• 제목/요약/키워드: 3D Structure Integration

검색결과 110건 처리시간 0.024초

반도체 및 전자패키지의 방열기술 동향 (Heat Dissipation Trends in Semiconductors and Electronic Packaging)

  • 문석환;최광성;엄용성;윤호경;주지호;최광문;신정호
    • 전자통신동향분석
    • /
    • 제38권6호
    • /
    • pp.41-51
    • /
    • 2023
  • Heat dissipation technology for semiconductors and electronic packaging has a substantial impact on performance and lifespan, but efficient heat dissipation is currently facing limited improvement. Owing to the high integration density in electronic packaging, heat dissipation components must become thinner and increase their performance. Therefore, heat dissipation materials are being devised considering conductive heat transfer, carbon-based directional thermal conductivity improvements, functional heat dissipation composite materials with added fillers, and liquid-metal thermal interface materials. Additionally, in heat dissipation structure design, 3D printing-based complex heat dissipation fins, packages that expand the heat dissipation area, chip embedded structures that minimize contact thermal resistance, differential scanning calorimetry structures, and through-silicon-via technologies and their replacement technologies are being actively developed. Regarding dry cooling using single-phase and phase-change heat transfer, technologies for improving the vapor chamber performance and structural diversification are being investigated along with the miniaturization of heat pipes and high-performance capillary wicks. Meanwhile, in wet cooling with high heat flux, technologies for designing and manufacturing miniaturized flow paths, heat dissipating materials within flow paths, increasing heat dissipation area, and reducing pressure drops are being developed. We also analyze the development of direct cooling and immersion cooling technologies, which are gradually expanding to achieve near-junction cooling.

GEOTECHNICAL DESIGNS OF THE SHIP IMPACT PROTECTION SYSTEM FOR INCHEON BRIDGE

  • Choi, Sung-Min;Oh, Seung-Tak;Park, Sang-Il;Kim, Sung-Hwan
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회 3차
    • /
    • pp.72-77
    • /
    • 2010
  • The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

  • PDF

슬롯결합을 이용한 발진기형 능동 안테나의 설계 및 제작 (Design and Fabrication of the Oscillator Type Active Antenna by Using Slot Coupling)

  • 문철;윤기호;장규상;박한규;윤영중
    • 한국전자파학회논문지
    • /
    • 제8권1호
    • /
    • pp.13-21
    • /
    • 1997
  • 본 논문에서는 능동 위상배열안테나(Active phased array antennas)의 구성소자로 사용될 수 있는 슬롯결합을 이용한 발진기형 능동안테나를 설계, 제작하였다. 배열 안테나 특히 평면 배열 얀테냐에 적합한 급전구조인 슬롯결합을 이용하여 방사소자와 능동회로룹 각각의 기판에 제작한 후 접지면의 슬롯을 통하여 전자기적으로 결합하였다 이와 같은 구조는 배열 안테나로 구성할 경우 단일 평면상에 안테나와 발진회로를 집적하는 구조에서 발생하는 안테나의 협대역 문제, 능동회로에 의한 기생방사, 집적의 문제 등을 해결할 수 있을 것이다. 본 논문에서 설계, 제작한 발진기형 능동안테나는 FET의 드레인 바이어스 전압을 조정하여 발진 주파수를 12.5 GHz를 중심으로 12.37 GHz에서 12.65 GHz까지 280 MHz (2.24%)의 주파수 범위를 선형적으로 조정할 수 있었다. 또한 주파수 가변범위 내에서의 출력이 5 dB 이내의 차이를 가짐으로서 거의 일정하였다. 따라서 본 논문에서 설계, 제작한 능동 안테나를 선형이나 평면의 능동 배열 안테나 소자로 사용할 수 있을 것이다.

