최근 건강에 대한 관심의 증가와 고령화 사회의 진입으로 인해 센서 기반 스마트 의류는 다양한 어플리케이션과 타입으로 개발되고 있다. 센서기반 스마트 의류는 인체로부터 생체 신호를 측정, 모니터링을 주 목적으로하는 기능성 의류의 한 분야로 신호의 정확성, 기기의 착용성, 센서의 인체 적합성 등의 인체-기기-의류간의 상호작용을 고려하여 디자인되어야 한다는 점에서 기존의 스마트 의류와 다른 특성을 지닌다. 센서기반 스마트 의류의 이러한 특성은 의복의 제작 단계에 있어 요구공학의 단계를 기반으로 개발 목적에 대한 요구의 명확한 문서화 뿐 아니라, 각 단계 진행을 위해 기기분야와 의류분야간의 상호운용성 평가가 이루어져야 하는 필요성을 갖을 것으로 예상된다. 따라서, 본 연구에서는 요구공학이 적용된 센서 기반 스마트 의류 프로세스의 효용성 평가를 위해 실증적 수행 분석을 통해 스마트 의류의 기본 프로세스를 도출하고, 요구공학 분석기법의 단계를 도입하여 두가지 스마트 의류 프로세스를 도출하였다. 제시된 두 프로세스의 실증적 단계별 진행을 통해 프로세스의 효율성 및 디자인의 질적 평가를 수행하였으며, 요구공학이 적용된 센서 기반 스마트 의류의 프로세스의 효용성을 제시하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.20-20
• /
• 2012

최근, 수송기기 분야는 국제 환경규제 강화에 따른 CO2 절감, 연비향상, 경량화를 위한 기술적 수요가 증대되고 있으며, 그린카, 그린선박 등 친환경 수송기기에 대한 연구가 활발히 진행되고 있다. 하지만, 기존의 금속소재가 가지는 경량화의 한계를 극복하기 위해서는 CFRP, GFRP 등 금속대체 복합소재를 적용한 수송용 경량부품 개발에 대한 필요성이 요구되고 있다. 복합소재는 섬유사이에서 응력을 전달하는 기지(Matrix)와 하중을 전달하는 섬유(Fiber)의 종류와 양 및 적층 각도에 따라 수송용 부품에 적합한 기계적 특성을 얻을 수 있고, 높은 비강도와 비강성의 값을 갖게 되어 경량화가 용이한 장점이 있다. 반면, 섬유재의 종류, 성형방법, 경화온도 등에 따라 물리적 특성에 큰 변화가 발생하며, 수지의 경화조건에 따라 성형시간이 많이 소요되는 단점을 가지고 있다. 따라서, 본 연구에서는 자동차, 선박, 항공기, 철도차량 등 각종 수송기기의 경량화를 목적으로 생산성 향상 및 성형시간 절감을 위해 열가소성 수지, 저온속경화 수지를 적용하여, 경화 시간을 단축시키고, 3D-fabric 및 다층구조 직물을 Vacuum Infusion 공법으로 성형하여, 기존의 섬유재 적층시 소요되는 작업 공정을 간소화 할 수 있도록, 고속성형 복합소재를 적용한 수송용 경량부품 개발에 관한 연구를 수행하였다.

• 한국가정과학회지
• /
• 제9권1호
• /
• pp.43-50
• /
• 2006

The main colorant of Chelidonium majus extracts is a berberine which shows relatively good dyeability onto silk fabrics in the appropriate dyeing conditions without mordant, But cotton fabrics are difficult to dye with berberine because of the low substantivity the cationic to cellulosic fibers. we treated cotton fabrics using three types of polycarboxylic acid, DL-malic acid, citric acid, 1,2,3,4-butanetetracarboxylic acid(BTCA) to increase dyeability of Chelidonium majus extracts onto cotton fabrics. As a result the cotton fabrics treated with polycarboxylic acid could be dyed with Chelidonium majus extracts and also showed yellow vividly. The dye uptake were increased with increasing the number of carboxy groups. And so dye uptake resulted the largest in the BTCA solutions which have four carboxylic groups in the molecular unit. The optimal dyeing temperature a of Chelidonium majus extracts onto polycarboxylic acid treated cotton fabrics were $60^{\circ}C$. The dye equilibrium was reached 20 minutes after dyeing. Neutral pH of dye solutions showed in higher K/S value than acidic or alkaline conditions. But the colorfastness to washing and light according to polycarboxylic acid treat was not enhance.

