• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.203-209
• /
• 1999

Si 기판위에 Ba2YCu3O7-$\delta$ 고온초전도체를 응용하기 위해 요구되는 buffer층으로 유망한 재료인 LaAlO3 단일상 분말을 고상반응법과 자발착한 연소반응법으로 제조하였다. 제조된 LaAlO3 분말의 입자형태와 결정상태는 scanning electron microscope (SEM)과 X-ray diffractometer (XRD)를 이용하여 분석하였다. 분말의 비표면적과 소결특성은 각각 Brunauer-Emmett-Teller(BET) 방법과 dilatometer를 측정하였다. 고상반응법으로 LaAlO3 분말을 제조할 때에는 하소온도를 150$0^{\circ}C$까지 높게 하여도 단일상을 얻는 것이 어려웠으나 자발착한 연소반응법에 의한 분말제조는 $650^{\circ}C$의 저온에서 하소하여도 쉽게 얻을 수 있었다. Dilatometer 측정을 통하여 분석해 보면, 고상반응법에 의한 분말보다 자발착한 연소반응법에 의한 분말로 제조된 소결체가 고상반응법에 의한 소결체에 비해 1.4배나 큰 소멸밀도(98.87%)를 가졌다. 이렇게 소결밀도에서 큰 차이가 나는 것은 자발착한 연소방법에 의한 분말의 평균 입자크기가 nano crystal size이고 비표면적 값(56.54 $m^2$/g)이 매우 크기 때문이다. 두가지 방법으로 제조된 분말을 이용, LaAlO3 layer를 스크린 프린팅과 소결법으로 Si 기판상에 제조하였으며 자발착한 연소합성법으로 제조된 분말은 110$0^{\circ}C$에서 우수한 소결특성을 나타내었다.

• 소성∙가공
• /
• 제8권3호
• /
• pp.294-305
• /
• 1999

A vision-based surface-strain measurement system has been still improved since the authors devel-oped the first version of it. New algorithms for the subpixel measurement and surface smoothing are introduced to improve the accuracy and precision in the present study. The effects of these algorithms are investigated by error analysis. And the equations required to calculate 3D surface-strain of a shell element are derived from the shape function of a linear solid finite-element. The influences of external factors on the measurement error are also examined, and several trials are made to obtain possible optimal condition which may minimize the error.

• 한국항공운항학회지
• /
• 제13권2호
• /
• pp.27-34
• /
• 2005

This study is performed to analyze the turbulence distribution of Fev. & Mar. in 2000 by the analysis of the parameters related with flight data of FDR(Flight Data Recorder). In the analysis, we selected the Solid State Flight Data Recorder(SSFDR) & Universal Flight Data Recorder(UFDR) flight data of the exact same aircraft(capacity 120 persons). Through this study, we verified that turbulence is concerned with configuration of the ground and flight situation of aircraft.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.401-406
• /
• 2016

Elevator is very important transportation facility of modern society. But there have been frequent elevator accidents recently. In the view of safety management of elevator, the corresponding study must be done since accidents related elevator include not only actual accident but also possible accident in order to protect user from danger. A 3D design was developed using SolidWorks and behavior analysis using FEM Code.

• Applied Microscopy
• /
• 제51권
• /
• pp.4.1-4.12
• /
• 2021

Fluorescence in situ hybridization (FISH) is a technique to visualize specific DNA/RNA sequences within the cell nuclei and provide the presence, location and structural integrity of genes on chromosomes. A confocal Whole Slide Imaging (WSI) scanner technology has superior depth resolution compared to wide-field fluorescence imaging. Confocal WSI has the ability to perform serial optical sections with specimen imaging, which is critical for 3D tissue reconstruction for volumetric spatial analysis. The standard clinical manual scoring for FISH is labor-intensive, time-consuming and subjective. Application of multi-gene FISH analysis alongside 3D imaging, significantly increase the level of complexity required for an accurate 3D analysis. Therefore, the purpose of this study is to establish automated 3D FISH scoring for z-stack images from confocal WSI scanner. The algorithm and the application we developed, SHIMARIS PAFQ, successfully employs 3D calculations for clear individual cell nuclei segmentation, gene signals detection and distribution of break-apart probes signal patterns, including standard break-apart, and variant patterns due to truncation, and deletion, etc. The analysis was accurate and precise when compared with ground truth clinical manual counting and scoring reported in ten lymphoma and solid tumors cases. The algorithm and the application we developed, SHIMARIS PAFQ, is objective and more efficient than the conventional procedure. It enables the automated counting of more nuclei, precisely detecting additional abnormal signal variations in nuclei patterns and analyzes gigabyte multi-layer stacking imaging data of tissue samples from patients. Currently, we are developing a deep learning algorithm for automated tumor area detection to be integrated with SHIMARIS PAFQ.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.25-31
• /
• 2016

본 연구에서는 항공우주, 유도탄, 자동화 산업에 널리 적용되는 금속복합화약 ZPP(Zirconium Potassium Perchlorate)의 제조공정 과 특성평가를 고찰하였다. 기본적으로 PMD에 사용되는 고체 점화제는 금속연료와 산화제 그리고 유기 고분자물질(결합재)로 구성되며, 이들 원료들을 균질하게 혼합하기 위하여 precipitation process를 사용하였다. 원료 물질의 특성 및 열적 반응 해석을 통한 최적 조성비를 설계하였으며, 이들의 입도, 형상, 열량 분석 등의 특성 평가를 수행하여 결과를 비교하였다.