  • PDF

고속/고집적 ATM Switching MCM 구현을 위한 설계 Library 구축 밀 시험성 확보 (Generation of Testability on High Density /Speed ATM MCM and Its Library Build-up using BCB Thin Film Substrate)

  • 김승곤;지성근;우준환;임성완
    • 마이크로전자및패키징학회지
    • /
    • 제6권2호
    • /
    • pp.37-43
    • /
    • 1999
  • 대용량, 고속 정보처리가 요구되는 시스템의 모듈은 데이터 처리의 고속성 및 회로의 고집적이 가능한 MCM의 형태로 구현되어 ATM, GPS 및 PCS 등의 분야에 광범위하게 응용되고 있다. 3개의 칩으로 구성되고 2.48 Gbps의 데이터 처리용량을 가지는 ATM Switching 모듈을 기판 Size 48$\times$48mm2, Cu/PhotoBCB를 이용한 10 Multi-Layer 그리고 491 Pin PBGA 형태의 MCM을 개발하였다. MCM 개발을 위해 요구되는 기술로는 고속신호 특성구현을 위해 Interconnect Characterization을 통한 기판/ 패키지의 설계 파라미터 추출, 고밀도 MCM 에서의 방열처리 그리고 MCM 개발의 가장 난점중의 하나인 시험성 확보를 들 수 있다. ATM Switching MCM 개발을 위해 MCM-D 기판에서의 Interconnect Characterization을 통한 신호지연, 비아특성, 신호간섭(Cross-talk) 파라미터 등을 추출하였다. 고집적 구조에서 15.6Watt의 방열처리를 위해 열 해석을 진행하고 기판에 열 비아 1.108개를 형성하고 패키지 전체에 $85^{\circ}C$ 이하 유지조건의 방열처리를 하였다. 마지막으로 시험성 확보를 위해 미세 간격 프로빙을 통한 기판 검증 및 복잡한 패키지/어셈블리 공정검증을 위해 Boundary Scan Test(BST)를 적용하여 효과적이고 비용 절감형의 제품을 개발하였다.

  • PDF

IFC를 이용한 설계정보관리시스템 핵심부 구축 (Design Information Management System Core Development Using Industry Foundation Classes)

  • 이근형;진상윤;김재준
    • 한국건설관리학회논문집
    • /
    • 제1권2호
    • /
    • pp.98-107
    • /
    • 2000
  • 최근 건설산업에서 컴퓨터의 활용이 일반화되어 가면서, CAD, PMIS(Project Management Information System), 구조해석 프로그램, 공정관리 프로그램 등을 통해서 발생하는 정보의 양은 급증하고 있다. 그 정보의 양이 방대해지고, 복잡해지면서 이들 정보를 효과적으로 관리하며, 재활용하는 것이 건설산업의 생산성을 좌우하는 요소가 되어가고 있다. 이러한 상황에서 건설업에서의 정보기술과 CIC(Computer Integrated Construction)에 대한 연구가 진행되고 있다. 최근에는 프로덕트 모델을 이용하여 정보를 통합하기 위한 방안으로 IFC(Industry Foundation Classes)가 IAI에 의해 개발되어서 이를 이용한 정보 공유 및 활용에 대한 연구가 수행되고 있다. 하지만, 이들 연구가 아직 초기 단계에 머물러 있고, 대부분 개념적인 내용을 중심으로 이루어지고 있다. 따라서 IFC를 이용한 설계정보관리시스템 구축을 위한 좀 더 구체적인 모델과 구축 프로세스에 대한 연구가 필요한 상황이다. 본 연구의 목적은 IFC를 이용하기 위해 필요한 요소 기술을 조사하고, 이를 이용해서 IFC를 활용한 설계정보관리시스템의 모델을 제시하고, 제시된 모델에서 핵심적인 기능을 수행하는 프로젝트 데이터베이스와 프로덕트 프레임워커의 역할과 이들을 구축하기 위한 프로세스를 밝히는데 있다. 이들의 주된 역할은 건축정보와 구조정보의 통합과 프로덕트 정보의 다중 통합이며, 이들의 구현을 위한 프로세스로 먼저 '프로덕트 모델링' 과 '응용프로그램 개발' 의 두 가지를 상위단계의 활동으로 정의하고, 응용 프로그램 개발을 다시 'IFC스키마 컴파일', '클래스 컴파일', '프로젝트 데이터베이스 스키마 생성', '프로덕트 프레임워커 개발, '프로젝트 데이터베이스 생성'의 다섯 가지 활동으로 정의했다. 이러한 활동들을 위해 이용되는 도구들로 C++ 컴파일러, CAD, ST-Developer, ST-ObjectStore, ObjectStore 등을 제시했다. 이렇게 구축된 프로젝트 데이터베이스의 정보들은 인터넷을 이용한 분산기술과 XML을 이용해서 정보 관련자들 간의 공유 방안 및 '3차원 모델링', '프로덕트 정보 생성', '데이터베이스 생성 및 수정', '여러가지 체계에 따른 모델의 재구성', '모델별 도면 및 시방서 연결', '물량 정보 생성'의 다섯 단계로 제시하였다.

