• Title/Summary/Keyword: 3D TV

Search Result 494, Processing Time 0.025 seconds

3DTV 방송기술 개발 동향

  • 안충현
    • The Magazine of the IEIE
    • /
    • v.31 no.5
    • /
    • pp.82-95
    • /
    • 2004
  • 3차원 TV 방송 기술(3D Tele-vision), 이 중에서도 스테레오스코픽3DTV기술은 다시점 스테레오스코픽(stereoscopic) 비전 기술을 적용하여 2차원 영상에 깊이 정보를 부가하고, 이 깊이 정보로 인하여 시청자가 마치 영상이 제작되고 있는 현장에 있는 것 같은 생동감 및 현실감을 느낄 수 있게 하는 방송 기술로서 HDTV의 뒤를 이을 차세대 방송기술의 하나로서 기대되고 있다. 현재, 세계적인 규모의 박람회나 전시장 등의 이벤트 행사장에서는 반드시라고 해도 될만큼 3D 디스플레이를 사용한 전시 시설이 설치되어 있으며, 생동감 있는 3D 영상을 즐길 수 있다. 3차원 영상은 눈앞에 펼쳐진 장면을 잡으려고 손을 내밀어 버리거나, 전방에서 다가오는 영상을 엉겁결에 피하거나 할 만큼, 종래의 2D 영상과는 전혀 다른 시각적 효과를 가지고 있다.(중략)

  • PDF

SIP based Tunable BPF for UHF TV Tuner Applications (UHF대역 TV 튜너에 적용을 위한 가변형 대역통과필터)

  • Lee, Tae-C.;Park, Jae-Y.
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.57 no.11
    • /
    • pp.2127-2130
    • /
    • 2008
  • In this paper, a tunable bandpass filter with mutual inductive coupling circuits is newly designed and demonstrated for UHF TV tuner ranged from Ch.14(473MHz) to Ch.69(803MHz) applications. Conventional HF tuning circuit with an electromagnetic bandpass filter has several problems such as large size, high volume and high cost, since the electromagnetic filter is comprised of several passive components and air core inductors to be assembled and controlled manually. To address these obstacles, peaking chip inductor was newly applied for constructing the mutual inductive coupling circuit. The proposed circuit was newly and optimally designed, since the chip inductor showed lower components Q-value than the air core inductor. A varactor diode has been also used to fabricate the proposed tunable bandpass filter for RF tuning circuit. The fabricated tunable filter exhibited low insertion loss of approximately -3dB, high return loss of below -10dB, and large tuning bandwidth of 330MHz.

Next-generation loudspeaker layout for Ultra High Definition (UHD) Digital TV (초고선명 디지털 TV 를 위한 차세대 라우드스피커 레이아웃)

  • Lee, Young Woo;Kim, Sunmin
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2011.07a
    • /
    • pp.57-60
    • /
    • 2011
  • 본 논문에서는 초고선명 디지털 TV 를 위한 차세대 멀티채널 사운드 시스템의 최적의 라우드스피커 레이아웃을 도출하기 위해 다양한 라우드스피커 배치 환경에서 인지 관점의 오디오 음질 주관평가를 실시하였다. NHK 22.2 채널 시스템, ITU-R BS.775-2 표준의 7.1 채널 시스템과, 실감 음향에 가장 중요한 역할을 하는 Top Layer 라우드스피커에 중점을 두고 다양한 신규 레이아웃 구성들을 비교하였으며, 스튜디오에서 믹싱된 컨텐츠와 B-format 레코딩을 멀티채널로 생성한 컨텐츠를 이용하여 주관 평가를 실시하였다. 주관 평가 결과, Top Layer 에 3 개의 라우드스피커를 가지는 10.2 채널 라우드스피커 레이아웃이 평가에서 사용된 전체적인 오디오 음질의 등급에서 NHK 22.2 채널 시스템과 차이를 인지하기 어렵다는 결과를 도출하였다.

  • PDF

Augmented Broadcasting Service Platform Implementation (증강방송 서비스 플랫폼의 구현)

  • Ha, Jeounglak;Jeong, Young-Ho;Hong, Jin Woo
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2013.06a
    • /
    • pp.130-133
    • /
    • 2013
  • 방송 수신기는 종래의 디지털 방송 프로그램의 시청을 넘어서 인터넷 연결을 제공하는 스마트 TV 로 발전하고 있다. 본 논문은 초기 스마트 TV 의 단순한 인터넷 접속 기능을 넘어서 스마트 TV 가 가진 하이브리드 망 접속 능력을 십분 활용할 수 있는 증강방송 서비스를 실현하기 위한 증강방송 서비스 플랫폼의 구현기술을 소개한다. 증강방송은 방송사에서 송출하는 방송 프로그램과 융화된 양방향 실감형, 몰입형 증강 콘텐츠를 시청자에게 제공한다. 증강 콘텐츠는 시청자의 방송 프로그램 시청을 도와줄 수 있는 2D, 3D 그래픽 콘텐츠뿐만 아니라 촉각 등의 다양한 형태의 미디어로 제공 가능하다.

  • PDF

Technology Strategy based on Patent analysis (특허분석을 이용한 기술전략수립)

  • Kim, Jong-Chan;Lee, Joon-Hyuck;Park, Sang-Sung;Jang, Dong-Sik
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.26 no.2
    • /
    • pp.141-146
    • /
    • 2016
  • By occasion of propagation of 3D TV, technology of glassless 3D display is increasingly important. Currently, there was no lead technology In this technology. Thus it is important to develop differentiated technology for secure competitiveness. In this paper, We analyze patents for R&D strategy about glassless 3D display. Through Company-Technology matrix analysis and Patent trend analysis, We extract promising technology field and core technology. Lastly We suggest R&D strategy by using patent road map.

