• KIEAE Journal
• /
• 제13권1호
• /
• pp.109-123
• /
• 2013

The study is to probe a technical alternative to enhance the reliability and accuracy of the results of various landscape simulations. This study to present technical criteria that are necessary in each stage of target site analysis, picture taking, and computer synthesis and, through these to present supplementary plans to enhance the reliability and accuracy of landscape simulations. In order to derive more practical and empirical results in terms of the reliability of the results of landscape simulations, examples that actually passed landscape review were selected. With regard to study process, an analysis was made first to analyze the landscape report data of designs that passed the review to analyze their characteristics, to be followed by an integrated analysis of problems that were revealed in various landscape simulations. Important factors that affect directly the work of landscape simulations such as the specification of camera lenses that were used in picture taking, distance, and angle. Design the work was carried out using Auto CAD, 3DS Max, and Photoshop program in the same way as in actual design. For verification of their accuracy and reliability, the results were entrusted to experts who have implemented similar jobs. To seduce differences from those too landscape simulations that conduct trial experiment of the virtual space that are to be created in the future with accurate numerical values.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.211-218
• /
• 2019

목적: 본 연구에서는 CAD/CAM 기술로 제작한 4가지 금속하부구조물의 변연 및 내면 적합도를 비교하여 정확도 및 임상적 효용성을 알아보고자 한다. 재료 및 방법: 상악 중절치 레진모형치아를 삭제한 뒤 복제하여 Ni-Cr 합금 표준 모형을 제작하였다. 이를 공초점 현미경방식의 구강 스캐너를 이용해 12개의 STL 파일을 얻었다. CAD 프로그램 상에서 $50{\mu}m$의 시멘트 공간을 부여한 두께 0.5 mm의 금속하부구조물을 디자인하였다. Co-Cr 금속하부구조물은 다음 4가지 방법으로 제작하였다: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). 변연 및 내면 적합도를 측정하기 위해 실리콘 복제법을 이용하였다. 측정한 결과값은 SPSS 통계 프로그램을 이용하여 일원배치분산분석(one-way ANOVA)으로 통계처리하고, 사후검정으로 Scheffe test를 시행하였으며, 5% 유의수준으로 평가하였다(${\alpha}=.05$). 결과: 변연 적합도는 WM군($27.66{\pm}9.85{\mu}m$)과 MS군($28.88{\pm}10.13{\mu}m$)이 RP군($38.09{\pm}11.14{\mu}m$)에 비해 통계적으로 유의하게 작았다. 치경부 적합도는 MS군이 RP군에 비해 통계적으로 유의하게 작았다. 축면 적합도는 WM군과 MS군이 RP군과 SLM군 보다 통계적으로 유의하게 작았다. 절단면 적합도는 RP군이 통계적으로 유의하게 작았다. 결론: Wax pattern milling & Casting, Milling & Sintering법으로 제작한 Co-Cr coping의 변연과 축면에서의 적합도가 더 우수하였다. 모든 군의 Co-Cr coping의 변연, 치경부, 축면 적합도는 임상적으로 허용할만한 범위 안에 있었다.

• 대한심미치과학회지
• /
• 제27권2호
• /
• pp.82-96
• /
• 2018

3D 프린팅은 삼차원 이미지 정보를 이용하여 레이어로 분할한 후 선택한 소재를 적층하여 가공하는 방법을 말한다. 소재를 적층하는 방법에 따라 다양한 종류의 3D 프린팅이 존재하는데 최근 치과분야에서는 SLA방식과 DLP방식으로 광원을 이용한 경화를 통해 적층 가공하는 3D 프린팅이 널리 보급되어 사용되고 있다. 전악 범위의 3D프린팅 치과용 모델은 전통적인 인상 채득으로 제작된 스톤모델보다는 다소 정확성이 부족한 것으로 보고되었으나, 같은 STL파일을 이용하여 4분악 범위를 3D 프린팅한 모델은 밀링 방법으로 가공한 모델보다 정확하였다. 디자인 소프트웨어의 활용도에 따라 보철치료의 진단, 임시 보철물의 제작, 의치의 제작이 가능하였다. 교정에서는 투명 교정 모델과 브라켓 간접 부착을 위한 트레이 제작이 가능하였다. 임플란트 수술에 있어서 CT를 기반으로 한 정확한 위치에 임플란트를 식립하는 가이드 제작에 활용하고 있다. 출력 방식의 발전으로 인하여 3D 프린터의 출력시간이 계속적으로 단축되고 있으며, 이로 인해 치과 진료실 내에서 3D 프린터가 기존의 전통적인 가공 방법을 대체할 수 있을 것으로 기대한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.62-67
• /
• 2007

