• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.113-139
• /
• 2016

The nonlinear seismic responses of steel buildings with perimeter moment resisting frames (PMRF) and interior gravity frames (IGF) are estimated, modeling the interior connections first as perfectly pinned (PPC), and then as partially restrained (PRC). Two 3D steel building models, twenty strong motions and three levels of the PRC rigidity, which are represented by the Richard Model and the Beam Line Theory, are considered. The RUAUMOKO Computer Program is used for the required time history nonlinear dynamic analysis. The responses can be significantly reduced when interior connections are considered as PRC, confirming what observed in experimental investigations. The reduction significantly varies with the strong motion, story, model, structural deformation, response parameter, and location of the structural element. The reduction is larger for global than for local response parameters; average reductions larger than 30% are observed for shears and displacements while they are about 20% for bending moments. The reduction is much larger for medium- than for low-rise buildings indicating a considerable influence of the structural complexity. It can be concluded that, the effect of the dissipated energy at PRC should not be neglected. Even for connections with relative small stiffness, which are usually idealized as PPC, the reduction can be significant. Thus, PRC can be used at IGF of steel buildings with PMRF to get more economical construction, to reduce the seismic response and to make steel building more seismic load tolerant. Much more research is needed to consider other aspects of the problem to reach more general conclusions.

• Structural Engineering and Mechanics
• /
• 제64권3호
• /
• pp.361-379
• /
• 2017

In this article, the vibration behavior of double-bonded sandwich microplates with homogeneous core and nanocomposite facesheets reinforced by carbon nanotube and boron nitride nanotube under multi physical fields such as 2D magnetic and electric fields is investigated. Symmetric and un-symmetric distributions of nanotubes are considered for facesheets of sandwich microplates such as uniform distribution and various functionally graded distributions. The double-bonded sandwich microplates rest on visco-Pasternak foundation. Material properties of sandwich microplates are obtained by the extended rule of mixture. The sinusoidal shear deformation theory (SSDT) is employed to describe displacement fields of sandwich microplates. Also, the dimensionless natural frequency is obtained by classical plate theory (CPT) and compared with the obtained results by SSDT. It can be seen that the obtained dimensionless natural frequencies by CPT are higher than SSDT. In order to study the material length scale parameters, modified strain gradient theory at micro scale is utilized and then, the equations of motion are derived using Hamilton's principle. The effects of different parameters such as foundation parameters including Winkler, shear layer and damping coefficients, various distributions and volume fraction of nanotubes, core to facesheet thickness ratio, aspect and side ratios on the dimensionless natural frequencies are discussed in details. The results of present work can be used to optimum design and control of similar systems such as micro-electro-mechanical and nano-electro-mechanical devices.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.57-65
• /
• 2001

본 연구에서는 자왜형 초음파 트랜스듀서의 도파봉을 이론적으로 해석하고 그 타당성을 유한요소 해석법으로 검증하였으며 두 해석법의 결과는 서로 잘 일치하였다. 본 연구에서 유도한 이론적 해석법은 유한요소 해석법에 비해서 빠른 시간 내에 주어진 주파수를 만족시키는 도파봉 길이를 결정할 수 있는 반면, 차단 주파수 (cut-off frequency)를 넘어서는 범위에서만 해석이 가능하다는 단점을 가진다. 해석결과 현수선 도파봉 (catenoidal horn)이 지수함수 도파봉 (exponential horn)에 비해서 더 큰 변위 증폭을 가져왔고, 현수선 형상 길이가 짧을수록 더욱 큰 변위로 증폭시킬 수 있었다. 해석 결과를 바탕으로 공기중에서 공진 주파수 20.8 ㎑를 가지는 자왜형 초음파 트랜스듀서를 제작하여 성능을 측정하였다. 자왜형 트랜스듀서는 수중에서 19.3㎑의 공진 주파수와 199 dB의 최대 SPL (Sound Pressure Level)을 가지고 무지향성의 특성을 보였다.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1569-1575
• /
• 2012

본 논문은 AUTODYN-3D 프로그램을 이용한 방탄 헬멧의 탄도충격에 관한 연구를 하였다. 두 가지 유형의 재료가 방탄 헬멧에 사용되었다. Kevlar 및 Steel/Kevlar 혼합복합재 이다. 강구와 7.62 mm 금속피복탄이 시뮬레이션에서 사용되었다. 시뮬레이션에서 발사체의 변형된 형상과 내부에너지가 계산되었다. 결과는 Steel/Kevlar 헬멧을 관통하기 위해 요구되는 충격속도는 강구와 7.62 mm 금속피복탄에 따라 각각 655 m/s 와 845 m/s 이상이다. 결과로부터 Kevlar 와 Steel/Kevlar 헬멧 사이의 탄도 저항에 큰 차이를 볼 수 있었다. NIJ-STD-0106.01 Type II헬멧에 대한 시뮬레이션으로 충격 속도 358 m/s 의 7.62 mm 금속피복탄이 사용되었다. 시뮬레이션 결과는 Steel/Kevlar 헬멧이 충격 속도 358 m/s 의 7.62 mm 금속피복탄을 방어할 수 있는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.207-222
• /
• 2010