  • PDF

금융(金融)의 전업(專業) 및 겸업화(兼業化) 이론(理論): 금융산업조직론(金融産業組織論)의 모색(摸索) (A Theory on the Scope of Financial Activity)

  • 좌승희
    • KDI Journal of Economic Policy
    • /
    • 제13권1호
    • /
    • pp.167-197
    • /
    • 1991
  • 최근의 세계금융산업(世界金融産業)은 이종금융업무간(異種金融業務間)의 통합(統合)(겸업(兼業))과 동시에 이와는 반대로 개별업무(個別業務)의 분할현상(分割現象)을 동시에 같이 경험하고 있는데, 본고(本稿)는 이러한 금융산업조직(金融産業組織)의 내생적(內生的) 재편현상(再編現象)을 체계적으로 설명할 수 있는 금융산업조직이론(金融産業組織理論)을 모색하는 데 그 목적이 있다. 기존의 전문화(專門化)와 겸업화이론(兼業化理論)을 통합한 잠정적 분석체계는 대체로 다음과 같은 시사점을 주고 있다. 첫째로, 독자적으로는 규모(規模)의 경제(經濟)가 강하고 여타 업무와는 범위(範圍)의 비경제하(非經濟下)에 있거나 범위(範圍)의 경제(經濟)가 약한 업무는 기존 업무세트에서 분할(分割) 전문화(專門化)될 것이다. 둘째로, 여타업무와는 범위(範圍)의 경제(經濟)가 강하면서, 독자적으로는 규모(規模)의 비경제하(非經濟下)에 있거나 혹은 규모(規模)의 경제(經濟)가 약한 업무는 겸업(兼業)될 것이다. 셋째로, 자유금융하(自由金融下)의 경쟁금융산업균형(競爭金融産業均衡)은 겸업기업(兼業企業)과 전업기업(專業企業)이 공존하는 혼합균형(混合均衡)이 될 것이다. 넷째로, 금융산업조직(金融産業組織)의 국가별 차이는 금융시장(金融市場) 및 수요규모(需要規模)의 차이에 의해 결정되며, 최근 진행되고 있는 금융(金融)의 세계화(世界化) 국제화(國際化)는 각국이 직면하게 될 금융시장(金融市場)의 규모를 균등화시킴으로써 장기적으로 각국 금융산업조직(金融産業組織)의 동질화(同質化)를 촉진시킬 것이다. 다섯째로, 금융제도(金融制度)에 대한 인위적 규제가 없다면 겸업주의(兼業主義) 은행제도(銀行制度)는 금융시장(金融市場)의 규모(規模)가 상대적으로 작은 경제에서, 전업주의(專業主義) 은행제도(銀行制度)는 금융시장의 규모가 상대적으로 큰 경제에서 주로 관찰되게 될 것이다. 본고(本稿)는 이러한 시사점들을 응용하여 주요국에 있어서의 전업주의(專業主義)와 겸업주의(兼業主義) 은행제도(銀行制度)의 역사적 변천과정을 각국 금융시장규모(金融市場規模)의 변천과정에 의해 설명하고, 현재 구조변화(構造變化)를 경험하고 있는 세계각국(世界各國) 금융산업조직(金融産業組織)은 장기적으로 구조가 동질화(同質化)되면서 혼합균형상태(混合均衡狀態)로 이행해 나갈 것으로 전망하고 있다.

