• 구강회복응용과학지
• /
• 제16권3호
• /
• pp.221-227
• /
• 2000

Provisional fixed partial dentures(FPDs) are an important part of many prosthodontic treatment procedures. These provisional fixed prostheses must fulfill biologic, mechanical, and esthetic requirements to be considered successful. Consideration of all these factors and requirements are important because provisional resin restorations may be worn over a long period to assess the results of periodontal and endodontics therapies, and also during the restorative phase of implant reconstructive procedures. This in vitro study examined flexual strength of four resins commonly used for fixed provisional prostheses. The effects of polymerization conditions were also evaluated. The four resins tested were : Caulk Temporary bridge resin(L.D. Caulk Co. Dentsply International Millford), Jet(Lang Dental Mfg. Co. Chicago. ILL. U.S.A), Alike (Coe Laboratories. Inc. Chicago. ILL. U.S.A) and Tokuso Curefast (Coe Laboratories. Inc. Chicago. ILL. U.S.A) The test specimens were 65mm long, 14mm wide, and 3.5mm thickness. 10 specimens of four resins were cured for 15 minutes at atmospheric pressure and 10 specimens of four resins were cured at an additional pressure of approximately 20 psi. A total of 80 specimens were prepared. The flexual strength was determined by three-point bending test. Data were analysed with the Paired samples T-test and Tukey student-range test Within the limitations imposed in this study, the following conclusions can be drawn : 1. Under the condition of bench curing, Caulk Temporary bridge resin showed the highest flexual strength. In decreasing order, the flexual strength of the other materials was as follows : Jet, Tokuso Curefast, Alike, and Caulk Temporary bridge resin demonstrated significantly higher strength than other resins. 2. Under the condition of pressure curing, Jet showed the highest flexual strength. In decreasing order, the flexual strength of the other materials was as follows : Caulk Temporary bridge resin, Tokuso Curefast, and Alike. There were all statistically significant differences among four resins 3. There was a statistically significant difference between bench- and pressure-cured specimens in all four materials.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.40-50
• /
• 2010

연결성이 좋지 않은 노두, 주향 경사 등의 지질 구조선을 연결하여 지질도를 작성하는 과정은 지질학자의 주관적인 견해를 배제하기 어렵다. 따라서 이러한 지질도는 좁은 지역들에서 나타나는 노두의 복잡한 공간적 분포를 이용하여 해석하게 된다. 또한, 물리탐사 자료를 이용하여 부족한 지질구조 정보를 보완하는 연구들이 수행되고 있으나, 물리탐사 자체가 가지는 역산해의 비유일성 및 각 지질 구조간의 물성 차이에 대한 불확실성으로 인하여 많은 제한점을 갖고 있다. 이번 연구에서 제안하는 방법은 예비 지질 모델 구현에 이용될 수 있는 물리탐사 자료 해석을 통해 획득된 구조 경계 정보와 지형학 자료의 삼점 해석 결과를 이용하여 주향 경사와 같은 지질 구조 정보를 제공할 수 있다. 이를 통하여 추정된 지질 정보들이 지질 조사를 통해 획득된 정보와 결합되기 위해서는 공간 규모 측면에서의 호환 가능성이 검증되어야 하며, 검증된 자료들은 평면상의 자료로 구성되어 지질학자들이 지질도를 작성하는 과정의 초기 자료로 이용되어진다. 따라서 해석된 지질도는 추정된 지질 정보와 공간적 구조적으로 부합되어져야 한다. 이 연구에서 개발된 알고리즘은 캐나다 뉴브런즈윅주 배서스트 광산 부근 두 지역의 습곡구조에 적용하여 해석하였다.

• 한국물환경학회지
• /
• 제29권3호
• /
• pp.354-364
• /
• 2013

The performance of the stormwater wetlands can be significantly influenced by antecedent stormwater in storage at the commencement of a stormevent. As inflows are intermittent and stochastic in nature, the evaluation of the treatment efficiency of a stormwater wetland should be considered by runoff capture and water treatment characteristics during interevent periods. In this study, analytical probabilistic model is applied to identity runoff capture rate and treatment efficiency of the stormwater wetland. To achieve this, continuous rainfall data recorded in Busan for 31 years has been analyzed to derive the runoff capture rate, and 1st order kinetic decay constants ($k_V$, 1/d) are calculated from regression analysis to identify pollutants removal during interevent periods. The results show that about 60.9% of annual average runoff is captured through the stormwater wetland. The annual average treatment efficiencies of SS, BOD, COD, TN and TP is about 11.4, 8.9, 9.8, 4.3 and 9.6%, respectively. The analytical model has been compared with the numerical model and it shows that analytical model is valid. Performance evaluation methods developed in this study has the advantages of considering characteristics of rainfall-runoff, facility type and pollutant removal.