• 한국의상디자인학회지
• /
• 제13권3호
• /
• pp.149-163
• /
• 2011

Hanjisa(Korean paper yarn), a new material made from the traditional Korean paper, has been developed through local R&D efforts, reflecting the current trend highly valuing environmental friendly. This new material is considered suitable for the 21C lifestyle and culture pursuing improved quality of human life and the environment. Therefore, this study aims to widely make known the originality and functions of the environmentally friendly Korean paper yarn, as well as to increase its commercial value. Furthermore, a new category of apparel design is presented by studying painting dyeing based on transformational tuck techniques and wax resist dyeing with formative features of repeated lines and rhythms of shells in order to implement three-dimensional and decorative artistic expressions. The texture of the Korean cotton paper yarn was particularly suitable to employ tuck and dyeing techniques Which express formative features of shell. Also, the material was useful for expressing the three-dimensional feelings with repeated curves and cross sections of shells. Moreover, paraffin resist dyeing and stitch techniques were used in order to avoid monotony and the images of shells visually materialized. Through the results stated above, this study could explore how to overcome obstacles to globalization of the Korean modern apparel such as its uniqueness, limit of materials or absense of internationality by applying modern design to the Korean paper fabrics. In the future, it is expected that more manufactures could produce and supply the new materials so as to make widely known the originality of the Korean paper fabrics and develop the material into a popular organic product fitting the modern lifestyle.

• 복식
• /
• 제60권6호
• /
• pp.89-100
• /
• 2010

This study is intended to analyze current status of costume in the cultural industry and explore feasibility of integrating costume as important cultural contents in the digital era. Among the websites for contents as the cultural archetypes, some have strong foundations while others don't. First, as for various archetypal characters restored based on the Korean history, most of their clothes focus on shapes and colors but lack details. They should be produced in 3D to provide back views or textile patterns to users. To ease understanding of the history of costume, user-friendly services such as launch of a pop-up window when users click on specific contents in question should be available for detailed information. At least there should be a link to other related sites where users can conveniently find more details. Second, some sites have too much data under one subject, increasing complexity and undermining orderliness. As a result, it takes long time to identify the site map. In this case, it is required to rearrange the contents with Quick View by subject and related links for in-depth study. Third, each subject is important to develop the archetypes for a variety of purposes. Creation of design derived from them or their commercialization can be an example but these activities should not restrict imagination of users or degrade the value of the archetypes. Last, it is needed to adopt validation system to detect the needs for a regular update (renewal) and to fix errors. We found many servers whose operation is not stable in general. When these technical issues are addressed for stable operation, users will rely on the sites to utilize them for their purpose of developing the cultural archetypes. In conclusion, advancement of www.culturecontent.com is essential. Based on efficient management and operation of the system, the quality of contents would be increased and multi-faceted advertising campaigns focusing on needs should be launched, to promote application of the contents. This is the recommendation for the future of the cultural archetype industry in Korea.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.345-354
• /
• 2018

Currently, layered geogrid method (LGM) is the commonly practiced technique for reinforcement of slopes. In this paper the geogrid-box method (GBM) is introduced as a new approach for reinforcement of rock-soil slopes. To achieve the objectives of this study, a laboratory setup was designed and the slopes without reinforcements and reinforced with LGM and GBM were tested under the loading of a circular footing. The effect of vertical spacing between geogrid layers and box thickness on normalized bearing capacity and failure mechanism of slopes was investigated. A series of 3D finite element analysis were also performed using ABAQUS software to supplement the results of the model tests. The results indicated that the load-settlement behavior and the ultimate bearing capacity of footing can be significantly improved by the inclusion of reinforcing geogrid in the soil. It was found that for the slopes reinforced with GBM, the displacement contours are widely distributed in the rock-soil mass underneath the footing in greater width and depth than that in the reinforced slope with LGM, which in turn results in higher bearing capacity. It was also established that by reducing the thickness of geogrid-boxes, the distribution and depth of displacement contours increases and a longer failure surface is developed, which suggests the enhanced bearing capacity of the slope. Based on the studied designs, the ultimate bearing capacity of the GBM-reinforced slope was found to be 11.16% higher than that of the slope reinforced with LGM. The results also indicated that, reinforcement of rock-soil slopes using GBM causes an improvement in the ultimate bearing capacity as high as 24.8 times more than that of the unreinforced slope.