  • PDF

대기오염 배출량 변화의 경제적 요인 분해 (An Economic Factor Analysis of Air Pollutants Emission Using Index Decomposition Methods)

  • 박대문;김기흥
    • 자원ㆍ환경경제연구
    • /
    • 제14권1호
    • /
    • pp.167-199
    • /
    • 2005
  • 본 논문의 분석결과는 다음과 같다. 첫째, 환경부가 1991년부터 매년 조사, 발표하고 있는 "대기오염물질배출량"은 난방, 산업, 수송 및 발전의 4부문으로 분류되어 있어 자료의 활용가치가 매우 낮아 조사 통계 내용의 다양화 및 산업분류기준이 개선되어야 한다. 둘째, 대기오염 대량배출산업은 석탄 석유(s7), 전력 가스(s17), 운송 보관(s20) 산업이다. 이들 산업에 대한 기존의 대기규제정책은 다른 산업에 비해 비효율적이었다고 볼 수 있으며 향후 대기정책에서도 유념하여야 할 사항으로 여겨진다. 셋째, 시멘트 석회 석제(s10), 전력 가스(s17) 산업은 대량의 오염배출산업인 동시에 배출 유발효과도 상대적으로 가장 큰 산업이다. 넷째, 배출량 변화의 가장 큰 감소요인은 배출계수의 변화(${\Delta}f$)이며, 가장 큰 증가요인은 경제성장 효과(${\Delta}y$)였다. 생산 또는 투입기술의 변화(${\Delta}D$), 수요구조의 변화(${\Delta}u$)는 배출량 증감에 미치는 영향이 산업별로 다르게 나타났으나 그 영향은 미미하였다. 다섯째, 대기오염 총량관리제 도입, 고(高)오염산업의 차별관리 및 환경과 경제의 상생을 위한 대기정책의 효율적 시행을 위해서는 산업별 배출량 기본자료의 산정 방법 개선 및 경제적 분석과 평가 기준의 활용, 확대가 필요하다. 여섯째, 1990년대 한국의 경제성장은 1960~1970년대와 같이 배리 코머너 가설에 상응한 오염지향적 경제성장은 아니었으나 산업 전체의 기술 및 수요구조가 환경친화적이라 할 수도 없었다. 이것은 대기환경 개선을 위한 환경정책이 오직 환경당국의 환경정책수단에만 의존했을 뿐이며 국가경제 전체의 산업구조나 친환경 생산기술의 발전 등 범정부적 차원의 환경정책이 병행되지 못했음을 시사한다.

  • PDF

지대주 연결 형태와 골질에 따른 저작압이 임프란트 주위골내 응력분포에 미치는 영향 (Study on the stress distribution depending on the bone type and implant abutment connection by finite element analysis)

  • 박현수;임성빈;정진형;홍기석
    • Journal of Periodontal and Implant Science
    • /
    • 제36권2호
    • /
    • pp.531-554
    • /
    • 2006
  • Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

지식이전 선행요인에 관한 다차원 분석: 사회적 자본 이론과 사회연결망 이론의 결합 (Multi-level Analysis of the Antecedents of Knowledge Transfer: Integration of Social Capital Theory and Social Network Theory)