An Implementation of Highly Integrated Signal Processing IC for HDTV

  • Hahm Cheul-Hee;Park Kon-Kyu;Kim Hyoung-Gil;Jung Choon-Sik;Lee Sang-keun;Jang Jae-Young;Park Sung-Uk;Chon Byung-Hoan;Chun Kang-Wook;Jo Jae-Moon;Song Dong-il
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.69-72
    • /
    • 2003
  • This paper presents a signal processing IC for digital HDTV, which is designed to operate in bunt-in HDW or in HD-set-top Box. The chip supports de-multiplexing an ISO/IEC 13818-1 MPEG-2 TS stream. It decodes MPEG-2 MP@HL video bitstream, and provides high-quality scaled video for display on HDTV monitor. The chip consists of ARM7TDMI for TS-Demux, PCI interface, Audio interface, MPEG2 MP@HL video decoder Display processor, Graphic processor, Memory controller, Audio int3face, Smart Card interface and UART. It is fabricated using Sam sung's 0.18-um and the package of 492-pin BGA is used.

  • PDF

Development of HEA for Terrestrial Digital TV (지상파 DTV 용 HPA 개발)

  • 송명선;이재욱;김혁제;강상기;최재익
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 1999.06b
    • /
    • pp.9-13
    • /
    • 1999
  • 이 논문은 디지털 TV 송신기의 구성 시스템 중 하나인 HPA 서브시스템(이하 HPA 시스템이라고 함)을 구현하는 구현 기술에 대하여 기술한다. HPA 시스템은 레벨 제어부, HPA 모듈, 고출력 결합기, 여파기, HPA 감시, 경보 및 제어 시스템으로 구성되어 있다. 이를 구현하기 위해서 전력레벨을 설계하고, 각 레벨에 맞는 4Wpeak, 30Wpeak, 125Wpeak 단위 증폭기를 설계, 제작 시험하였으며, 이들 단위 증폭기를 전력 분배기/결합기를 이용하여 결합하여 600Wpeak급 HPA 모듈을 제작하였다. 자체 제작한 HPA 모듈과 상용 부품을 이용하여 HPA 서브시스템을 구성하였으며, 현장시험을 통하여 그 성능을 입증하였다. 개발한 HPA 시스템은 동작주파수 470MHz-510MHz, 최대출력 1.6kWpeak, 이득 60dB 이상, 채널내 이득 평탄도 0.6dB 이하, 입력 반사손실 -l8dB이하이며, IMD는 3dB back-off시 -35dB이하이다

  • PDF

TV White Space Low-noise and High-Linear RF Front-end Receiver (텔레비전 유휴 주파수 대역을 지원하는 저잡음 및 고선형 특성의 RF 수신기 설계)

  • Kim, Chang-wan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.22 no.1
    • /
    • pp.91-99
    • /
    • 2018
  • This paper has proposed a low-noise and high-linear RF receiver supporting TV white space from 470 MHz to 698 MHz), which is implemented in $0.13-{\mu}m$ CMOS technology. It consists of a low-noise amplifier, a RF band-pass filter, a RF amplifier, a passive down-conversion mixer, and a channel-selection low-pass filter. A low-noise amplifier and RF amplifier provide a high voltage gain to improve the sensitivity level. To suppress strong and nearby interferers, two RF filtering schemes have been performed by using a RF BPF and a down-conversion mixer. The proposed LPF has been based on the common-gate topology and adopted a bi-quad cell to achieve -24dB/oct characteristics. In addition, the RF receiver can support the overall TV band by controlling a LO frequency. The simulated results show a voltage gain of 56 dB, a noise figure of less than 2 dB, and an out-of-channel IIP3 of -2.3 dBm. It consumes 37 mA from a 1.5 V supply voltage.

A GPU based Rendering Method for Multiple-view Autostereoscopic Display (무안경식 다시점 입체 디스플레이를 위한 GPU기반 렌더링 기법)

  • Ahn, Jong-Gil;Kim, Jin-Wook
    • Journal of the HCI Society of Korea
    • /
    • v.4 no.2
    • /
    • pp.9-16
    • /
    • 2009
  • 3D stereo display systems gain more interests recently. Multiple-view autostereoscopic display system enables observers to watch stereo image from multiple viewpoints not wearing specific devices such as shutter glasses or HMD. Therefore, the Multiple-view autostereoscopic display is being spotlighted in the field of virtual reality, mobile, 3D TV and so on. However, one of the critical disadvantages of the system is that observer can enjoy the system only in a small designated area where the system is designed to work properly. This research provides an effective way of GPU based rendering technique to present seamless 3D stereo experiences from an arbitrary observer's view position.

  • PDF

View Synthesis Using OpenGL for Multi-viewpoint 3D TV (다시점 3차원 방송을 위한 OpenGL을 이용하는 중간영상 생성)

  • Lee, Hyun-Jung;Hur, Nam-Ho;Seo, Yong-Duek
    • Journal of Broadcast Engineering
    • /
    • v.11 no.4 s.33
    • /
    • pp.507-520
    • /
    • 2006
  • In this paper, we propose an application of OpenGL functions for novel view synthesis from multi-view images and depth maps. While image based rendering has been meant to generate synthetic images by processing the camera view with a graphic engine, little has been known about how to apply the given images and depth information to the graphic engine and render the scene. This paper presents an efficient way of constructing a 3D space with camera parameters, reconstructing the 3D scene with color and depth images, and synthesizing virtual views in real-time as well as their depth images.