• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.545-551
• /
• 2017

It is very important to effectively obtain the information related to the human body shape for user-centered design. The human body shape is a huge combination of various irregular curves and is typically obtained by a 3-D Scanner. 3-D scanners show high reliability; however, they are expnsive equipment with limited mobility. 3-D models of irregular-shaped curves were created by a photogrammetric approach and the errors between the original curve and the models were evaluated. 3-D models were created based on 160, 80, 40, 20, 10, and 5 marking points evenly located on the original curve. In the case of convex curve, low levels of residuals were observed in the models from 160, 80, 40, and 20 marking points (0.13% max). In the combination of convex and concave curves, relatively low levels of residuals were observed in the models from 160, 80, and 40 marking points (0.29%). It is possible to conclude that marking points should be placed at every 5% of overall length of a convex curve and at every 2.5% of overall length of a curve with convex and concave curve in order to maintain low levels of errors. A photogrammetric approach can be used as an alternative for the 3-D scanners with advantages of low cost and mobility.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.110-117
• /
• 2018

The development of prosthetic hand or prosthetic leg equipment is steadily taking place globally. Though it would be difficult to create or feel the same way as a human hand, it would be a great for the amputated person if they can pick things up or do some movement as they want. It has become possible to develop low-cost prosthetic hand according to development of 3D printing technology. If people can develop personalized prosthetic equipment at similar prices to meet this trend, the utilization and penetration rate will be much higher. In this study, it describes how to develop a user-customizable prosthetic hand using 3D printing. To do this, the transformational parameters of prosthetic hand shape modeling are extracted as variability values, and the functions for controlling prosthetic hand motion are designed as software design patterns. This allows people who need a prosthetic hand to have their own prosthetic hand at a fast and affordable price.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.89-95
• /
• 2023

In January 2007, the Remains Excavation and Investigation Team of the Ministry of National Defense was established, and full-scale excavation of remains was promoted. Currently, the scope of the excavation is being expanded to Baekma Hill within the DMZ, where fierce battles were fought during the Korean War. Now, many remains and remains are being excavated in Baekma hill. Most are in damaged condition. Therefore, in this study, the original form of the excavated remains was restored using 3D scanning and 3D modeling. This digital restoration method can be an alternative to compensate for the disadvantages of the manual method. Currently, various digital restorations using 3D technology are active in the field of cultural heritage. Digitally restored materials can be used as basic data for digital heritage. Based on this, various contents related to excavation of remains and patriots and veterans can be developed. Furthermore, if digital human restoration is made based on the excavated remains, it will be possible to reproduce the appearance of the dead.

• Journal of Integrative Natural Science
• /
• v.5 no.1
• /
• pp.32-37
• /
• 2012

Chemokine receptor antagonists have potential applications in field of drug discovery. Although the chemokine receptors are G-protein-coupled receptors, their cognate ligands are small proteins (8 to 12 kDa), and so inhibiting the ligand/receptor interaction has been challenging. The application of structure-based in-silico methods to drug discovery is still considered a major challenge, especially when the x-ray structure of the target protein is unknown. Such is the case with human CCR2 and CCR5, the most important members of the chemokine receptor family and also a potential drug target. Herein, we review the success stories of combined receptor modeling/mutagenesis approach to probe the allosteric nature of chemokine receptor binding by small molecule antagonists for CCR2 and CCR5 using Rhodopsin as template. We also urged the importance of recently available ${\beta}2$-andrenergic receptor as an alternate template to guide mutagenesis. The results demonstrate the usefulness and robustness of in-silico 3D models. These models could also be useful for the design of novel and potent CCR2 and CCR5 antagonists using structure based drug design.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.495-507
• /
• 2021

With the recent industrial development, accidental pollution in riverine environments has frequently occurred. It is thus necessary to simulate pollutant transport and dispersion using water quality models for predicting pollutant residence times. In this study, we conducted a field experiment in a meandering reach of the Sum River, South Korea, to validate the field applicability and prediction accuracy of RAMS+ (River Analysis and Modeling System+), which is a two-dimensional (2D) stream flow/water quality analysis program. As a result of the simulation, the flow analysis model HDM-2Di and the water quality analysis model CTM-2D-TX accurately simulated the 2D flow characteristics, and transport and mixing behaviors of the pollutant tracer, respectively. In particular, CTM-2D-TX adequately reproduced the elongation of the pollutant cloud, caused by the storage effect associated with local low-velocity zones. Furthermore, the transport model effectively simulated the secondary flow-driven lateral mixing at the meander bend via 2D dispersion coefficients. We calculated the residence time for the critical concentration, and it was elucidated that the calculated residence times are spatially heterogeneous, even in the channel-width direction. The findings of this study suggest that the 2D water quality model could be the accidental pollution analysis tool more efficient and accurate than one-dimensional models, which cannot produce the 2D information such as the 2D residence time distribution.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2693-2696
• /
• 2003