  • 강민형;허용석
    • Asia pacific journal of information systems
    • /
    • 제22권3호
    • /
    • pp.75-97
    • /
    • 2012
  • Knowledge residing in the heads of employees has always been regarded as one of the most critical resources within a firm. However, many tries to facilitate knowledge transfer among employees has been unsuccessful because of the motivational and cognitive problems between the knowledge source and the recipient. Social capital, which is defined as "the sum of the actual and potential resources embedded within, available through, derived from the network of relationships possessed by an individual or social unit [Nahapiet and Ghoshal, 1998]," is suggested to resolve these motivational and cognitive problems of knowledge transfer. In Social capital theory, there are two research streams. One insists that social capital strengthens group solidarity and brings up cooperative behaviors among group members, such as voluntary help to colleagues. Therefore, social capital can motivate an expert to transfer his/her knowledge to a colleague in need without any direct reward. The other stream insists that social capital provides an access to various resources that the owner of social capital doesn't possess directly. In knowledge transfer context, an employee with social capital can access and learn much knowledge from his/her colleagues. Therefore, social capital provides benefits to both the knowledge source and the recipient in different ways. However, prior research on knowledge transfer and social capital is mostly limited to either of the research stream of social capital and covered only the knowledge source's or the knowledge recipient's perspective. Social network theory which focuses on the structural dimension of social capital provides clear explanation about the in-depth mechanisms of social capital's two different benefits. 'Strong tie' builds up identification, trust, and emotional attachment between the knowledge source and the recipient; therefore, it motivates the knowledge source to transfer his/her knowledge to the recipient. On the other hand, 'weak tie' easily expands to 'diverse' knowledge sources because it does not take much effort to manage. Therefore, the real value of 'weak tie' comes from the 'diverse network structure,' not the 'weak tie' itself. It implies that the two different perspectives on strength of ties can co-exist. For example, an extroverted employee can manage many 'strong' ties with 'various' colleagues. In this regards, the individual-level structure of one's relationships as well as the dyadic-level relationship should be considered together to provide a holistic view of social capital. In addition, interaction effect between individual-level characteristics and dyadic-level characteristics can be examined, too. Based on these arguments, this study has following research questions. (1) How does the social capital of the knowledge source and the recipient influence knowledge transfer respectively? (2) How does the strength of ties between the knowledge source and the recipient influence knowledge transfer? (3) How does the social capital of the knowledge source and the recipient influence the effect of the strength of ties between the knowledge source and the recipient on knowledge transfer? Based on Social capital theory and Social network theory, a multi-level research model is developed to consider both the individual-level social capital of the knowledge source and the recipient and the dyadic-level strength of relationship between the knowledge source and the recipient. 'Cross-classified random effect model,' one of the multi-level analysis methods, is adopted to analyze the survey responses from 337 R&D employees. The results of analysis provide several findings. First, among three dimensions of the knowledge source's social capital, network centrality (i.e., structural dimension) shows the significant direct effect on knowledge transfer. On the other hand, the knowledge recipient's network centrality is not influential. Instead, it strengthens the influence of the strength of ties between the knowledge source and the recipient on knowledge transfer. It means that the knowledge source's network centrality does not directly increase knowledge transfer. Instead, by providing access to various knowledge sources, the network centrality provides only the context where the strong tie between the knowledge source and the recipient leads to effective knowledge transfer. In short, network centrality has indirect effect on knowledge transfer from the knowledge recipient's perspective, while it has direct effect from the knowledge source's perspective. This is the most important contribution of this research. In addition, contrary to the research hypothesis, company tenure of the knowledge recipient negatively influences knowledge transfer. It means that experienced employees do not look for new knowledge and stick to their own knowledge. This is also an interesting result. One of the possible reasons is the hierarchical culture of Korea, such as a fear of losing face in front of subordinates. In a research methodology perspective, multi-level analysis adopted in this study seems to be very promising in management research area which has a multi-level data structure, such as employee-team-department-company. In addition, social network analysis is also a promising research approach with an exploding availability of online social network data.

  • PDF

한국수산업의 해외진출전략에 관한 연구 (Foreign Entry Strategies for Korean Fishery Firms)

