• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.183-191
• /
• 2018

This study is to examine the effects of Socially Prescribed Perfectionism on depression by Intolerance of Uncertainty and Unconditional Self Acceptance, and to well being to improve the positive life of college students. This study is conducted on 238 college students who are influenced by Socially Prescribed Perfectionism, Intolerance of Uncertainty, Unconditional Self Acceptance, and Depression. This study analyzed a questionnaire consisted of a sub-component of the Multidimensional Perfectionism Scale (MPS), a Intolerance of Uncertainty Scale(IUS), an Unconditional Self Acceptance Questionnaire-R(USAQ-R), and a depression scale (CES-D) and verified correlation analysis and structural equation model. The results of this study showed that socially prescribed perfectionism had significant negative correlations with intolerance of uncertainty, and had significant positive correlation with unconditional self acceptance. The results of the structural equation model showed full mediating effect of the intolerance of uncertainty and unconditional self acceptance between Socially prescribed perfectionism and depression, Finally, implications and suggestions are suggested in this study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.631-637
• /
• 2003

We have evaluated structural and electric, ferroelectric properties of PZT(30/70) thick film prepared by using 1,3-propanediol based sol-gel method on Pt/Ti/SiO$_2$/Si substrates. Rapid thermal annealing (RTA) is used to reduce the thermal stress and final furnace annealing is processed at $650^{\circ}C$. As the results of SEM analysis, we find that we get 350 nm in thickness for one coating and 1 $\mu$m for three times of coating. In the results of C-D analysis at 1 kHz, dielectric constant ($\varepsilon$$_{r}$) and dissipation factor were 886 and 0.03, respectively. C-V curve is shaped as a symmetrical butterfly. Leakage current density at 200 kV/cm is 1.23${\times}$10$^{-5}$ A/cm$^2$ and in the results of hysteresis loops measured at 150 kV/cm, the remnant polarization (P$_{r}$) and the coercive field (E$_{c}$) are 33.8 $\mu$C/cm$^2$ and 56.9 kV/cm, respectively. PZT(30/70) thick film exhibits relatively good ferroelectric, electric properties.s..

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.119-133
• /
• 2022

The COVID-19 pandemic is rapidly changing the behavior of members of society. Typically, the strong contagious power of the virus minimizes interaction between people in the real world, and they keep interaction activities to a minimum through online activities. Recently, as people demand online activities that enhance a sense of reality, the metaverse, which strengthens the 3D technology-centered sense of presence capability, is being chosen by people. The purpose of this study is to suggest a strategic direction for the establishment of the metaverse business model of startups by presenting factors for users' use and gratification of the metaverse. In detail, this study proposes the motivation for using the metaverse by reflecting the uses and gratification theory, and suggests a method to strengthen the motivation for the metaverse by reflecting the presences provided by the metaverse plotform and individual characteristics (normtive interpersonal influence). We surveyed people over 20 years of age who experienced metaverse and obtained 314 samples. In addition, we conducted the main effect analysis using the structural equation model and the moderating effect analysis using Process 3.1. As a result of hypothesis testing, we confirmed that metaverse presence (telepresence, social presence) has a positive effect on intention to continuous use by increasing metaverse's use and satisfaction factors (information, enjoyment, social interactivity). In addition, we found that individuals' normative interpersonal influence moderated the positive relationship between uses and gratification factors(enjoyment and social interactivity) intention to continuous use. Our study suggests strategies for establishing a user-centered business model for companies related to the metaverse.

• Journal of Biomedical Engineering Research
• /
• v.30 no.2
• /
• pp.135-141
• /
• 2009

Purpose: The aim of present study is to evaluate a possibility of clinical application for the effect of low intensity ultrasound stimulation (LIUS) in mechanical characteristics of bone on osteoporotic fractures prevention. Materials and Methods: Eight virgin ICR mice (14 weeks old, approximate weight 25g) were ovariectomized (OVX) to induce osteoporosis. The right hind limbs were then stimulated with LIDS (US Group), whereas left hind limbs were not stimulated (CON Group). Both hind limbs of all mice were scanned by in-vivo micro-CT to acquire two-dimensional (2D) images at 0 week before stimulation and 3 weeks and 6 weeks after stimulation. Three-dimensional (3D) finite element (FE) models generated by scanned 2D images were used to determine quantitatively the effect of LIUS on strength related to bone structure. Additionally, distributions of Hounsfield units and elastic moduli, which are related to the bone quality, for the bones in the US and CON groups were determined to analyze quantitatively a degree of improvement of bone qualities achieved by LIUS. Results: The result of FE analysis showed that the structural strength in US Group was significantly increased over time (p<0.05), while that in CON Group was statistically constant over time (p>0.05). High values of Hounsfield units obtained from voxels on micro-CT images and high values of elastic moduli converted from the Hounsfield units were dominantly appeared in US Group compared with those in CON Group. Conclusion: These finding indicated that LIUS would improve the mechanical characteristics of osteoporotic bone via the effects of bone structure (bone strength) and quality (Hounsfield unit and elastic modulus). Therefore, the LIUS may decrease effectively the risk of osteoporotic fracture in clinics.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.370-374
• /
• 2013