• 한국농공학회논문집
• /
• 제49권4호
• /
• pp.43-49
• /
• 2007

The reinforced concrete slab is one of main structure members in the construction industry sector. However, most of researches regarding to RC slabs have been focused on two-dimensional Mindlin-type plate element on the basis of laminated plate theory since three-dimensional solid element has a lot of difficulties in finite element formulation and costs in CPU time. In reality, the RC slabs are subjected to dynamic loads like a heavy traffic vehicle load, and thus should insure the safety from the static load as well as dynamic load. Once we can estimate the dynamic behaviour of RC slabs exactly, it will be very helpful for design of it. In this study, the 20-node solid element has been used to analyze the dynamic characteristics of RC slabs with clamped edges. The elasto-visco plastic model for material non-linearity and the smeared crack model have been adopted in the finite element formulation. The applicability of the proposed finite element has been tested for dynamic behaviour of RC slabs with respect to characteristics of concrete materials in terms of cracking stress, crushing strain, fracture energy and Poisson's ratio. The effect on dynamic behaviour is dependent on not crushing strain but cracking stress, fracture energy and Poisson's ratio. In addition to this, it is shown the damping phenomenon of RC slabs has been identified from the numerical results by using Rayleigh damping.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.41-48
• /
• 2017

고체 연료의 열물성 변화가 가연물의 열분해 특성에 미치는 영향을 고찰해 보기 위해서 KS F ISO 5660-1에 제시된 콘 칼로리미터 실험을 수행하였고, Fire Dynamics Simulator (FDS) 1차원 열분해 모델의 수치해석을 수행하였다. 고체 연료로는 열분해과정 중 Char를 발생시키지 않는 Poly Methyl Methacrylate (PMMA)를 사용하였으며, 문헌에 보고된 PMMA의 열물성치와 열분해 물성치를 FDS의 입력 변수로 설정하여 콘 칼로리미터 실험의 수치해석을 수행하였다. 콘 칼로리미터 실험을 통해 측정된 고체가연물의 질량 감소 결과와 일치하는 열분해 모델의 계산 결과를 바탕으로 열물성치와 열분해 물성치의 변화가 고체 가연물의 질량 감소에 어떠한 영향을 주는지를 고찰해 보았으며, 열전도계수와 비열을 상온의 상수 값으로 입력한 경우 가연물의 질량 감소의 예측에 있어 상당한 오차를 유발할 수 있다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.266-271
• /
• 2002

We propose a hardware accelerated voxelization method for various 3D object model such as surface models, solid models, and volumetric CSG models. The algorithm utilizes the stencil buffer that is one of modern Open히 graphics hardware features. The stencil buffer is originally used to restrict drawing to certain portions of the screen. The volumetric representations of given 3D objects are constructed slice-by-slice. For each slice, the algorithm restricts the drawing areas constructed inner region of 3D objects using the stencil buffer, and generates slices of the volumetric representation for target objects. As a result, we can provide volume graphics support for various engineering applications such as multi-axis machining simulation, collision detection and finite element analysis.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2696-2707
• /
• 2021

The purpose of this study is to investigate the efficiency of various structural modeling schemes for evaluating seismic performances and fragility of the reactor containment building (RCB) structure in the advanced power reactor 1400 (APR1400) nuclear power plant (NPP). Four structural modeling schemes, i.e. lumped-mass stick model (LMSM), solid-based finite element model (Solid FEM), multi-layer shell model (MLSM), and beam-truss model (BTM), are developed to simulate the seismic behaviors of the containment structure. A full three-dimensional finite element model (full 3D FEM) is additionally constructed to verify the previous numerical models. A set of input ground motions with response spectra matching to the US NRC 1.60 design spectrum is generated to perform linear and nonlinear time-history analyses. Floor response spectra (FRS) and floor displacements are obtained at the different elevations of the structure since they are critical outputs for evaluating the seismic vulnerability of RCB and secondary components. The results show that the difference in seismic responses between linear and nonlinear analyses gets larger as an earthquake intensity increases. It is observed that the linear analysis underestimates floor displacements while it overestimates floor accelerations. Moreover, a systematic assessment of the capability and efficiency of each structural model is presented thoroughly. MLSM can be an alternative approach to a full 3D FEM, which is complicated in modeling and extremely time-consuming in dynamic analyses. Specifically, BTM is recommended as the optimal model for evaluating the nonlinear seismic performance of NPP structures. Thereafter, linear and nonlinear BTM are employed in a series of time-history analyses to develop fragility curves of RCB for different damage states. It is shown that the linear analysis underestimates the probability of damage of RCB at a given earthquake intensity when compared to the nonlinear analysis. The nonlinear analysis approach is highly suggested for assessing the vulnerability of NPP structures.