• 콘크리트학회지
• /
• 제6권1호
• /
• pp.131-141
• /
• 1994

본 실험적 연구는 강섬유의 길이와 혼입율이 콘크리트의 파괴인성과 강도에 미치는 영향을 고찰하기 위하여 수행되었다. 강섬유의 길이(30,60mm)와 혼입율(0.0, 0.5, 1.0, 1.5, 2.0%)을 달리한 노치를 가진 강섬유보강콘크리트 보를 제작하여 3점 휨시험을 하였으며, 그 실험결과로부터 파괴에너지, CMOD 및 휨강도 등을 구하였다. 또한 파괴에너지로부터 콘크리트의 파괴인성을 평가하였다. 연구결과, 콘크리트의 파괴인성과 강도는 전반적으로 강섬유의 혼입율이 증가할수록 증가하였으며 강섬유의 길이는 휨강도에는 큰 영향을 주었으나 파괴인성과 압축강도에는 거의 영향을 주지않았다. 또한 강섬유의 분산성, 시공연도 및 굵은골재의 최대치수 등을 고려할 때, 콘크리트의 파괴인성과 강도측면에서 강섬유의 혼입율은 1.0%정도가 최적이라 판단되며, 그길이가 긴 경우 약간 유리하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권3호
• /
• pp.1463-1467
• /
• 2016

Background: The incidence of breast cancer is rapidly increasing in Yemen with recent indications of constituting one-third of female cancers. The main problem in Yemen remains very late presentation of breast cancer, most of which should have been easily recognisable. Since stage of disease at diagnosis is the most important prognostic variable, early diagnosis is an important option to be considered for control of breast cancer in low resourced settings like Yemen. In the present study, we aimed at describing breast cancer knowledge, perceptions and breast self-examination (BSE) practices among a sample of Yemeni women. Materials and Methods: This cross-sectional study covered 400 women attending four reproductive health centres in Aden, Yemen through face-to-face interview using a structured questionnaire during April - July 2014. We collected data on sociodemographic characteristics, knowledge about breast cancer, and screening practices as well as respondents' perceptions based on the five sub scales of the Health Belief Model (HBM): perceived susceptibility; perceived severity; perceived barriers; perceived benefits; and self-efficacy. The response format was a five-point Likert scale. Statistical Package for Social Sciences (SPSS 20) was used for statistical analysis. Statistical significance was set at p<0.05. Logistic regression analysis was conducted with BSE as a dependent variable. Results: The mean age of women was 26.5 (S.D=5.6) years. The majority (89.0%) had never ever performed any screening. Two-thirds of respondents had poor knowledge. Perceived BSE benefits and self-efficacy and lower BSE barriers perception were significant independent predictors of BSE practice. Conclusions: Poor knowledge and inadequate BSE practices are prevailing in Yemen. The need for implementing culturally sensitive targeted education measures is mandatory in the effort to improve early detection and reduce the burden of breast cancer.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.159-166
• /
• 2012

위치를 추적하기 위해 사용되는 대표적인 방법은 위성항법시스템(GPS)과 관성 항법장치(INS)이다. 위성항법장치는 어떤 한 지점에 대해 오차가 발생할 수 있으나 누적 오차가 없다는 장점이 있다. 위치 정보를 얻기 위해서 3개 이상의 위성으로부터 GPS정보를 수신하여야 하나 수신 강도가 약하거나 터널과 같은 수신 불능지역인 지역에서는 위성항법시스템의 정보를 획득할 수 없다는 단점이 있다. 관성항법장치의 경우 자이로스코프 및 가속도계의 정보를 이용하여 항체의 위치 및 자세 정보를 수Hz부터 수백 Hz의 높은 데이터 송수신율로 속도 및 방향을 측정한다. 관성항법장치는 짧은 시간 동안 매우 정밀한 항법 성능을 나타내지만 가속도 및 각속도에서 속도성분으로 적분하는 과정에서 오차가 누적되어 시간이 경과함에 따라 항법 오차가 증가하는 단점이 있다. 본 논문에서는 이 두 시스템의 단점을 상호 보완하여 위성항법장치와 관성항법장치의 위치 정보에 센서융합 알고리즘 적용 및 실험을 통하여 성능분석을 하였다. 위성항법시스템의 수신 불능지역에서는 측정된 데이터를 SVD를 이용하여 모델링한 후 위치 보정 알고리즘을 적용하여 위치 정보를 획득하는 실험 결과를 통해 확인한다.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.714-725
• /
• 2003

The theory of the current-type electromagnetic flowmeter for a high temporal resolution was developed for two-phase flow measurements. To predict the output of the current-type flowmeter, the three-dimensional virtual potential distribution C and the newly introduced flow pattern coefficient f were derived and computed. The output of flowmeter depends on the liquid conductivity (sensitive to temperature) and flow configurations of the two-phase flow with the sinusoidal excitation over 100 Hz. The flow pattern coefficient was specially devised to separate the dependency on the flow configuration of the two-phase flow from that on the liquid conductivity which can be expressed with the calibration of single-phase flow. Using the finite difference method, the three-dimensional virtual potential distributions were computed for the electrode of finite size. By taking derivative of the virtual potential, the weight functions were evaluated and compared with existing analytic series solution for the point-electrode. There was a reasonable correspondence between the present and existing results. In addition, the flow pattern coefficients were evaluated for annular flows with various film thicknesses, and compared with the experimental results by the impedance spectroscopy. The numerical results agreed well with the experimental data.