The effects of zinc chloride addition on pore development of porous carbon nanofibers prepared by polyacrylonitrile (PAN)/ N,N'-dimethylformamide (DMF) (10 wt%) electrospinning were investigated. The change of morphological and structural modification by zinc chloride activation was investigated by a scanning electron microscopy (SEM) analysis. $N_2$ adsorption isotherm characteristics at 77 K were confirmed by Brunauer-Emmett-Teller (BET) and Horvath-Kawazoe (H-K) equations, and the curves showed the Type I mode in the International Union of Pore and Applied Chemistry (IUPAC) classification, indicating that lots of micropores exist in the sample. In addition, specific surface areas and total pore volumes of porous carbons prepared by the zinc chloride activation were determined as 600~980 $m^2/g$ and 0.24~0.40 $cm^3/g$, respectively. As experimental results, many holes or demolished structures were found on the fiber surfaces after the zinc chloride activation as confirmed by a SEM analysis. It was also observed that various pore sizes were found to be depended on the adding content of zinc chloride in PAN/DMF solution in this system.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2007

In recent years, many robotics researches have been focused on developing human-friendly robots, that is, humanoid biped robots. The researches of humanoid robots include various areas such as hardware development, control of biped locomotion, artificial intelligence, human interaction, etc. The present work concerns the hardware development of a mid-size humanoid robot, BONOBO, focusing on rapid development of outer body parts with integrated application if CAD/CAM/CAE/RP. Most parts are three-dimensionally designed using 3D CAD, and effectively connected with CAE analyses using both kinematic simulation and structural analysis. In order to reduce lead time and investment cost for parts developments, Rapid Prototyping (RP) and CAM are selectively utilized for manufacturing body parts. These master parts are then replicated using the vacuum casting process, from which we can obtain plastic parts repeatedly. Through this integrated approach, the first prototype of BONOBO can be successfully developed with relatively low time and investment costs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.383-386
• /
• 2005

Low frequency heavy-weight impact noise is the most irritating noise in Korean high-rise reinforced concrete apartment buildings. This low frequency noise is generated by foot traffic due to the fact that Koreans do not wear shoes at home. The transmission of the noise is facilitated by a load bearing wall structural system without beams and columns which is used in these buildings. In order to control low frequency heavy-weight impact noise, floating floors using isolation materials such as glass-wool mat and poly-urethane mat are used. However, it was difficult to control low frequency heavy-weight impact sound using isolation material. In this study, reinforcement of concrete slab using beams and plate was conducted. Using the FEM analysis, the effect of concrete slab reinforcement using FRP(fiber-glass reinforced plastic) on the bang machine impact vibration acceleration level and sound were conducted at the standard floor impact sound test building. The $3{\sim}4dB$ floor impact vibration acceleration level and impact sound pressure level were reduced and the natural frequency of slabs were changed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.291-297
• /
• 2006

In this study, the equivalent physical properties of the shielded slot plate having a lot of very tiny bridge shape structures on its plane were determined by tensile tests and structural analyses. With those results, numerical analyses for the deflection profile by gravity effect were carried out to compare with experimental results. The two results were shown coincident very well so that the estimated equivalent physical properties were verified enough for further studies such as curvature reduction for the shielded slot plate.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.83-92
• /
• 1998

${\alpha}-sulfonated$ fatty acid polyethylene glycol esters with polyethylene oxide(addition, 3, 5, 10mol) were synthesized through esterification of ${\alpha}-sulfonated$ fatty acid methyl esters with alkyl chain length $C_{12}{\sim}C_{18}$. Their compounds were separated with column chromatography, and confirmed by TLC. Quantitative analysis of all the sulfonates were performed according to JIS K-3362 method, and ethylene oxide unit number were determined by ISO 2270 method. Structural properties of ${\alpha}-sulfonated$ fatty acid methyl esters and their derivatives were also identified from IR, and $^1H$ NMR spectra.