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.77-86
• /
• 1999

대체로 황천 운행 시 선체와 파도의 상대적인 운동에 의하여 발생하는 파랑충격하중을 고려하여 선수 구조부를 설계하고 있다. 선수 구조부의 파랑충격현상은 대단히 복잡한 현상을 나타내고 있고 정확하게 규명하기 어렵기 때문에 경험적인 설계에 의존하고 있다. 본 연구에서는 첫 단계로서 동적 비선형 범용 프로그램 LS/DYNA3D를 이용하여 선수 구조부의 손상 자료로부터 역으로 파랑충격하중을 추정하고, 파랑충격압력 곡선의 극치, 지속시간, 후부높이, 극치발생시간 등과 같은 특징에 대한 파라메트 연구를 수행하고자 한다. 본 연구를 통하여 파랑충격하중에 대한 구조물의 동적 거동은 주로 충격압력역적에 의하여 영향을 받고, 또한 구조물에 최대 변형이 발생하기 이전에 가하여진 충격압력역적이 거동에 매우 큰 영향을 미친다는 것을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.156-162
• /
• 2008

클램프 조인트를 이용하여 도로교 바닥판에 적용하기 위하여 실물 크기의 보 공시체를 이용하여 피로 내구성 실험을 수행 하였다. 실제 바닥판에서 발생하는 응력 상태를 가정하여 조인트 부에 주로 전단력이 작용하는 공시체(RC Type), 휨모멘트가 주로 작용하는 공시체(PSC Type), 순전단 타입공시체 3종류에 대해서 내구성 평가를 실시하였다. 클램프 조인트의 보 공시체에 대한 휨/전단 피로 실험의 결과 현행 설계 하중 레벨에서는 클램프 조인트는 루프 철근의 겹침길이에 상관없이 충분한 피로 내구성을 가지고 있다. 또한, 반복하중에 의한 피로 내구성 실험에 있어서도 조인트부의 강성 저하에 의한 변형을 고려하여 조인트 폭은 1.5D 이상으로 하면 충분한내구성이 있다는 결과를 얻었다.

• Elastomers and Composites
• /
• 제15권3호
• /
• pp.147-154
• /
• 1980

The cellular rubber products for industrial purpose have been applied in many fields such as auto-motive parts, ship-building, machinery, sports goods, diving suit or interior housings etc. The purpose of this dissertation is to study the physical properties of celluar rubber products particulary for those elastomers such as EPDM, CR and NBR with heat resistance property, weather proofness, and oil resistance characteristics respectively, aiming at improving their quality, and renovating the manufacturing know-how which is beyond our technical power at the present time in Korea. In order to meet this requirement an ideal recipe is being shown for the three elastomers, and also a practical recipe which is easily available in terms of compounding ingredients in domestic market has set up as shown in Table 1. for the investigation of vulcanization characteristics by means of Rheometer. The optimum Mooney viscosity of compounded rubber was found to be approximately $ML_{1+4}(100^{\circ}C)$ $30\sim45$. Excess mustication makes a dispersion of ingredients worse, consequently it causes deformation of shapes and heterogenous cell distribution. In other words the articles are rejected because of its insufficient workmanship. The results of physical properties of the products are indicated in Table 3. It has shown that the quality meet requirement when tested in accordance with ASTM D572, 573 and D 395. The test results o CR/IR blends in terms of hardness, volume change by blowing, tensile strength and elongation have been shown.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.81-88
• /
• 2018

Seismic isolation systems have typically been used in the form of base seams in mid-rise and low-rise buildings. In the case of high-rise buildings, it is difficult to apply the base isolation. In this study, the seismic response was analyzed by changing the installation position of the seismic isolation device in 3D high - rise model. To do this, we used 30-story and 40-story 3D buildings as example structures. Historic earthquakes such as Mexico (1985), Northridge (1994) and Rome Frieta (1989) were applied as earthquake loads. The installation position of the isolation device was changed from floor to floor to floor. The maximum deformation of the seismic isolation system was analyzed and the maximum interlaminar strain and maximum absolute acceleration were analyzed by comparing the LB model with seismic isolation device and the Fixed model, which is the base model without seismic isolation device. If an isolation device is installed on the lower layer, it is most effective in response reduction, but since the structure may become unstable, it is effective to apply it to an effective high-level part. Therefore, engineers must consider both structural efficiency and safety when designing a mid-level isolation system for high-rise buildings.

• 해양환경안전학회지
• /
• 제27권4호
• /
• pp.521-528
• /
• 2021

본 연구는 손상된 선박용 절탄기 핀튜브에 대하여 보수를 목적으로 Inconel 625 아크 열용사 코팅기술 적용 후 실링처리를 실시하였다. 모재(Substrate), 열용사 코팅(Thermal Srpay Coating; TSC) 그리고 열용사 코팅+실링처리(TSC+Sealing) 시편에 대하여 내구성을 평가하기 위해 ASTM G76-05에 의거하여 고상입자 침식(Solid Particle Erosion; SPE) 실험을 실시하였다. 표면 손상 형상은 주사전자현미경과 3D 레이져 현미경을 통해 관찰했으며, 무게 감소량과 표면 거칠기 분석을 실시하여 내구성을 평가하였다. 그 결과 내구성은 TSC와 TSC+Sealing에 비해 Substrate가 우수하게 나타났으며, 이는 TSC 층 내에 존재하는 다수의 기공 결함에 기인한 것으로 판단된다. 또한 고상입자 침식 손상 메카니즘은 Substrate의 경우 연성 재질 특성인 소성변형과 피로에 의한 균열 생성이 동반되었으며, TSC와 TSC+Sealing의 경우 취성파괴 경향이 확인되었다.