The national standard physique research of Korea is being conducted every 5-6 year term after its first research was started in 1979, the fourth research was conducted in 1997. The result of the national physique research was reflected in manufactured goods design of allied industries such as clothing, shoes, furniture. In this thesis, we measured anthropometry value for every bodily figurative classification after dividing users according to gender, age, bodily figure using the result of the national standard physique research. We constructed 3D character through the process of analyzing interrelation of measured anthropometry and measuring representative category. For the process for organization, we measured anthropometry which can express sports action of golf, tennis and etc effectively. We made it by Presenting measurement which is able to form each type of 3D character after the category was decided. Quantitative and objective valuation for posture and action became possible by developing visible information offer and posture action analysis protocol in theoretical approach for analysis of posture and action in sports.

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.524-538
• /
• 2018

Objective: This study aimed to identify the size distributions of particulate matter emitted during 3D printing according to operational conditions and estimate particle inhalation exposure doses at each respiratory region. Methods: Four types of printing filaments were selected: acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA), Laywood, and nylon. A fused deposition modeling (FDM) 3D printer was used for printing. Airborne particles between 10 nm and $10{\mu}m$ were measured before, during, and after printing using real-time monitors under extruder temperatures from 215 to $290^{\circ}C$. Inhalation exposures, including inhaled and deposited doses at the respiratory regions, were estimated using a mathematical model. Results: Nanoparticles dominated among the particles emitted during printing, and more particles were emitted with higher temperatures for all materials. Under all temperature conditions, the Laywood emitted the highest particle concentration, followed by ABS, PLA, and nylon. The particle concentration peaked for the initial 10 to 20 minutes after starting operations and gradually decreased with elapsed time. Nanoparticles accounted for a large proportion of the total inhaled particles in terms of number, and about a half of the inhaled nanoparticles were estimated to be deposited in the alveolar region. In the case of the mass of inhaled and deposited dose, particles between 0.1 and $1.0{\mu}m$ made up a large proportion. Conclusion: The number of consumers using 3D printers is expected to expand, but hazardous emissions such as thermal byproducts from 3D printing are still unclear. Further studies should be conducted and appropriate control strategies considered in order to minimize human exposure.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.469-476
• /
• 2022

As the 3D modeling technology and conversational algorithm is developed, digital humans are being used in various fields, and also virtual bankers have begun to appear in banks, including major banks such as Shin-Han Bank and Nong-Hyup Bank. However, most of the research of digital human mainly focus on its appearance, and research on robot persona that should be considered in anthropomorphizing a robot is insufficient. In this study, an experiment was conducted to find out the user experience of three scenarios (student ID receipt, deposit and withdrawal account opening, leasehold loan consultation) in which the level of anthropomorphism of the speech strategy and the level of personal information use differed in the specific context of banking. As a result of the study, social presence and usefulness had an interactive effect on the scenario and the level of anthropomorphism. There was no interaction effect on intimacy, trustworthiness, and perceived intelligence, but a tendency could be confirmed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.135-136
• /
• 2019

본 논문에서는 스마트폰을 이용한 3 차원 인체 복원 시스템을 제안한다. 모바일에서의 인체 복원은 디바이스상의 한계로 인해 기기와 서버 간에 인체 모델링 과정을 분할하여 처리한다. 분할된 인체모델링 과정은 복원 과정과 출력 과정으로 나뉘게 되며 안드로이드 기반의 스마트폰을 사용하여 취득한 영상을 서버로 전송하고 3 차원 인체 복원을 수행하게 된다. 3 차원 복원 알고리즘은 인체 변형 모델을 기반으로 3 차원 모델로부터 2 차원 영상으로의 투영을 통해 최적의 자세 및 체형 매개변수를 추정하고 복원된 결과는 모바일로 전송되어 복원된 모델링 결과를 출력한다.