• 한국식품조리과학회지
• /
• 제21권4호
• /
• pp.514-527
• /
• 2005

The purposes of this study were firstly to optimize the recipe for iced cookies by cooking with five different ingredient levels of $Jinuni\;bean(X_1),\;butter(X_2)\;&\;sugar(X_3)$ and secondly to analyze the chemical and sensory test results by using RSM(Response Surface Methodology). As a result of this test, water activity decreased with increasing contents of butter or sugar, while hydrophilic browning decreased independently with increasing sugar content. There was a positive correlation(p<.001) between specific gravity and hardness, although the result was not uniform due to the interaction of each factor. There was a negative correlation(p<.001) between the spread ratio and gravity or hardness, and it tended to increase with increasing each content. Color value L and color value a had positive correlation (p<.001) and the value tended to decrease with increasing the quantity of Jinuni bean. Generally, the strength of the cookies showed a saddle point at the peak of the 3d graph. As a result of sensory evaluation, the color was sensitive to the contents of sugar and Jinuni bean, the texture was sensitive to the contents of butter and sugar, and the taste and overall quality were sensitive to all three factors. Color had a positive correlation(p<.05) with the taste, texture and overall quality. There were high positive correlations(p<.001) between the taste, texture and overall quality. The preference data showed an up-swollen, parabolic shape in the center of the 34 graph, which enabled the optimum value to be determined and the optimum mixture ratio which fulfilled all sensory items was Jinuni bean 93g, butter 188.5g and sugar 155g, indicating a substitution of flour by $44\%$.

• 한국농공학회지
• /
• 제12권4호
• /
• pp.2078-2083
• /
• 1970

The purpose of this study is to give the data neccesary for improving the planning of drainage structures, specially inverted siphons, in irrigation channels. With the samples of 15 drainage inlets, one drainage flume, 16 drainage inverted siphons and 6 drainage culverts in the 3 lines of irrigation channel under Chong-Won Irrigation Association, author abtained the following results. 1. It is presumed that design drainage discharge should be determined with some additional reserves, on the basis of the maximum rainfall intensity in local area and the size of drainage area on the topographical map, avoiding the way of eye measure. 2. Location of drainage inlet should be kept away from the place where topography can make lots of wash load, but when unavoidably allowing the inflow into irrigation channel, wash load outlet with even the purpose of drainage, or drainage flume in stead of drainage inlet should be taken account of. 3. It is presumed that drainage flume may be the structure which can perform its function from a structural point of view as far as topography permits. 4. Drainage inverted siphon should be avoided at any place as much as possible; a) In case that location of the siphon would be permitted only at paddy field, drainage area hauing the amount of discharge which requires more than 90cm in diameter could only be allowed. b) In this case, crest elevation of the tank of both inlet and outlet, at least, should not be lower than the surface level of paddy field. c) As far as topography and stratum permit, ratio of depth of outlet tank to head drop should be decreased as much as possible so that discharging efficiency of wash load could increase. d) In case of avoiding the setting of the siphon, irrigation aqueduct, irrigation inverted siphon, or drainage flume should be recommended in accordance with topography. 5. Discharging capability of wash load by drainage culvert appeared to depend hardly upon the diameter of the culvert, but greatly upon the location, specially near village, for there stones and dirts dumped may considerably be piled up. So, a counter plan for that is required.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.129-138
• /
• 2004

본 연구는 현장 계측 실험에 의하여 주행 차량하중을 받는 2경간 P.S.C. 박스형 교량의 동적 해석을 수행하였다. 본 연구에서 적용한 이동하중은 차량 속도의 증가에 대해 주행하중, 급제동하중, 연행하중, 역주행하중, 역 주행 충격하중 등으로 분류하여 실험을 행하였다. 각 주행 하중에 대해 박스 거더 단면에서의 계측위치를 달리하여 동적 거동의 변화 및 특성을 살펴보았으며, 절점당 6개의 자유도를 갖는 4절점 쉘요소를 이용한 유한요소 해석 프로그램을 개발하고 수치해석을 하여 실험결과와 비교 분석하였다. 박스 거더의 동적 거동은 주행하중에 의한 응답보다 급제동이나 역주행 충격하중에 의한 응답이 더 크게 나왔으며 수치해석 결과는 기존의 1차원 보요소를 사용하여 해석한 결과보다 실험값에 근접함을 보였다.