  • 김회천
    • 수산경영론집
    • /
    • 제15권1호
    • /
    • pp.131-153
    • /
    • 1984
  • Fishery resources are still abundant compared with other resources and the possibility of exploitation is probably great. The Korean fishery industry has grown remarkably since 1957, and Korea is ranked as one of the major fishery countries. Its of fishery products reached the 9th in the world and the value of exports was 5th in 1982. But recently a growth rate has slowed down, due to the enlargement of territorial seas by the declaration of the 200 mile, Exclusive Economic Zone, the tendency to develop fishery resources strate-gically in international bargaining, the change in function of the international organizations, the expansion of regulated waters, the illegal arrest of our fishing boats, the rapid rise in oil prices, and the fall in fish prices, the development of fishery resources as a symbol of nationalism, the fishing boats decreptitude, the rise of crew wages, regulations on fishing methods, fish species, fishing season, size of fish, and mesh size, fishing quotas and the demand of excessive fishing royalties. Besides the the obligation of coastal countries, employing crews of their host countries is also an example of the change in the international environment which causes the aggravation of foreign profit of fishing firms. To ameliorate the situation, our Korean fishery firms must prepare efficient plans and study systematically to internationalize themselves because such existing methods as conventional fishing entry and licence fishing entry are likely to be unable to cope with international environmental change. Thus, after the systematic analysis of the problem, some new combined alternatives might be proposed. These are some of the new schemes to support this plan showing the orientation of our national policy: 1. Most of the coastal states, to cope with rapid international environmental change and to survive in the new era of ocean order, have rationalized their higher governmental structure concerning the fishery industries. And the coastal countries which are the objectives of our expecting entry, demand excessive economic and technical aid, limit the number of fishing boats’entry and the use of our foreign fishing bases, and regulate the membership of the international fishery commissions. Especially, most of the coastal or island countries are recently independent states, which are poorer in national budget, depend largely on fishing royalties and licence entry fees as their main resources of national finance. 2. Alternatives to our entry to deep sea fishing, as internationalization strategies, are by direct foreign investment method. About 30 firms have already invested approximately US $ 8 million in 9 coastal countries. Areas of investment comprise the southern part of the Atlantic Ocean, the Moroccan sea and five other sea areas. Trawling, tuna purse seining and five other fields are covered by the investment. Joint-venture is the most prominent method of this direct investment. If we consider the number of entry firms, the host countries, the number of seas available and the size of investment, this method of cooperation is perhaps insufficient so far. Our fishery firms suffer from a weakness in international competitive ability, an insufficiency of information, of short funds, incompetency in the market, the unfriendliness of host coastal countries, the incapability of partners in joint-ventures and the political instability of the host countries. To enlarge our foreign fishing grounds, we are to actively adopt the direct investment entry method and to diversity our collaboraboration with partner countries. Consequently, besides proper fishing, we might utilize forward integration strategies, including the processing fied. a. The enterprise emigration method is likely to be successful in Argentina. It includes the development of Argentinian fishing grounds which are still not exploited in spite of abundant resources. Besides, Arentina could also be developed as a base for the exploitation of the krill resources and for further entries into collaboration with other Latin American countries. b. The co-business contract fishing method works in American territorial seas where American fishermen sell their fishery products to our factory ships at sea. This method contributes greatly to obtaining more fishing quotas and in innovation bottom fishing operation. Therefore we may apply this method to other countres to diffuse our foreign fishing entry. c. The new fishing ground development method was begun in 1957 by tuna long-line experimental fishing in the Indian Ocean. It has five fields, trawling, skipjack pole fishing and shrimp trawling, and so on. Recently, Korean fisheries were successful in the development of the Antarctic Ocean krill and tuna purse seining. 3. The acceleration of the internationalization of deep sea fishing; a. Intense information exchange activities and commission participation are likely to be continues as our contributions to the international fishery organizations. We should try to enter international fishery commissions in which we are not so far participating. And we have to reform adequately to meet the changes of the function of the international commissions. With our partner countries, we ought to conclude bilateral fishery agreements, thus enlarging our collaboration. b. Our government should offer economic and technical aids to host countries to facilitate our firms’fishery entry and activities. c. To accelerate technical innovation, our fishery firms must invest greater amount in technical innovation, at the same time be more discriminatory in importing exogeneous fishery technologies. As for fishing methods; expanded use of multi-purpose fishing boats and introduction of automation should be encuraged to prevent seasonal fluctuations in fishery outputs. d. The government should increases financial and tax aid to Korean firms in order to elevate already weak financial structure of Korean fishery firms. e. Finally, the government ought to revise foreign exchange regulations being applied to deep sea fishery firms. Furthermore, dutes levied on foreign purchaed equipments and supplies used by our deep sea fishing boats thould be reduced or exempted. when the fish caught by Korean partner of joint-venture firms is sold at the home port, pusan, import duty should be exempted.

  • PDF