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• Agricultural and Biosystems Engineering
• /
• 제5권2호
• /
• pp.45-49
• /
• 2004

Objective of the study was to develop a garlic clove metering device. The metering device consisted of a drum, a bucket and a bucket cover. A garlic clove simulator was designed to simulate motions of garlic cloves in the metering device. Simulation was performed using a multibody dynamic analysis program, RecurDyn version 5.1. Physical properties of garlic cloves such as mass and center of gravity were determined using 3D CAD modeler, IDEAS version 10.0. In order to compare the results of the simulation with actual movement of a garlic, movement of garlic clove was photographed by a high speed camera. A prototype metering device was built and tested under various metering speeds and metering guide angles. At the 12 rpm metering speed, rate of single-clove-discharge was $90.0\%$ and missing rate $1.3\%$ at $5^{\circ}$.

• 대한공간정보학회지
• /
• 제9권2호
• /
• pp.55-62
• /
• 2001

전자기술의 비약적인 발전은 측량분야에 있어 GPS나 TotalStation과 같은 침단장비의 발전을 가져왔다. CPS에 의한 측량은 수신장비의 고가로 인해 아직까지는 실무전반에 걸쳐 활용되지는 못하고 있다. 따라서 본 연구에서는 실무분야에서 일반적으로 가장 많이 이용되고 있는 토탈스테이션과 팜탑방식의 System 2000을 결합하여 지형측량을 수행하고, 팜탑에서 기본적으로 제공하는 소프트웨어와 AutoCad상에서 수치지도를 직접제작 하고 정확도 분석을 통해 토탈스테이션과 System 2000을 이용한 수치지도 제작의 타당성 및 제작된 수치지도의 활용가능성 제시를 목적으로 연구를 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.846-851
• /
• 2010

In this paper, we newly propose a novel control strategy of a three joints-robot finger for the purpose of artificial hands. The robot finger is specifically modeled by using a 3D CAD program (CATIA), considering human fingers, and then the proposed control method is verified through the dynamic simulation tool (Simulink and Recurdyn R2). Each slider is individually controlled to be located at the optimal positions where the maximal joint torque can be generated. To prove the effectiveness of the proposed control method, we devise two cases for the reference position of sliders. By comparing the control performance of two cases, the validity of the proposed control method will be verified.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.154-159
• /
• 2004

This study is aimed to diminish the errors which created during transforming from 3D shape created with CAD program to STL file formation. The length strain which created on X-Y axises at STL file transforming is diminished by using the relation between common shape error and shrinkage rate. As the result of study, we have confirmed the length strain in accordance with facetres value. Also, the shape error is compensated with shrinkage rate by error of length strain. so, we could diminish to shape error by several tens micrometer.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.118.5-118
• /
• 2002

To apply induction hardening method to a press die having 3-D free surface, the induction hardening tool moves on a press die above 1～2mm gap with constant velocity. Since the induction hardening process requires its own hardening path for each die, a direct teaching method which generates working path directly guided by operators is more suitable than an offline method using CAD/CAM data. The direct teaching apparatus in this work includes a teaching tool with a force/torque sensor and data processing computer to finally generate robot's Induction hardening program , in direct teaching operation, an operator teaches working path maintaining contact with surface of press die by holding...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.816-819
• /
• 2000

Recently the styrofoam has been used fur material of press die pattern. The object of this research is to develope an automated laser system for manufacture of press die pattern which depends chiefly on handwork during its process. After converting 3-D CAD model into cross-sectional shape information, the unnecessary part of the section is vapored away by laser. The depth and width of cut are mainly under the control of laser power and beam feed rate. The optimum manufacturing conditions are obtained by preliminary experiments. It is necessary fur precise styrofoam pattern manufacturing to develope laser system which has sufficient motion accuracy and program or beam path generation and automatic control of this system.